Sensor Fail
-
I am back looking at mysensors after giving up 18 months ago.
The gateway seems to load ok (debugging on)
My sensor on the other hand is reporting
!TSM:FPAR:NO REPLY
while this is going on nothing is appearing on the debug screen of the gateway
Any ideas would be welcome.
-
I am back looking at mysensors after giving up 18 months ago.
The gateway seems to load ok (debugging on)
My sensor on the other hand is reporting
!TSM:FPAR:NO REPLY
while this is going on nothing is appearing on the debug screen of the gateway
Any ideas would be welcome.
Hi @crazynight, welcome to the MySensors community!
Seems like the node is unable to send messages to the gateway.
If you are using the nrf24 radio, the cause of the communication problem is most likely insufficient/unstable power.
If you haven't already, see https://forum.mysensors.org/topic/666/debug-faq-and-how-ask-for-help/ for the most common causes and how to troubleshoot them. It also contains a checklist of what information is most useful to post so people can assist you.
