Posts made by bbarriere

Hello Builders,

i am building a arduino 2560 node and i would like to activate radio blinking LED.

I have tested to insert lines regarding Blinking for pins 4,5,6 but there is a issue :

0 MCO:BGN:INIT REPEATER,CP=RNNRA--,VER=2.1.1
3 MCO:BGN:BFR
203 MCO:SLP:MS=5000,SMS=0,I1=255,M1=255,I2=255,M2=255
208 !MCO:SLP:REP
1 MCO:BGN:INIT REPEATER,CP=RNNRA--,VER=2.1.1
5 MCO:BGN:BFR
205 MCO:SLP:MS=5000,SMS=0,I1=255,M1=255,I2=255,M2=255
209 !MCO:SLP:REP
0 MCO:BGN:INIT REPEATER,CP=RNNRA--,VER=2.1.1
4 MCO:BGN:BFR
204 MCO:SLP:MS=5000,SMS=0,I1=255,M1=255,I2=255,M2=255
209 !MCO:SLP:REP
1 MCO:BGN:INIT REPEATER,CP=RNNRA--,VER=2.1.1
5 MCO:BGN:BFR
204 MCO:SLP:MS=5000,SMS=0,I1=255,M1=255,I2=255,M2=255
209 !MCO:SLP:REP
0 MCO:BGN:INIT REPEATER,CP=RNNRA--,VER=2.1.1
4 MCO:BGN:BFR
204 MCO:SLP:MS=5000,SMS=0,I1=255,M1=255,I2=255,M2=255
209 !MCO:SLP:REP
1 MCO:BGN:INIT REPEATER,CP=RNNRA--,VER=2.1.1
5 MCO:BGN:BFR
204 MCO:SLP:MS=5000,SMS=0,I1=255,M1=255,I2=255,M2=255
209 !MCO:SLP:REP
0 MCO:BGN:INIT REPEATER,CP=RNNRA--,VER=2.1.1
4 MCO:BGN:BFR
204 MCO:SLP:MS=5000,SMS=0,I1=255,M1=255,I2=255,M2=255
209 !MCO:SLP:REP

Radio don't want initialized and probably the 2560 pinout don't work for blinking with pins 4,5,6.

Are there a specific pinout for 2560 for radio blinking ?

Hi,

Concerning Sketch for this board ( i have designed a similar board) 2 switchs on/off is discovered for 2 MOC 3041.
Next i am using a virtual variator switch that run a lua script driving the 2 switchs.

Next upgrade, managed the confort -1 and confort -2 orders