OK. I left my home during this weekend but I will try monday and then I will communicate you the result

Have a nice weekend.
Denis

Good Morning,

The sketch :

/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Pressure sensor example using BMP085 module  
 * http://www.mysensors.org/build/pressure
 *
 */

// Enable debug prints to serial monitor
#define MY_DEBUG 

// Enable and select radio type attached
#define MY_RADIO_NRF24
//#define MY_RADIO_RFM69

#include <SPI.h>
#include <MySensors.h>  
#include <Wire.h>
#include <Adafruit_BMP085.h>

#define BARO_CHILD 0
#define TEMP_CHILD 1

const float ALTITUDE = 688; // <-- adapt this value to your own location's altitude.

// Sleep time between reads (in seconds). Do not change this value as the forecast algorithm needs a sample every minute.
const unsigned long SLEEP_TIME = 60000; 

const char *weather[] = { "stable", "sunny", "cloudy", "unstable", "thunderstorm", "unknown" };
enum FORECAST
{
  STABLE = 0,     // "Stable Weather Pattern"
  SUNNY = 1,      // "Slowly rising Good Weather", "Clear/Sunny "
  CLOUDY = 2,     // "Slowly falling L-Pressure ", "Cloudy/Rain "
  UNSTABLE = 3,   // "Quickly rising H-Press",     "Not Stable"
  THUNDERSTORM = 4, // "Quickly falling L-Press",    "Thunderstorm"
  UNKNOWN = 5     // "Unknown (More Time needed)
};

Adafruit_BMP085 bmp = Adafruit_BMP085();      // Digital Pressure Sensor 

float lastPressure = -1;
float lastTemp = -1;
int lastForecast = -1;

const int LAST_SAMPLES_COUNT = 5;
float lastPressureSamples[LAST_SAMPLES_COUNT];

// this CONVERSION_FACTOR is used to convert from Pa to kPa in forecast algorithm
// get kPa/h be dividing hPa by 10 
#define CONVERSION_FACTOR (1.0/10.0)

int minuteCount = 0;
bool firstRound = true;
// average value is used in forecast algorithm.
float pressureAvg;
// average after 2 hours is used as reference value for the next iteration.
float pressureAvg2;

float dP_dt;
bool metric;
MyMessage tempMsg(TEMP_CHILD, V_TEMP);
MyMessage pressureMsg(BARO_CHILD, V_PRESSURE);
MyMessage forecastMsg(BARO_CHILD, V_FORECAST);


void setup() 
{
  if (!bmp.begin()) 
  {
    Serial.println("Could not find a valid BMP085 sensor, check wiring!");
    while (1) {}
  }
  metric = getConfig().isMetric;
}

void presentation()  {
  // Send the sketch version information to the gateway and Controller
  sendSketchInfo("Pressure Sensor", "1.1");

  // Register sensors to gw (they will be created as child devices)
  present(BARO_CHILD, S_BARO);
  present(TEMP_CHILD, S_TEMP);
}

void loop() 
{
  float pressure = bmp.readSealevelPressure(ALTITUDE) / 100.0;
  float temperature = bmp.readTemperature();

  if (!metric) 
  {
    // Convert to fahrenheit
    temperature = temperature * 9.0 / 5.0 + 32.0;
  }

  int forecast = sample(pressure);

  Serial.print("Temperature = ");
  Serial.print(temperature);
  Serial.println(metric ? " *C" : " *F");
  Serial.print("Pressure = ");
  Serial.print(pressure);
  Serial.println(" hPa");
  Serial.print("Forecast = ");
  Serial.println(weather[forecast]);


  if (temperature != lastTemp) 
  {
    send(tempMsg.set(temperature, 1));
    lastTemp = temperature;
  }

  if (pressure != lastPressure) 
  {
    send(pressureMsg.set(pressure, 0));
    lastPressure = pressure;
  }

  if (forecast != lastForecast)
  {
    send(forecastMsg.set(weather[forecast]));
    lastForecast = forecast;
  }

  sleep(SLEEP_TIME);
}

float getLastPressureSamplesAverage()
{
  float lastPressureSamplesAverage = 0;
  for (int i = 0; i < LAST_SAMPLES_COUNT; i++)
  {
    lastPressureSamplesAverage += lastPressureSamples[i];
  }
  lastPressureSamplesAverage /= LAST_SAMPLES_COUNT;

