mysensors on rpi with NRF2401 with Domoticz
-
thanks for your response.
I tried all possible combinations but one ( the one that works)
I started with "https://www.mysensors.org/build/raspberry"
git clone https://github.com/mysensors/MySensors.git --branch master. Expected response "fatal: destination path 'MySensors' already exists and is not an empty directory"
cd MySensors
/MySensors $ ./configure --my-transport=rf24
[SECTION] Detecting target machine.
[OK] machine detected: SoC=BCM2837, Type=rpi3, CPU=armv7l.
[SECTION] Detecting SPI driver.
[OK] SPI driver detected:BCM.
[SECTION] Gateway configuration.
[OK] Type: ethernet.
[OK] Transport: rf24.
[OK] Signing: Disabled.
[OK] Encryption: Disabled.
[OK] CPPFLAGS: -march=armv8-a+crc -mtune=cortex-a53 -mfpu=neon-fp-armv8 -mfloat-abi=hard -DMY_RADIO_RF24 -DMY_GATEWAY_LINUX -DMY_DEBUG -DLINUX_SPI_BCM -DLINUX_ARCH_RASPBERRYPI
[OK] CXXFLAGS: -std=c++11
[SECTION] Detecting init system.
[OK] Init system detected: systemd.
[SECTION] Saving configuration.
[OK] Saved.
[SECTION] Cleaning previous builds.
[OK] Finished./MySensors $ make .
return : gcc -MT build/hal/architecture/Linux/drivers/core/config.o -MMD -MP -march=armv8-a+crc -mtune=cortex-a53 -mfpu=neon-fp-armv8 -mfloat-abi=hard -DMY_RADIO_RF24 -DMY_GATEWAY_LINUX -DMY_DEBUG -DLINUX_SPI_BCM -DLINUX_ARCH_RASPBERRYPI -Ofast -g -Wall -Wextra -I. -I./core -I./hal/architecture/Linux/drivers/core -I./hal/architecture/Linux/drivers/BCM -c hal/architecture/Linux/drivers/core/config.c -o build/hal/architecture/Linux/drivers/core/config.o
gcc -MT build/hal/architecture/Linux/drivers/core/log.o -MMD -MP -march=armv8-a+crc -mtune=cortex-a53 -mfpu=neon-fp-armv8 -mfloat-abi=hard -DMY_RADIO_RF24 -DMY_GATEWAY_LINUX -DMY_DEBUG -DLINUX_SPI_BCM -DLINUX_ARCH_RASPBERRYPI -Ofast -g -Wall -Wextra -I. -I./core -I./hal/architecture/Linux/drivers/core -I./hal/architecture/Linux/drivers/BCM -c hal/architecture/Linux/drivers/core/log.c -o build/hal/architecture/Linux/drivers/core/log.o
g++ -MT build/hal/architecture/Linux/drivers/core/compatibility.o -MMD -MP -march=armv8-a+crc -mtune=cortex-a53 -mfpu=neon-fp-armv8 -mfloat-abi=hard -DMY_RADIO_RF24 -DMY_GATEWAY_LINUX -DMY_DEBUG -DLINUX_SPI_BCM -DLINUX_ARCH_RASPBERRYPI -Ofast -g -Wall -Wextra -std=c++11 -I. -I./core -I./hal/architecture/Linux/drivers/core -I./hal/architecture/Linux/drivers/BCM -c hal/architecture/Linux/drivers/core/compatibility.cpp -o build/hal/architecture/Linux/drivers/core/compatibility.o
g++ -MT build/hal/architecture/Linux/drivers/core/EthernetClient.o -MMD -MP -march=armv8-a+crc -mtune=cortex-a53 -mfpu=neon-fp-armv8 -mfloat-abi=hard -DMY_RADIO_RF24 -DMY_GATEWAY_LINUX -DMY_DEBUG -DLINUX_SPI_BCM -DLINUX_ARCH_RASPBERRYPI -Ofast -g -Wall -Wextra -std=c++11 -I. -I./core -I./hal/architecture/Linux/drivers/core -I./hal/architecture/Linux/drivers/BCM -c hal/architecture/Linux/drivers/core/EthernetClient.cpp -o build/hal/architecture/Linux/drivers/core/EthernetClient.o
