Stop Domoticz
Copy de Databse to your pc
( make a backup of the database )
Use SQLLite Expert Personal to edit the database
Go to "Device Status" and look for the row on the right side with your device
Double click on the row, goto "SValue", edit this, click ok, clock ok again.

Then the most important one:

On the leftside goto "MySensorsVars", click on it, on the right side you will see your MySensors devices, click on your device and edit the "Value"

Both SValue and Value should be the same and match whatever your whatever meter reads when you start using your sensor.

Regards

Alex

@Mediacj

I am still working on the S0 sketch, the problem I have is how to set the starting value, how did you solve this ?

@Koresh

Sorry for the late reply, our second son was born just 2 weeks ago.... no sleep anymore

It looks like this one, except mines it labelled: 0935VI, the one on the link 0935VJ

http://www.aliexpress.com/store/product/NRF24L01-QFN20-24L01-SMD-chip-new-original-SDQYS/1823911_32468479303.html

@Koresh

Ermm... how do I know it works correctly ?, and if it doesn't work correctly which 1M resistor do I have to use ?

Thanks for your help !!!

Alex

@Koresh

Hi,

I got all the parts, but I think the NRF24L01 is the normal version and not the + version, there is no + to be found on the chip.

Would the older NRF24L01 ( without plus ) work on the board ?, or do I have to use the R1 resistor ?
( Resistor 1M ( which package size ) - unnecessary element (R1 can be mounted for backward compatibility with nRF24L01, nevermind)

Alex

Nice !!!

I am still waiting for some parts to arrive from china

Alex

@Koresh

I got as reply from dirtypcb's, they changed it to 1.6 mm

Alex

@Koresh

I have both versions ( SMD and THD ) crystals on order with aliexpress now

As for the LDO regulators, I will wait for the PCB's to arrive before making assumptions

Now I have to wait some weeks before everything arrives ........and then my first smd soldering experience !

Alex

@Koresh

Found the smd quartz crystals

Alex

@Koresh

Hi, the bom says 2 x quartz crystal

I did not know they where different and one should be smd.

Could you tell me which quartz crystals I should get ?

Will check out the datasheet for the LDO

Thanks

Alex

@Koresh

Couple of questions

How to mount the second Quartz crystal ?, there are no holes in the pcb

The LDO regulators are mounted next to 4.7uf capacitors, is it correct that the regulators and capacitors are connected to eachother on both sides ?

On the photo of the assembled pcb it looks like this, but on the photo of the plain pcb and the schematic it look different.

                                           | Pin 1
                                          IC3
                             Pin2    |          | Pin 3
        Are pin 2 and 3 also connected to the capacitor left and right pin ?
                          Left pin   |    C14   | Right pin

Thanks !!

Alex

@Koresh

Let's hope the change it

Would it be possible to mount something like this on the pcb ?

http://www.aliexpress.com/item/New-SMA-female-jack-PCB-board-mount-right-angle-RF-coax-adapter-connector-converter/32588385730.html?spm=2114.01010208.3.2.S4UqzO&ws_ab_test=searchweb201556_7,searchweb201644_2_505_506_503_504_10020_502_10001_10002_10017_10010_10005_10011_10006_10003_10021_10004_10022_10009_10008_10018_10019,searchweb201560_3,searchweb1451318400_-1,searchweb1451318411_6449&btsid=91e89a18-89b4-43d2-bbab-ea422e14d360