Could it have somthing to do with a faulty radio or bad signal?
I get this message aswell when I connect a node that isnt connecties properly.

It is an Arduino Nano directly plugged into the USB port of my Raspberry Pi.
I never had this problem before.

Sorry, it is a serial gateway with a NRF24L01+ radio (with the cap).
It works for a couple of days and then it starts acting up.

It seems to happen when the temp drops on one of the themperature nodes. Could this be something that causes this?

Hi,

So i have this weird issue.
Sometimes my controller just loses connection or something and keeps rebooting.
This will go on for a bit and then it starts working again and i receive my sensor readings again.
How can this happen? And more important, does anybody know how can i fix this?

2017-08-28 19:45:57.742 MySensors: Gateway Ready...
2017-08-28 19:45:57.818 MySensors: Gateway Version: 2.1.1
2017-08-28 19:46:00.043 MySensors: Gateway Ready...
2017-08-28 19:46:00.118 MySensors: Gateway Version: 2.1.1
2017-08-28 19:46:01.824 MySensors: Gateway Ready...
2017-08-28 19:46:01.900 MySensors: Gateway Version: 2.1.1
2017-08-28 19:46:04.142 MySensors: Gateway Ready...
2017-08-28 19:46:04.218 MySensors: Gateway Version: 2.1.1
2017-08-28 19:48:03.044 MySensors: Gateway Ready...
2017-08-28 19:48:03.119 MySensors: Gateway Version: 2.1.1
2017-08-28 19:48:04.837 MySensors: Gateway Ready...
2017-08-28 19:48:04.912 MySensors: Gateway Version: 2.1.1
2017-08-28 19:48:07.133 MySensors: Gateway Ready...
2017-08-28 19:48:07.209 MySensors: Gateway Version: 2.1.1
2017-08-28 19:48:08.926 MySensors: Gateway Ready...
2017-08-28 19:48:09.002 MySensors: Gateway Version: 2.1.1
2017-08-28 19:54:31.786 MySensors: Gateway Ready...
2017-08-28 19:54:31.861 MySensors: Gateway Version: 2.1.1
2017-08-28 19:54:33.546 MySensors: Gateway Ready...
2017-08-28 19:54:33.621 MySensors: Gateway Version: 2.1.1
2017-08-28 19:54:35.871 MySensors: Gateway Ready...
2017-08-28 19:54:35.947 MySensors: Gateway Version: 2.1.1
2017-08-28 19:54:37.646 MySensors: Gateway Ready...
2017-08-28 19:54:37.721 MySensors: Gateway Version: 2.1.1```

yea that was the one.
Ok, so I guess its just crappy...

I have this radio that doesn't work.
The one on the left gives me only error that it can't initialize.
After examining the radio i saw that the big component (no idea what it is) is differently connected then all the other radio's.
Could this be the reason that it doesn't work?

Hi Gohan,

I did not know that page. Thanks for the push :+1:

I think i have crappy radio tho, because i switched it with anotherone i have and it started working....
Thanks!

Hi,

Can someone push me into the right direction.
I followed the "tutorial" and setup a Serial Gateway. This seems to be running just fine.

Now i want to add a node with a temperature sensor.

Both are using the NRF24L radio.

On my node i get an errors in the serial monitor.
What did i do wrong?

0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.1
3 MCO:BGN:BFR
63 TSM:INIT
64 TSF:WUR:MS=0
71 !TSM:INIT:TSP FAIL
72 TSM:FAIL:CNT=1
74 TSM:FAIL:PDT
10077 TSM:FAIL:RE-INIT
10079 TSM:INIT
10085 !TSM:INIT:TSP FAIL
10088 TSM:FAIL:CNT=2
10089 TSM:FAIL:PDT