  return lastPressureSamplesAverage;
}



// Algorithm found here
// http://www.freescale.com/files/sensors/doc/app_note/AN3914.pdf
// Pressure in hPa -->  forecast done by calculating kPa/h
int sample(float pressure)
{
  // Calculate the average of the last n minutes.
  int index = minuteCount % LAST_SAMPLES_COUNT;
  lastPressureSamples[index] = pressure;

  minuteCount++;
  if (minuteCount > 185)
  {
    minuteCount = 6;
  }

  if (minuteCount == 5)
  {
    pressureAvg = getLastPressureSamplesAverage();
  }
  else if (minuteCount == 35)
  {
    float lastPressureAvg = getLastPressureSamplesAverage();
    float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
    if (firstRound) // first time initial 3 hour
    {
      dP_dt = change * 2; // note this is for t = 0.5hour
    }
    else
    {
      dP_dt = change / 1.5; // divide by 1.5 as this is the difference in time from 0 value.
    }
  }
  else if (minuteCount == 65)
  {
    float lastPressureAvg = getLastPressureSamplesAverage();
    float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
    if (firstRound) //first time initial 3 hour
    {
      dP_dt = change; //note this is for t = 1 hour
    }
    else
    {
      dP_dt = change / 2; //divide by 2 as this is the difference in time from 0 value
    }
  }
  else if (minuteCount == 95)
  {
    float lastPressureAvg = getLastPressureSamplesAverage();
    float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
    if (firstRound) // first time initial 3 hour
    {
      dP_dt = change / 1.5; // note this is for t = 1.5 hour
    }
    else
    {
      dP_dt = change / 2.5; // divide by 2.5 as this is the difference in time from 0 value
    }
  }
  else if (minuteCount == 125)
  {
    float lastPressureAvg = getLastPressureSamplesAverage();
    pressureAvg2 = lastPressureAvg; // store for later use.
    float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
    if (firstRound) // first time initial 3 hour
    {
      dP_dt = change / 2; // note this is for t = 2 hour
    }
    else
    {
      dP_dt = change / 3; // divide by 3 as this is the difference in time from 0 value
    }
  }
  else if (minuteCount == 155)
  {
    float lastPressureAvg = getLastPressureSamplesAverage();
    float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
    if (firstRound) // first time initial 3 hour
    {
      dP_dt = change / 2.5; // note this is for t = 2.5 hour
    }
    else
    {
      dP_dt = change / 3.5; // divide by 3.5 as this is the difference in time from 0 value
    }
  }
  else if (minuteCount == 185)
  {
    float lastPressureAvg = getLastPressureSamplesAverage();
    float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
    if (firstRound) // first time initial 3 hour
    {
      dP_dt = change / 3; // note this is for t = 3 hour
    }
    else
    {
      dP_dt = change / 4; // divide by 4 as this is the difference in time from 0 value
    }
    pressureAvg = pressureAvg2; // Equating the pressure at 0 to the pressure at 2 hour after 3 hours have past.
    firstRound = false; // flag to let you know that this is on the past 3 hour mark. Initialized to 0 outside main loop.
  }

  int forecast = UNKNOWN;
  if (minuteCount < 35 && firstRound) //if time is less than 35 min on the first 3 hour interval.
  {
    forecast = UNKNOWN;
  }
  else if (dP_dt < (-0.25))
  {
    forecast = THUNDERSTORM;
  }
  else if (dP_dt > 0.25)
  {
    forecast = UNSTABLE;
  }
  else if ((dP_dt > (-0.25)) && (dP_dt < (-0.05)))
  {
    forecast = CLOUDY;
  }
  else if ((dP_dt > 0.05) && (dP_dt < 0.25))
  {
    forecast = SUNNY;
  }
  else if ((dP_dt >(-0.05)) && (dP_dt < 0.05))
  {
    forecast = STABLE;
  }
  else
  {
    forecast = UNKNOWN;
  }

  // uncomment when debugging
  //Serial.print(F("Forecast at minute "));
  //Serial.print(minuteCount);
  //Serial.print(F(" dP/dt = "));
  //Serial.print(dP_dt);
  //Serial.print(F("kPa/h --> "));
  //Serial.println(weather[forecast]);

  return forecast;
}

Many thanks for your help.

