Posts made by ThomasDecock

ThomasDecock

Did you manage to get this working?
if yes, can you share your script?
I am also having trouble with the dallas temp sensor, if your code works i think it can help me a lot!
(i am trying to make a 'motion - temperature - 3 pwm dimmer' sensor

ThomasDecock

@blacey said:

@ThomasDecock Glad to hear you got it working! By the way, Domoticoz is up to V2.2657 so you may want to look into updating your version. Let me know if you need help with anything else.

Cheers,
Bruce

Thanks! I thought i was using the beta, but after checking i saw that the 'use beta' option wasn't selected anymore...
so I just updated and tried once again with the 'DimmableLED' sketch (after deleting the dimmer in my domoticz) and now it does appear in my domoticz device list!!

now i will attempt to make it from 1 dimmer to 3 dimmers..

Thanks for the help!

ThomasDecock

@blacey said:

@ThomasDecock said:

yes, i did.

when i hook up a temp sensor and load the temp sketch it appears in my device list
and it also appears when using the GizMoCuz (DimmableLight) sketch

Try moving the gw.sendSketchInfo() before the gw.present() in setup(). Not sure why they are in that order but perhaps the Domoticoz plugin has some order dependence before it assumes a device is valid. If that doesn't work, I will take a look at the Domoticoz plugin to see if I can figure out what is going on...

Are you using a serial or ethernet gateway?

I did what you suggested and moved the gw.sendSketchInfo() before the gw.present()
but nothing changed.

I am using domoticz version 2.2563 on RPI B+ and a serial gateway. I did take a look in that topic on the domoticz forum and left a reply.

its really strange that when i use the 'Dimable Light' sketch the dimmer does appear in domoticz but not with the DimmableLED sketch.

EDIT:
extra info
if i first use the ''Dimable Light" sketch so that the dimmer appears in the device list from domoticz and then upload the "DimmableLED" to the node, am i able to control the leds (on pin 3) with the dimmer that was created with the 'dimable light' sketch .

Kind regards!
Thomas

ThomasDecock

yes, i did.

when i hook up a temp sensor and load the temp sketch it appears in my device list
and it also appears when using the GizMoCuz (DimmableLight) sketch

ThomasDecock

the way i should add the dimmer to domoticz is with the 'device' page, then i should be able to select the dimmer and add it to my domoticz configuration..

but the problem with this sketch is that it doesn't appear in domoticz,
when i use the sketch from GizMoCuz (DimmableLight)

see here:

/***
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 * 
 * DESCRIPTION
 * This sketch provides an example how to implement a Dimmable Light 
 * It is pure virtual and it logs messages to the serial output
 * It can be used as a base sketch for actual hardware.
 * Stores the last light state and level in eeprom.
 * 
 * Developed by GizMoCuz (Domoticz)
 *
 * REVISION HISTORY
 * Version 1.0 - January 30, 2015
 *
 ***/
 
#include <SPI.h>
#include <MySensor.h>  

#define CHILD_ID_LIGHT 1

#define EPROM_LIGHT_STATE 1
#define EPROM_DIMMER_LEVEL 2

#define LIGHT_OFF 0
#define LIGHT_ON 1

#define SN "Dimable Light"
#define SV "1.0"

int LastLightState=LIGHT_OFF;
int LastDimValue=100;

MySensor gw;
MyMessage lightMsg(CHILD_ID_LIGHT, V_LIGHT);
MyMessage dimmerMsg(CHILD_ID_LIGHT, V_DIMMER);

void setup()  
{ 
  gw.begin(incomingMessage, AUTO, false);

  // Send the Sketch Version Information to the Gateway
  gw.sendSketchInfo(SN, SV);

  gw.present(CHILD_ID_LIGHT, S_DIMMER );

  //Retreive our last light state from the eprom
  int LightState=gw.loadState(EPROM_LIGHT_STATE); 
  if (LightState<=1) {
    LastLightState=LightState;
    int DimValue=gw.loadState(EPROM_DIMMER_LEVEL); 
    if ((DimValue>0)&&(DimValue<=100)) {
      //There should be no Dim value of 0, this would mean LIGHT_OFF
      LastDimValue=DimValue;
    }
  }

