@Dwalt said:

@frantona Could you post your entire sketch? Did you measure the signal timing?

Hi! Thanks for your answer. Nope, I didnt measured the signal timing. I missed it. How should I do it?

I will paste the full code this night when I arrive home, Im using the same one Pete posted few messages back.

Thanks a lot!

Hi to everyone! Im very (I mean VERY) new at this, and Im far to be a programer or an specialist, Im just an enthusiastic end user willing to do all of you experts do!

I have the same problem as Pete had, I have some dooya motors in my blinds and I want to integrate them to my smarthome system. This blinds are controlled by a remote control with 3 buttons, up – down – stop, and they are suppose to be RF, they have awesome range btw (see pics).

First I tried the RC-Switch to sniff the RF code, but the program return nothing, just blank, that’s why I came to this, wich I would like to thank Pete for giving a light at the end of the tunel! (which Im still in).

I did all the process to sniff the signal of the remotes, and this is what I got and traduced to binary:

Not the same wave structure (squared) but I hope it has nothing to do.

Now Im in the process of testing this code just with the Arduino, but it doesn’t work! I followed the code Pete uploaded and change the highlighted parts with my code, please let me know if I did ok, this are what I changed:

This first part, I used the first 28 bits of my signal, which is the same in the 3 comands:

Here, I used the last 8 bits for each comand:

Any clues what I might be doing wrong?

Just in case, Im using an Arduino UNO, and I connected it this way:

Thanks in advance!

Hi! I would be much interested! But unfortunately I know very little about programing, I am more a user... I would love to replicate this on my smartthings system:

http://forum.mysensors.org/topic/7/controlling-blinds-com-rf-dooya-motors-with-arduino-and-vera

Any suggestions?

Thanks!