Best regards.
Denis

Good Morning,

Many thank for your help but this morning I tried your sketch proposed and I have the same problem :

C:\Users\Frédérique\Downloads\PressureSensor\PressureSensorV2.ino\PressureSensorV2.ino.ino: In function 'void loop()':

PressureSensorV2.ino:118: error: 'sample' was not declared in this scope

The complet return of compilation :

Arduino : 1.6.11 (Windows 10), Carte : "Arduino Nano, ATmega328"

C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\Frédérique\Documents\Arduino\libraries -fqbn=arduino:avr:nano:cpu=atmega328 -ide-version=10611 -build-path C:\Users\FRDRIQ~1\AppData\Local\Temp\build273ceb3b965055d440d88958ec10e5e6.tmp -warnings=all -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.avrdude.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -verbose C:\Users\Frédérique\Downloads\PressureSensor\PressureSensorV2.ino\PressureSensorV2.ino.ino
C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\Frédérique\Documents\Arduino\libraries -fqbn=arduino:avr:nano:cpu=atmega328 -ide-version=10611 -build-path C:\Users\FRDRIQ~1\AppData\Local\Temp\build273ceb3b965055d440d88958ec10e5e6.tmp -warnings=all -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.avrdude.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -verbose C:\Users\Frédérique\Downloads\PressureSensor\PressureSensorV2.ino\PressureSensorV2.ino.ino
Using board 'nano' from platform in folder: C:\Program Files (x86)\Arduino\hardware\arduino\avr
Using core 'arduino' from platform in folder: C:\Program Files (x86)\Arduino\hardware\arduino\avr
Detecting libraries used...
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR   "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\eightanaloginputs" "C:\Users\FRDRIQ~1\AppData\Local\Temp\build273ceb3b965055d440d88958ec10e5e6.tmp\sketch\PressureSensorV2.ino.ino.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR   "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\eightanaloginputs" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "C:\Users\FRDRIQ~1\AppData\Local\Temp\build273ceb3b965055d440d88958ec10e5e6.tmp\sketch\PressureSensorV2.ino.ino.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR   "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\eightanaloginputs" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\MySensors-master" "C:\Users\FRDRIQ~1\AppData\Local\Temp\build273ceb3b965055d440d88958ec10e5e6.tmp\sketch\PressureSensorV2.ino.ino.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR   "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\eightanaloginputs" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\MySensors-master" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\Wire\src" "C:\Users\FRDRIQ~1\AppData\Local\Temp\build273ceb3b965055d440d88958ec10e5e6.tmp\sketch\PressureSensorV2.ino.ino.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR   "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\eightanaloginputs" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\MySensors-master" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\Wire\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\Adafruit_BMP085_Library" "C:\Users\FRDRIQ~1\AppData\Local\Temp\build273ceb3b965055d440d88958ec10e5e6.tmp\sketch\PressureSensorV2.ino.ino.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR   "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\eightanaloginputs" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\MySensors-master" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\Wire\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\Adafruit_BMP085_Library" "C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src\SPI.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR   "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\eightanaloginputs" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\Wire\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\Adafruit_BMP085_Library" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\MySensors-master" "C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\Wire\src\Wire.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR   "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\eightanaloginputs" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\MySensors-master" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\Wire\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\Adafruit_BMP085_Library" "C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\Wire\src\utility\twi.c" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR   "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\eightanaloginputs" "-IC:\Users\Frédérique\Documents\Arduino\libraries\MySensors-master" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\Wire\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\Adafruit_BMP085_Library" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "C:\Users\Frédérique\Documents\Arduino\libraries\Adafruit_BMP085_Library\Adafruit_BMP085.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR   "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\eightanaloginputs" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\MySensors-master" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\Wire\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\Adafruit_BMP085_Library" "C:\Users\FRDRIQ~1\AppData\Local\Temp\build273ceb3b965055d440d88958ec10e5e6.tmp\sketch\PressureSensorV2.ino.ino.cpp" -o "nul"
Generating function prototypes...
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR   "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\eightanaloginputs" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\MySensors-master" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\Wire\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\Adafruit_BMP085_Library" "C:\Users\FRDRIQ~1\AppData\Local\Temp\build273ceb3b965055d440d88958ec10e5e6.tmp\sketch\PressureSensorV2.ino.ino.cpp" -o "C:\Users\FRDRIQ~1\AppData\Local\Temp\build273ceb3b965055d440d88958ec10e5e6.tmp\preproc\ctags_target_for_gcc_minus_e.cpp"
"C:\Program Files (x86)\Arduino\tools-builder\ctags\5.8-arduino10/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\Users\FRDRIQ~1\AppData\Local\Temp\build273ceb3b965055d440d88958ec10e5e6.tmp\preproc\ctags_target_for_gcc_minus_e.cpp"
Compilation du croquis...
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR   "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\eightanaloginputs" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\MySensors-master" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\Wire\src" "-IC:\Users\Frédérique\Documents\Arduino\libraries\Adafruit_BMP085_Library" "C:\Users\FRDRIQ~1\AppData\Local\Temp\build273ceb3b965055d440d88958ec10e5e6.tmp\sketch\PressureSensorV2.ino.ino.cpp" -o "C:\Users\FRDRIQ~1\AppData\Local\Temp\build273ceb3b965055d440d88958ec10e5e6.tmp\sketch\PressureSensorV2.ino.ino.cpp.o"
C:\Users\Frédérique\Downloads\PressureSensor\PressureSensorV2.ino\PressureSensorV2.ino.ino: In function 'void loop()':