  //Here you actualy switch on/off the light with the last known dim level
  SetCurrentState2Hardware();
  
  Serial.println( "Node ready to receive messages..." );  
}

void loop()      
{
  //delay(1000);  // Removed by hek 
  // Process incoming messages (like config and light state from controller)
  gw.process();
}

void incomingMessage(const MyMessage &message)
{
  if (message.type == V_LIGHT) {
    Serial.println( "V_LIGHT command received..." );
    
    int lstate= atoi( message.data );
    if ((lstate<0)||(lstate>1)) {
      Serial.println( "V_LIGHT data invalid (should be 0/1)" );
      return;
    }
    LastLightState=lstate;
    gw.saveState(EPROM_LIGHT_STATE, LastLightState);
    
    if ((LastLightState==LIGHT_ON)&&(LastDimValue==0)) {
       //In the case that the Light State = On, but the dimmer value is zero,
       //then something (probably the controller) did something wrong,
       //for the Dim value to 100%
      LastDimValue=100;
      gw.saveState(EPROM_DIMMER_LEVEL, LastDimValue);
    }
    
    //When receiving a V_LIGHT command we switch the light between OFF and the last received dimmer value
    //This means if you previously set the lights dimmer value to 50%, and turn the light ON
    //it will do so at 50%
  }
  else if (message.type == V_DIMMER) {
    Serial.println( "V_DIMMER command received..." );  
    int dimvalue= atoi( message.data );
    if ((dimvalue<0)||(dimvalue>100)) {
      Serial.println( "V_DIMMER data invalid (should be 0..100)" );
      return;
    }
    if (dimvalue==0) {
      LastLightState=LIGHT_OFF;
    }
    else {
      LastLightState=LIGHT_ON;
      LastDimValue=dimvalue;
      gw.saveState(EPROM_DIMMER_LEVEL, LastDimValue);
    }
  }
  else {
    Serial.println( "Invalid command received..." );  
    return;
  }

  //Here you set the actual light state/level
  SetCurrentState2Hardware();
}

void SetCurrentState2Hardware()
{
  if (LastLightState==LIGHT_OFF) {
     Serial.println( "Light state: OFF" );
  }
  else {
     Serial.print( "Light state: ON, Level: " );
     Serial.println( LastDimValue );
  }

  //Send current state to the controller
  SendCurrentState2Controller();
}

void SendCurrentState2Controller()
{
  if ((LastLightState==LIGHT_OFF)||(LastDimValue==0)) {
    gw.send(dimmerMsg.set(0));
  }
  else {
    gw.send(dimmerMsg.set(LastDimValue));
  }
}

with this sketc their does appear an dimmer in the 'device' page from domoticz
(but this is a virtual sketch with no hardware connected to)

i can add the hardware code from the DimmableLED sketch an inplement it in the sketch from GizMoCuz (DimmableLight).. but I am new at all this, its still kinda hard understanding all the code...
I also want to add 2 more dimmers to this node (so 3 dimmers in total) but i'am also still figuring out how to do that

Thanks,
Thomas

ThomasDecock

Thanks for the fast reply!

I use an arduino nano,
and i see i selected the wrong baud,

now i get this on the serial monitor:

sensor started, id 1
send: 1-1-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
send: 1-1-0-0 s=255,c=3,t=6,pt=1,l=1,st=fail:0
send: 1-1-0-0 s=0,c=0,t=4,pt=0,l=0,st=ok:
send: 1-1-0-0 s=255,c=3,t=11,pt=0,l=11,st=ok:DimmableLED
send: 1-1-0-0 s=255,c=3,t=12,pt=0,l=3,st=ok:1.1
send: 1-1-0-0 s=0,c=2,t=3,pt=0,l=0,st=ok:

in the domoticz log i get this:

2015-07-13 16:13:15.077 MySensors: Node: 1, Sketch Name: DimmableLED
2015-07-13 16:13:15.083 MySensors: Node: 1, Sketch Version: 1.1

but the dimmer doesn't appear in the 'device' list from domoticz

ThomasDecock

I used this sketch:

