FHEM requesting time from controller
-
Hi All,
Could somebody explain how to get time from gateway?
I uploaded sketch TimeAwareSensor but it doesn't receive time.- Martin
-
@l154
A ridiculously late answer (did it ever work for you?). I haven't tried that sketch but to promote myself it works great for me in this project. Unlike with my Vera I haven't yet noticed it failing even once.
-
Had the same Problem!
I'm totaly new to MYSENSORs and my gateway runs on an Arduino pro mini 8MHz attatched to a Pi.
Funny thing was that the controller is able to send data at 115.2kbaud but can't read at that speed when clocked with 8MHz ( as explained here : http://forum.mysensors.org/topic/1483/trouble-with-115200-baud-on-3-3v-8mhz-arduino-like-serial-gateway-solution-change-baudrate).
Solution: Set your baudrate to 57600 end reupload the sketch.
Took me quite a while bevor I figured that one out.Hope that helps anyone how encounters the same Problem.
Suggested Topics
-
Data logging Options
Vera • 1 Apr 2014, 00:16 • NotYetRated 22 May 2014, 19:30 -
Sensor to control remote controlled switches from Flamingo.eu e.g. mumbi m-FS300
My Project • 8 Feb 2015, 19:29 • Heinz 26 Feb 2015, 19:36 -
Simple Temp/Light/Time setup with LCD 1.4 (no beta anymore)
My Project • 13 Aug 2014, 12:00 • John 31 Aug 2014, 21:47 -
Sensor for Vallox DigitSE RS485 ventilation system with integration into FHEM.
My Project • 8 Feb 2015, 19:48 • Heinz 10 Jul 2020, 12:16 -
Control a switch receiver via FHEM!!!
Controllers • 7 Feb 2015, 11:59 • Skud123 7 Feb 2015, 15:58 -
How to get sensor data into influxdb?
General Discussion • 25 May 2017, 16:35 • MaKin 10 Jul 2017, 13:17