PressureSensorV2.ino:118: error: 'sample' was not declared in this scope

Utilisation de la bibliothèque SPI version 1.0 dans le dossier: C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI 
Utilisation de la bibliothèque MySensors-master version 2.0.0 dans le dossier: C:\Users\Frédérique\Documents\Arduino\libraries\MySensors-master 
Utilisation de la bibliothèque Wire version 1.0 dans le dossier: C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\Wire 
Utilisation de la bibliothèque Adafruit_BMP085_Library version 1.0.0 dans le dossier: C:\Users\Frédérique\Documents\Arduino\libraries\Adafruit_BMP085_Library 
exit status 1
'sample' was not declared in this scope

Could you help me ?

Best regards.
Denis

Hi,

Since yesteday, I has trying to convert a script for a BMP180 mysensors but I have a error.

The old script in mysensors 1.5 is

/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Pressure sensor example using BMP085 module  
 * http://www.mysensors.org/build/pressure
 *
 */
 
#include <SPI.h>
#include <MySensor.h>  
#include <Wire.h>
#include <Adafruit_BMP085.h>

#define BARO_CHILD 0
#define TEMP_CHILD 1

const float ALTITUDE = 688; // <-- adapt this value to your own location's altitude.

// Sleep time between reads (in seconds). Do not change this value as the forecast algorithm needs a sample every minute.
const unsigned long SLEEP_TIME = 60000; 

const char *weather[] = { "stable", "sunny", "cloudy", "unstable", "thunderstorm", "unknown" };
enum FORECAST
{
	STABLE = 0,			// "Stable Weather Pattern"
	SUNNY = 1,			// "Slowly rising Good Weather", "Clear/Sunny "
	CLOUDY = 2,			// "Slowly falling L-Pressure ", "Cloudy/Rain "
	UNSTABLE = 3,		// "Quickly rising H-Press",     "Not Stable"
	THUNDERSTORM = 4,	// "Quickly falling L-Press",    "Thunderstorm"
	UNKNOWN = 5			// "Unknown (More Time needed)
};

Adafruit_BMP085 bmp = Adafruit_BMP085();      // Digital Pressure Sensor 
MySensor gw;

float lastPressure = -1;
float lastTemp = -1;
int lastForecast = -1;

const int LAST_SAMPLES_COUNT = 5;
float lastPressureSamples[LAST_SAMPLES_COUNT];

// this CONVERSION_FACTOR is used to convert from Pa to kPa in forecast algorithm
// get kPa/h be dividing hPa by 10 
#define CONVERSION_FACTOR (1.0/10.0)

int minuteCount = 0;
bool firstRound = true;
// average value is used in forecast algorithm.
float pressureAvg;
// average after 2 hours is used as reference value for the next iteration.
float pressureAvg2;

float dP_dt;
boolean metric;
MyMessage tempMsg(TEMP_CHILD, V_TEMP);
MyMessage pressureMsg(BARO_CHILD, V_PRESSURE);
MyMessage forecastMsg(BARO_CHILD, V_FORECAST);


void setup() 
{
	gw.begin();

	// Send the sketch version information to the gateway and Controller
	gw.sendSketchInfo("Pressure Sensor", "1.1");

	if (!bmp.begin()) 
	{
		Serial.println("Could not find a valid BMP085 sensor, check wiring!");
		while (1) {}
	}

	// Register sensors to gw (they will be created as child devices)
	gw.present(BARO_CHILD, S_BARO);
	gw.present(TEMP_CHILD, S_TEMP);
	metric = gw.getConfig().isMetric;
}

void loop() 
{
	float pressure = bmp.readSealevelPressure(ALTITUDE) / 100.0;
	float temperature = bmp.readTemperature();

	if (!metric) 
	{
		// Convert to fahrenheit
		temperature = temperature * 9.0 / 5.0 + 32.0;
	}

	int forecast = sample(pressure);