/***
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 * 
 * DESCRIPTION
 * This sketch provides a Dimmable LED Light using PWM and based Henrik Ekblad 
 * <henrik.ekblad@gmail.com> Vera Arduino Sensor project.  
 * Developed by Bruce Lacey, inspired by Hek's MySensor's example sketches.
 * 
 * The circuit uses a MOSFET for Pulse-Wave-Modulation to dim the attached LED or LED strip.  
 * The MOSFET Gate pin is connected to Arduino pin 3 (LED_PIN), the MOSFET Drain pin is connected
 * to the LED negative terminal and the MOSFET Source pin is connected to ground.  
 *
 * This sketch is extensible to support more than one MOSFET/PWM dimmer per circuit.
 *
 * REVISION HISTORY
 * Version 1.0 - February 15, 2014 - Bruce Lacey
 * Version 1.1 - August 13, 2014 - Converted to 1.4 (hek) 
 *
 ***/
#define SN "DimmableLED"
#define SV "1.1"

#include <MySensor.h> 
#include <SPI.h>

#define LED_PIN 3      // Arduino pin attached to MOSFET Gate pin
#define FADE_DELAY 10  // Delay in ms for each percentage fade up/down (10ms = 1s full-range dim)

MySensor gw;

static int currentLevel = 0;  // Current dim level...
MyMessage dimmerMsg(0, V_DIMMER);
MyMessage lightMsg(0, V_LIGHT);

/***
 * Dimmable LED initialization method
 */
void setup()  
{ 
  Serial.println( SN ); 
  gw.begin( incomingMessage );
  
  // Register the LED Dimmable Light with the gateway
  gw.present( 0, S_DIMMER );
  
  gw.sendSketchInfo(SN, SV);
  // Pull the gateway's current dim level - restore light level upon sendor node power-up
  gw.request( 0, V_DIMMER );
}

/***
 *  Dimmable LED main processing loop 
 */
void loop() 
{
  gw.process();
}



void incomingMessage(const MyMessage &message) {
  if (message.type == V_LIGHT || message.type == V_DIMMER) {
    
    //  Retrieve the power or dim level from the incoming request message
    int requestedLevel = atoi( message.data );
    
    // Adjust incoming level if this is a V_LIGHT variable update [0 == off, 1 == on]
    requestedLevel *= ( message.type == V_LIGHT ? 100 : 1 );
    
    // Clip incoming level to valid range of 0 to 100
    requestedLevel = requestedLevel > 100 ? 100 : requestedLevel;
    requestedLevel = requestedLevel < 0   ? 0   : requestedLevel;
    
    Serial.print( "Changing level to " );
    Serial.print( requestedLevel );
    Serial.print( ", from " ); 
    Serial.println( currentLevel );

    fadeToLevel( requestedLevel );
    
    // Inform the gateway of the current DimmableLED's SwitchPower1 and LoadLevelStatus value...
    gw.send(lightMsg.set(currentLevel > 0 ? 1 : 0));

    // hek comment: Is this really nessesary?
    gw.send( dimmerMsg.set(currentLevel) );

    
    }
}

/***
 *  This method provides a graceful fade up/down effect
 */
void fadeToLevel( int toLevel ) {

  int delta = ( toLevel - currentLevel ) < 0 ? -1 : 1;
  
  while ( currentLevel != toLevel ) {
    currentLevel += delta;
    analogWrite( LED_PIN, (int)(currentLevel / 100. * 255) );
    delay( FADE_DELAY );
  }
}

when i open the serial monitor (from the node) i see this: 5àèàÒààð

i did try with an other script based on that from: GizMoCuz (DimmableLight) (just added one line to control the led's) this is working, but its without the fading and kinda complex :s

/***
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 * 
 * DESCRIPTION
 * This sketch provides an example how to implement a Dimmable Light 
 * It is pure virtual and it logs messages to the serial output
 * It can be used as a base sketch for actual hardware.
 * Stores the last light state and level in eeprom.
 * 
 * Developed by GizMoCuz (Domoticz)
 *
 * REVISION HISTORY
 * Version 1.0 - January 30, 2015
 *
 ***/
 
#include <SPI.h>
#include <MySensor.h>  

#define CHILD_ID_LIGHT 1
#define LED_PIN 3 

#define EPROM_LIGHT_STATE 1
#define EPROM_DIMMER_LEVEL 2

#define LIGHT_OFF 0
#define LIGHT_ON 1

#define SN "Dimable Light"
#define SV "1.0"

int LastLightState=LIGHT_OFF;
int LastDimValue=100;

