hi . Please Help a newbie !
i have a problem with interfacing the NRF24L01+ module with Arduino Leonardo board !
this nrf module works well with arduino UNO . the arduino can receive and send data ! ( MISO 12 , MOSI 11, SCK 13 )
i tried different wiring methods . i tried like the UNO using the 11 12 13 digital pins of the leonardo , and didn't work .
i also use the ICSP headers to connect the MOSI MISO SCK and it didn't work !
CE/CSN to 9/10 , i also tried 8/10 ! nothing happened . the leonardo doesn't receive nothing !

here is the code for the receiver board ( leonardo)

#include <SPI.h>
#include <nRF24L01.h>
#include <RF24.h>
RF24 radio(9, 10);   // nRF24L01 (CE, CSN)
const byte address[6] = "00001";


struct Data_Package {
  
  byte jaxisX;
  byte jaxisY;
  byte jButton;
  byte button1;
  byte button2;
  byte button3;
  byte button4;
  byte button5;
  byte button6;
  
};
Data_Package data; 

void setup() {
  Serial.begin(9600);
  radio.begin();
  radio.openReadingPipe(0, address);
  radio.setAutoAck(false);
  radio.setDataRate(RF24_250KBPS);
  radio.setPALevel(RF24_PA_LOW);
  radio.startListening(); //  Set the module as receiver
 
}
void loop() {
 
  if (radio.available()) {
    radio.read(&data, sizeof(Data_Package));  
 Serial.print("data.jaxisX ");
  Serial.println(data.jaxisX);
  Serial.print("data.jaxisY ");
  Serial.println(data.jaxisY);
  Serial.print("data.jButton ");
  Serial.println(data.jButton);
  Serial.print("data.button1 ");
  Serial.println(data.button1);
  Serial.print("data.button2 ");
  Serial.println(data.button2);
  Serial.print("data.button3 ");
  Serial.println(data.button3);
  Serial.print("data.button4 ");
  Serial.println(data.button4);
  Serial.print("data.button5 ");
  Serial.println(data.button5);
  Serial.print("data.button6 ");
  Serial.println(data.button6);
  Serial.println("*************************");
  //delay(500);// to easly read the data in serial monitor
}
}

and i use the wiring in this pic and the same module