	Serial.print("Temperature = ");
	Serial.print(temperature);
	Serial.println(metric ? " *C" : " *F");
	Serial.print("Pressure = ");
	Serial.print(pressure);
	Serial.println(" hPa");
	Serial.print("Forecast = ");
	Serial.println(weather[forecast]);


	if (temperature != lastTemp) 
	{
		gw.send(tempMsg.set(temperature, 1));
		lastTemp = temperature;
	}

	if (pressure != lastPressure) 
	{
		gw.send(pressureMsg.set(pressure, 0));
		lastPressure = pressure;
	}

	if (forecast != lastForecast)
	{
		gw.send(forecastMsg.set(weather[forecast]));
		lastForecast = forecast;
	}

	gw.sleep(SLEEP_TIME);
}

float getLastPressureSamplesAverage()
{
	float lastPressureSamplesAverage = 0;
	for (int i = 0; i < LAST_SAMPLES_COUNT; i++)
	{
		lastPressureSamplesAverage += lastPressureSamples[i];
	}
	lastPressureSamplesAverage /= LAST_SAMPLES_COUNT;

	return lastPressureSamplesAverage;
}



// Algorithm found here
// http://www.freescale.com/files/sensors/doc/app_note/AN3914.pdf
// Pressure in hPa -->  forecast done by calculating kPa/h
int sample(float pressure)
{
	// Calculate the average of the last n minutes.
	int index = minuteCount % LAST_SAMPLES_COUNT;
	lastPressureSamples[index] = pressure;

	minuteCount++;
	if (minuteCount > 185)
	{
		minuteCount = 6;
	}

	if (minuteCount == 5)
	{
		pressureAvg = getLastPressureSamplesAverage();
	}
	else if (minuteCount == 35)
	{
		float lastPressureAvg = getLastPressureSamplesAverage();
		float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
		if (firstRound) // first time initial 3 hour
		{
			dP_dt = change * 2; // note this is for t = 0.5hour
		}
		else
		{
			dP_dt = change / 1.5; // divide by 1.5 as this is the difference in time from 0 value.
		}
	}
	else if (minuteCount == 65)
	{
		float lastPressureAvg = getLastPressureSamplesAverage();
		float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
		if (firstRound) //first time initial 3 hour
		{
			dP_dt = change; //note this is for t = 1 hour
		}
		else
		{
			dP_dt = change / 2; //divide by 2 as this is the difference in time from 0 value
		}
	}
	else if (minuteCount == 95)
	{
		float lastPressureAvg = getLastPressureSamplesAverage();
		float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
		if (firstRound) // first time initial 3 hour
		{
			dP_dt = change / 1.5; // note this is for t = 1.5 hour
		}
		else
		{
			dP_dt = change / 2.5; // divide by 2.5 as this is the difference in time from 0 value
		}
	}
	else if (minuteCount == 125)
	{
		float lastPressureAvg = getLastPressureSamplesAverage();
		pressureAvg2 = lastPressureAvg; // store for later use.
		float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
		if (firstRound) // first time initial 3 hour
		{
			dP_dt = change / 2; // note this is for t = 2 hour
		}
		else
		{
			dP_dt = change / 3; // divide by 3 as this is the difference in time from 0 value
		}
	}
	else if (minuteCount == 155)
	{
		float lastPressureAvg = getLastPressureSamplesAverage();
		float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
		if (firstRound) // first time initial 3 hour
		{
			dP_dt = change / 2.5; // note this is for t = 2.5 hour
		}
		else
		{
			dP_dt = change / 3.5; // divide by 3.5 as this is the difference in time from 0 value
		}
	}
	else if (minuteCount == 185)
	{
		float lastPressureAvg = getLastPressureSamplesAverage();
		float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
		if (firstRound) // first time initial 3 hour
		{
			dP_dt = change / 3; // note this is for t = 3 hour
		}
		else
		{
			dP_dt = change / 4; // divide by 4 as this is the difference in time from 0 value
		}
		pressureAvg = pressureAvg2; // Equating the pressure at 0 to the pressure at 2 hour after 3 hours have past.
		firstRound = false; // flag to let you know that this is on the past 3 hour mark. Initialized to 0 outside main loop.
	}

	int forecast = UNKNOWN;
	if (minuteCount < 35 && firstRound) //if time is less than 35 min on the first 3 hour interval.
	{
		forecast = UNKNOWN;
	}
	else if (dP_dt < (-0.25))
	{
		forecast = THUNDERSTORM;
	}
	else if (dP_dt > 0.25)
	{
		forecast = UNSTABLE;
	}
	else if ((dP_dt > (-0.25)) && (dP_dt < (-0.05)))
	{
		forecast = CLOUDY;
	}
	else if ((dP_dt > 0.05) && (dP_dt < 0.25))
	{
		forecast = SUNNY;
	}
	else if ((dP_dt >(-0.05)) && (dP_dt < 0.05))
	{
		forecast = STABLE;
	}
	else
	{
		forecast = UNKNOWN;
	}

