Ive designed a NRF based mysensor remote with 14 keys, I want to use pin 2 for one of the key. Currently all pin work properly for key but pin 2 does not recognise instead it creates some disturbance in transmission. what i receive on destination node is unexpected. Is it possible to disable use of pin 2 . it looks like mysenso uses pin 2 for some internal use.

I just want to bypass inbuilt wifi connection method in GatewayESP8266 and use my own code of SmartConfig to create WiFi connection. I'm not able to achieve this. is there any way to do this?
Ive tried changing library (MyGatewayTransportEthernet) code, but it throws TSM exception. I've tested SmartConfig separately and it works fine with my Android App.

Is there any chance of making this tool Open source. Its great tool.
Making it open could lead to its porting to various platforms like android and ios
and other desktop OS and also make it more stable.
just a suggestion.!

@tekka ok.. hope so!

Myscontroller latest version 1.0.0.3316 shows trojan at virustotal
is this ok?
https://www.virustotal.com/#/file/6082b86e6a56783e692afaa7c6d79e5af0d6ca58476ef7e180a39594ce441cd7/detection
Whats the reason for it

Hey @mfalkvidd thanks for reply
Actually the problem just got resolved. Its was due to different version of tutorial existing here, which uses pin 7,8 or 9, 10 without mentioning it. I just tried with 9,10 and it started working. (CE, CSN)

Everything is very straight forward and working fine now.
I'll check everything with latest development release, and get back here,

Thanks again.

I'm using simple setup with Arduino Nano+NRF24l01+
Env - Arduino 1.6.13, Arduino Nano
I'm continuously getting following error on serial monitor.

0;255;3;0;9;Starting gateway (RNNGA-, 2.0.0)
0;255;3;0;9;TSM:INIT
0;255;3;0;9;!TSM:RADIO:FAIL
0;255;3;0;9;!TSM:FAILURE
0;255;3;0;9;TSM:PDT
0;255;3;0;9;TSM:INIT
0;255;3;0;9;!TSM:RADIO:FAIL
0;255;3;0;9;!TSM:FAILURE
0;255;3;0;9;TSM:PDT
0;255;3;0;9;TSM:INIT
0;255;3;0;9;!TSM:RADIO:FAIL
0;255;3;0;9;!TSM:FAILURE