Hi @all
I modified the MySensorsCore.cpp as tekka did on Github.
Now my sendHeartbeat() is received by FHEM and it is working fine!
Thanks a lot to all!
@rejoe2
I just tested to send with MYSController 0;0;3;0;18; and the Gateway was answering like before.
@tekka WOW, thanks a lot! That was fast. How can I modify the library on my local machine to have the functionality?
@rejoe2 I also send a heartbeat-request with MYSController to the GW and the GW was responding.
I send via MYSController 0;255;3;0;18; and received 0;255;3;0;14; and all the other presentation messages.
It seems, that the function sendHeartbeat() is deactivated like tekka said.
Hello again,
thank you.
I am talking about the tcp/ip output.
Checked with MYSController connected via IP address.
I also tried the Arduino Serial Monitor. But I don’t know how to geht the raw data, which have been send (for example heartbeat output).
Maybe, because no heartbeat is sent?
Thanks for your help!
Regards
Hello,
this is my first post.
I have an Arduino Nano clone with an ethernet module working as stand-alone gateway. No node is connected. Everything works fine except the sendHeartbeat(); function.
I want to send every 5 minutes a heartbeat to the controller. In my case FHEM. But analysing with MYSController, no heartbeat is sent. Everything before and after ‘sendHeartbeat();’ is sent, but no heartbeat.
Is this a bug? Or should only the nodes send a heartbeat directly to the controller?
Thank you!
Regards