	// uncomment when debugging
	//Serial.print(F("Forecast at minute "));
	//Serial.print(minuteCount);
	//Serial.print(F(" dP/dt = "));
	//Serial.print(dP_dt);
	//Serial.print(F("kPa/h --> "));
	//Serial.println(weather[forecast]);

	return forecast;
}

and my script proposed in mysensors 2.0

/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik Ekblad
 * 
 * DESCRIPTION
 * Pressure sensor example using BMP085 module  
 * http://www.mysensors.org/build/pressure
 *
 */

#include <MyConfig.h>
#include <SPI.h>
#include <MySensors.h> 
#include <Wire.h>
#include <Adafruit_BMP085.h>

#define BARO_CHILD 0
#define TEMP_CHILD 1

const float ALTITUDE = 688; // <-- adapt this value to your own location's altitude.

// Sleep time between reads (in seconds). Do not change this value as the forecast algorithm needs a sample every minute.
const unsigned long SLEEP_TIME = 60000; 

const char *weather[] = { "stable", "sunny", "cloudy", "unstable", "thunderstorm", "unknown" };
enum FORECAST
{
	STABLE = 0,			// "Stable Weather Pattern"
	SUNNY = 1,			// "Slowly rising Good Weather", "Clear/Sunny "
	CLOUDY = 2,			// "Slowly falling L-Pressure ", "Cloudy/Rain "
	UNSTABLE = 3,		// "Quickly rising H-Press",     "Not Stable"
	THUNDERSTORM = 4,	// "Quickly falling L-Press",    "Thunderstorm"
	UNKNOWN = 5			// "Unknown (More Time needed)
};

Adafruit_BMP085 bmp = Adafruit_BMP085();      // Digital Pressure Sensor 

float lastPressure = -1;
float lastTemp = -1;
int lastForecast = -1;

const int LAST_SAMPLES_COUNT = 5;
float lastPressureSamples[LAST_SAMPLES_COUNT];

// this CONVERSION_FACTOR is used to convert from Pa to kPa in forecast algorithm
// get kPa/h be dividing hPa by 10 
#define CONVERSION_FACTOR (1.0/10.0)

int minuteCount = 0;
bool firstRound = true;
// average value is used in forecast algorithm.
float pressureAvg;
// average after 2 hours is used as reference value for the next iteration.
float pressureAvg2;

float dP_dt;
boolean metric;
MyMessage tempMsg(TEMP_CHILD, V_TEMP);
MyMessage pressureMsg(BARO_CHILD, V_PRESSURE);
MyMessage forecastMsg(BARO_CHILD, V_FORECAST);


void presentation()  
{
//	gw.begin();

	// Send the sketch version information to the gateway and Controller
	sendSketchInfo("Pressure Sensor", "1.1");

	if (!bmp.begin()) 
	{
		Serial.println("Could not find a valid BMP085 sensor, check wiring!");
		while (1) {}
	}

	// Register sensors to gw (they will be created as child devices)
	present(BARO_CHILD, S_BARO);
	present(TEMP_CHILD, S_TEMP);
	metric = getConfig().isMetric;
}

void loop() 
{
	float pressure = bmp.readSealevelPressure(ALTITUDE) / 100.0;
	float temperature = bmp.readTemperature();

	if (!metric) 
	{
		// Convert to fahrenheit
		temperature = temperature * 9.0 / 5.0 + 32.0;
	}

	int forecast = sample(pressure);

	Serial.print("Temperature = ");
	Serial.print(temperature);
	Serial.println(metric ? " *C" : " *F");
	Serial.print("Pressure = ");
	Serial.print(pressure);
	Serial.println(" hPa");
	Serial.print("Forecast = ");
	Serial.println(weather[forecast]);


	if (temperature != lastTemp) 
	{
		send(tempMsg.set(temperature, 1));
		lastTemp = temperature;
	}

	if (pressure != lastPressure) 
	{
		send(pressureMsg.set(pressure, 0));
		lastPressure = pressure;
	}

	if (forecast != lastForecast)
	{
		send(forecastMsg.set(weather[forecast]));
		lastForecast = forecast;
	}

