Hi @MarkV,

I will try to answer your questions as i am also using these meters.

• Pulse counts correspond to the #define PULSE_FACTOR 100
• The value in the upper right corner is the usage of that day (in your case 0.230m3 or 230 liters)
• yes, you could edit the meter in the utility tab of Domoticz to add an offset but i don't use it so not sure.
• Correct! the SEND_FREQUENCY is the interval in milliseconds (so 300000 is 5 minutes). You could lower it. I am currently working on a more instant update for the flow rate. I will test that after i calibrated the sensors and implemented the new library.
• I am not sure, but I think this is something of Domoticz and not MySensors. Maybe there is no gas flow widget and the water widget is reused.

The edit and offset option also works for the kWh meter and Water meter.

Hope it helps.

Hi @MarkV,

I will try to answer your questions as i am also using these meters.

• Pulse counts correspond to the #define PULSE_FACTOR 100
• The value in the upper right corner is the usage of that day (in your case 0.230m3 or 230 liters)
• yes, you could edit the meter in the utility tab of Domoticz to add an offset but i don't use it so not sure.
• Correct! the SEND_FREQUENCY is the interval in milliseconds (so 300000 is 5 minutes). You could lower it. I am currently working on a more instant update for the flow rate. I will test that after i calibrated the sensors and implemented the new library.
• I am not sure, but I think this is something of Domoticz and not MySensors. Maybe there is no gas flow widget and the water widget is reused.

The edit and offset option also works for the kWh meter and Water meter.

Hope it helps.

@AWI the preincrement trick worked! thanx!

@AWI Thanx for the advice! i will try it as soon as i get the chance. Great work!! thanx.

@Cliff-Karlsson Afaik, the numPixels correspond to the total number of leds combined with up/down or left/right. So 16 will make it an 8x8 wall light and 2 would make it a 1 by 1, 72 would make it 36x36. As far as the triggers in Domoticz, i am also new at this. I did manage to get the alarm running and the patterns through the dimmer function, but am unable to set up the patterns on a switch. Domoticz won't let me somehow. Will try to give this more prio.

Keep trying! and posting please

Hi there, I am very happy with this project. Somehow with the transition to the current stable library (2.0) the lights won't turn off completely. I can't figure out what is wrong. Anyone has some suggestions?