MySensor gw;
MyMessage lightMsg(CHILD_ID_LIGHT, V_LIGHT);
MyMessage dimmerMsg(CHILD_ID_LIGHT, V_DIMMER);

void setup()  
{ 
  gw.begin(incomingMessage, AUTO, false);

  // Send the Sketch Version Information to the Gateway
  gw.sendSketchInfo(SN, SV);

  gw.present(CHILD_ID_LIGHT, S_DIMMER );

  //Retreive our last light state from the eprom
  int LightState=gw.loadState(EPROM_LIGHT_STATE); 
  if (LightState<=1) {
    LastLightState=LightState;
    int DimValue=gw.loadState(EPROM_DIMMER_LEVEL); 
    if ((DimValue>0)&&(DimValue<=100)) {
      //There should be no Dim value of 0, this would mean LIGHT_OFF
      LastDimValue=DimValue;
    }
  }

  //Here you actualy switch on/off the light with the last known dim level
  SetCurrentState2Hardware();
  
  Serial.println( "Node ready to receive messages..." );  
}

void loop()      
{
  //delay(1000);  // Removed by hek 
  // Process incoming messages (like config and light state from controller)
  gw.process();
}

void incomingMessage(const MyMessage &message)
{
  if (message.type == V_LIGHT) {
    Serial.println( "V_LIGHT command received..." );
    
    int lstate= atoi( message.data );
    if ((lstate<0)||(lstate>1)) {
      Serial.println( "V_LIGHT data invalid (should be 0/1)" );
      return;
    }
    LastLightState=lstate;
    gw.saveState(EPROM_LIGHT_STATE, LastLightState);
    
    if ((LastLightState==LIGHT_ON)&&(LastDimValue==0)) {
       //In the case that the Light State = On, but the dimmer value is zero,
       //then something (probably the controller) did something wrong,
       //for the Dim value to 100%
      LastDimValue=100;
      gw.saveState(EPROM_DIMMER_LEVEL, LastDimValue);
    }
    
    //When receiving a V_LIGHT command we switch the light between OFF and the last received dimmer value
    //This means if you previously set the lights dimmer value to 50%, and turn the light ON
    //it will do so at 50%
  }
  else if (message.type == V_DIMMER) {
    Serial.println( "V_DIMMER command received..." );  
    int dimvalue= atoi( message.data );
    if ((dimvalue<0)||(dimvalue>100)) {
      Serial.println( "V_DIMMER data invalid (should be 0..100)" );
      return;
    }
    if (dimvalue==0) {
      LastLightState=LIGHT_OFF;
    }
    else {
      LastLightState=LIGHT_ON;
      LastDimValue=dimvalue;
      gw.saveState(EPROM_DIMMER_LEVEL, LastDimValue);
    }
  }
  else {
    Serial.println( "Invalid command received..." );  
    return;
  }

  //Here you set the actual light state/level
  SetCurrentState2Hardware();
}

void SetCurrentState2Hardware()
{
  if (LastLightState==LIGHT_OFF) {
     Serial.println( "Light state: OFF" );
  }
  else {
     Serial.print( "Light state: ON, Level: " );
     Serial.println( LastDimValue );
  }

analogWrite( LED_PIN, (int)(LastDimValue / 100. * 255) );
  //Send current state to the controller
  SendCurrentState2Controller();
}

void SendCurrentState2Controller()
{
  if ((LastLightState==LIGHT_OFF)||(LastDimValue==0)) {
    gw.send(dimmerMsg.set(0));
  }
  else {
    gw.send(dimmerMsg.set(LastDimValue));
  }
}

ThomasDecock

Hi!

I just added a led dimmer to my setup
i used this to build it:
http://www.mysensors.org/build/dimmer

the problem is that it doesn't appear in my list 'devices' in domoticz
in the domoticz log i see this:

2015-07-13 12:53:36.517 MySensors: Node: 1, Sketch Name: DimmableLED
2015-07-13 12:53:36.523 MySensors: Node: 1, Sketch Version: 1.1

someone who can help me with this?