	sleep(SLEEP_TIME);
}

float getLastPressureSamplesAverage()
{
	float lastPressureSamplesAverage = 0;
	for (int i = 0; i < LAST_SAMPLES_COUNT; i++)
	{
		lastPressureSamplesAverage += lastPressureSamples[i];
	}
	lastPressureSamplesAverage /= LAST_SAMPLES_COUNT;

	return lastPressureSamplesAverage;
}



// Algorithm found here
// http://www.freescale.com/files/sensors/doc/app_note/AN3914.pdf
// Pressure in hPa -->  forecast done by calculating kPa/h
int sample(float pressure)
{
	// Calculate the average of the last n minutes.
	int index = minuteCount % LAST_SAMPLES_COUNT;
	lastPressureSamples[index] = pressure;

	minuteCount++;
	if (minuteCount > 185)
	{
		minuteCount = 6;
	}

	if (minuteCount == 5)
	{
		pressureAvg = getLastPressureSamplesAverage();
	}
	else if (minuteCount == 35)
	{
		float lastPressureAvg = getLastPressureSamplesAverage();
		float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
		if (firstRound) // first time initial 3 hour
		{
			dP_dt = change * 2; // note this is for t = 0.5hour
		}
		else
		{
			dP_dt = change / 1.5; // divide by 1.5 as this is the difference in time from 0 value.
		}
	}
	else if (minuteCount == 65)
	{
		float lastPressureAvg = getLastPressureSamplesAverage();
		float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
		if (firstRound) //first time initial 3 hour
		{
			dP_dt = change; //note this is for t = 1 hour
		}
		else
		{
			dP_dt = change / 2; //divide by 2 as this is the difference in time from 0 value
		}
	}
	else if (minuteCount == 95)
	{
		float lastPressureAvg = getLastPressureSamplesAverage();
		float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
		if (firstRound) // first time initial 3 hour
		{
			dP_dt = change / 1.5; // note this is for t = 1.5 hour
		}
		else
		{
			dP_dt = change / 2.5; // divide by 2.5 as this is the difference in time from 0 value
		}
	}
	else if (minuteCount == 125)
	{
		float lastPressureAvg = getLastPressureSamplesAverage();
		pressureAvg2 = lastPressureAvg; // store for later use.
		float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
		if (firstRound) // first time initial 3 hour
		{
			dP_dt = change / 2; // note this is for t = 2 hour
		}
		else
		{
			dP_dt = change / 3; // divide by 3 as this is the difference in time from 0 value
		}
	}
	else if (minuteCount == 155)
	{
		float lastPressureAvg = getLastPressureSamplesAverage();
		float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
		if (firstRound) // first time initial 3 hour
		{
			dP_dt = change / 2.5; // note this is for t = 2.5 hour
		}
		else
		{
			dP_dt = change / 3.5; // divide by 3.5 as this is the difference in time from 0 value
		}
	}
	else if (minuteCount == 185)
	{
		float lastPressureAvg = getLastPressureSamplesAverage();
		float change = (lastPressureAvg - pressureAvg) * CONVERSION_FACTOR;
		if (firstRound) // first time initial 3 hour
		{
			dP_dt = change / 3; // note this is for t = 3 hour
		}
		else
		{
			dP_dt = change / 4; // divide by 4 as this is the difference in time from 0 value
		}
		pressureAvg = pressureAvg2; // Equating the pressure at 0 to the pressure at 2 hour after 3 hours have past.
		firstRound = false; // flag to let you know that this is on the past 3 hour mark. Initialized to 0 outside main loop.
	}

	int forecast = UNKNOWN;
	if (minuteCount < 35 && firstRound) //if time is less than 35 min on the first 3 hour interval.
	{
		forecast = UNKNOWN;
	}
	else if (dP_dt < (-0.25))
	{
		forecast = THUNDERSTORM;
	}
	else if (dP_dt > 0.25)
	{
		forecast = UNSTABLE;
	}
	else if ((dP_dt > (-0.25)) && (dP_dt < (-0.05)))
	{
		forecast = CLOUDY;
	}
	else if ((dP_dt > 0.05) && (dP_dt < 0.25))
	{
		forecast = SUNNY;
	}
	else if ((dP_dt >(-0.05)) && (dP_dt < 0.05))
	{
		forecast = STABLE;
	}
	else
	{
		forecast = UNKNOWN;
	}

	// uncomment when debugging
	//Serial.print(F("Forecast at minute "));
	//Serial.print(minuteCount);
	//Serial.print(F(" dP/dt = "));
	//Serial.print(dP_dt);
	//Serial.print(F("kPa/h --> "));
	//Serial.println(weather[forecast]);

	return forecast;
}

When I tried to compile, Arduino said :

Arduino : 1.6.11 (Windows 10), Carte : "Arduino Nano, ATmega328"


C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino: In function 'void loop()':

PressureSensorVDM2:112: error: 'sample' was not declared in this scope

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorvDM.ino: At global scope:

PressureSensorvDM:46: error: redefinition of 'const float ALTITUDE'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:39:13: note: 'const float ALTITUDE' previously defined here

PressureSensorvDM:49: error: redefinition of 'const long unsigned int SLEEP_TIME'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:42:21: note: 'const long unsigned int SLEEP_TIME' previously defined here

PressureSensorvDM:51: error: redefinition of 'const char* weather []'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:44:13: note: 'const char* weather [6]' previously defined here

PressureSensorvDM:52: error: multiple definition of 'enum FORECAST'

PressureSensorVDM2:45: error: previous definition here

PressureSensorvDM:62: error: redefinition of 'Adafruit_BMP085 bmp'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:55:17: note: 'Adafruit_BMP085 bmp' previously declared here

PressureSensorvDM:65: error: redefinition of 'float lastPressure'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:57:7: note: 'float lastPressure' previously defined here

PressureSensorvDM:66: error: redefinition of 'float lastTemp'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:58:7: note: 'float lastTemp' previously defined here

PressureSensorvDM:67: error: redefinition of 'int lastForecast'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:59:5: note: 'int lastForecast' previously defined here

PressureSensorvDM:69: error: redefinition of 'const int LAST_SAMPLES_COUNT'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:61:11: note: 'const int LAST_SAMPLES_COUNT' previously defined here

PressureSensorvDM:70: error: redefinition of 'float lastPressureSamples [5]'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:62:7: note: 'float lastPressureSamples [5]' previously declared here

PressureSensorvDM:77: error: redefinition of 'int minuteCount'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:68:5: note: 'int minuteCount' previously defined here

PressureSensorvDM:78: error: redefinition of 'bool firstRound'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:69:6: note: 'bool firstRound' previously defined here

PressureSensorvDM:80: error: redefinition of 'float pressureAvg'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:71:7: note: 'float pressureAvg' previously declared here

PressureSensorvDM:82: error: redefinition of 'float pressureAvg2'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:73:7: note: 'float pressureAvg2' previously declared here

PressureSensorvDM:84: error: redefinition of 'float dP_dt'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:75:7: note: 'float dP_dt' previously declared here

PressureSensorvDM:85: error: redefinition of 'boolean metric'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:76:9: note: 'boolean metric' previously declared here

PressureSensorvDM:86: error: redefinition of 'MyMessage tempMsg'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:77:11: note: 'MyMessage tempMsg' previously declared here

PressureSensorvDM:87: error: redefinition of 'MyMessage pressureMsg'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:78:11: note: 'MyMessage pressureMsg' previously declared here

PressureSensorvDM:88: error: redefinition of 'MyMessage forecastMsg'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:79:11: note: 'MyMessage forecastMsg' previously declared here

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorvDM.ino: In function 'void presentation()':

PressureSensorvDM:91: error: redefinition of 'void presentation()'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:82:6: note: 'void presentation()' previously defined here

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorvDM.ino: In function 'void loop()':

PressureSensorvDM:109: error: redefinition of 'void loop()'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:101:6: note: 'void loop()' previously defined here

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorvDM.ino: In function 'float getLastPressureSamplesAverage()':

PressureSensorvDM:154: error: redefinition of 'float getLastPressureSamplesAverage()'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:145:7: note: 'float getLastPressureSamplesAverage()' previously defined here

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorvDM.ino: In function 'int sample(float)':

PressureSensorvDM:171: error: redefinition of 'int sample(float)'

C:\Users\Frédérique\Downloads\PressureSensorVDM2\PressureSensorVDM2.ino:162:5: note: 'int sample(float)' previously defined here

Utilisation de la bibliothèque MySensors-master version 2.0.0 dans le dossier: C:\Users\Frédérique\Documents\Arduino\libraries\MySensors-master 
Utilisation de la bibliothèque SPI version 1.0 dans le dossier: C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI 
Utilisation de la bibliothèque Wire version 1.0 dans le dossier: C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\Wire 
Utilisation de la bibliothèque Adafruit_BMP085_Library version 1.0.0 dans le dossier: C:\Users\Frédérique\Documents\Arduino\libraries\Adafruit_BMP085_Library 
exit status 1
'sample' was not declared in this scope

Could you help me ?

Many thanks for your help.

Best regards.
Denis