g++ -MT build/hal/architecture/Linux/drivers/core/EthernetServer.o -MMD -MP -march=armv8-a+crc -mtune=cortex-a53 -mfpu=neon-fp-armv8 -mfloat-abi=hard -DMY_RADIO_RF24 -DMY_GATEWAY_LINUX -DMY_DEBUG -DLINUX_SPI_BCM -DLINUX_ARCH_RASPBERRYPI -Ofast -g -Wall -Wextra -std=c++11 -I. -I./core -I./hal/architecture/Linux/drivers/core -I./hal/architecture/Linux/drivers/BCM -c hal/architecture/Linux/drivers/core/EthernetServer.cpp -o build/hal/architecture/Linux/drivers/core/EthernetServer.o
g++ -MT build/hal/architecture/Linux/drivers/core/GPIO.o -MMD -MP -march=armv8-a+crc -mtune=cortex-a53 -mfpu=neon-fp-armv8 -mfloat-abi=hard -DMY_RADIO_RF24 -DMY_GATEWAY_LINUX -DMY_DEBUG -DLINUX_SPI_BCM -DLINUX_ARCH_RASPBERRYPI -Ofast -g -Wall -Wextra -std=c++11 -I. -I./core -I./hal/architecture/Linux/drivers/core -I./hal/architecture/Linux/drivers/BCM -c hal/architecture/Linux/drivers/core/GPIO.cpp -o build/hal/architecture/Linux/drivers/core/GPIO.o
hal/architecture/Linux/drivers/core/GPIO.cpp: In constructor ‘GPIOClass::GPIOClass()’:
hal/architecture/Linux/drivers/core/GPIO.cpp:53:71: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 48 [-Wformat-truncation=]
53 | snprintf(file, sizeof(file), "/sys/class/gpio/%s/base", de->d_name);
| ^~
hal/architecture/Linux/drivers/core/GPIO.cpp:53:33: note: ‘snprintf’ output between 22 and 277 bytes into a destination of size 64
53 | snprintf(file, sizeof(file), "/sys/class/gpio/%s/base", de->d_name);
|^
hal/architecture/Linux/drivers/core/GPIO.cpp:62:71: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 48 [-Wformat-truncation=]
62 | snprintf(file, sizeof(file), "/sys/class/gpio/%s/ngpio", de->d_name);
| ^~
hal/architecture/Linux/drivers/core/GPIO.cpp:62:33: note: ‘snprintf’ output between 23 and 278 bytes into a destination of size 64
62 | snprintf(file, sizeof(file), "/sys/class/gpio/%s/ngpio", de->d_name);
|^
g++ -MT build/hal/architecture/Linux/drivers/core/interrupt.o -MMD -MP -march=armv8-a+crc -mtune=cortex-a53 -mfpu=neon-fp-armv8 -mfloat-abi=hard -DMY_RADIO_RF24 -DMY_GATEWAY_LINUX -DMY_DEBUG -DLINUX_SPI_BCM -DLINUX_ARCH_RASPBERRYPI -Ofast -g -Wall -Wextra -std=c++11 -I. -I./core -I./hal/architecture/Linux/drivers/core -I./hal/architecture/Linux/drivers/BCM -c hal/architecture/Linux/drivers/core/interrupt.cpp -o build/hal/architecture/Linux/drivers/core/interrupt.o
hal/architecture/Linux/drivers/core/interrupt.cpp:33:10: fatal error: stropts.h: No such file or directory
33 | #include <stropts.h>
| ^~~~~~~~~~~
compilation terminated.
make: *** [Makefile:99: build/hal/architecture/Linux/drivers/core/interrupt.o] Error 1Then i need to make a hardware choice in domoticz : between USB,LAN or MQTT.
and that is something i don't understand because non are used. The NRF24L01 is connected to MOSI MISO of the RPI.sorry for the long Reply
:
The key is here:
hal/architecture/Linux/drivers/core/interrupt.cpp:33:10: fatal error: stropts.h: No such file or directory
33 | #include <stropts.h>
| ^~~~~~~~~~~
compilation terminated.
make: *** [Makefile:99: build/hal/architecture/Linux/drivers/core/interrupt.o] Error 1See https://forum.mysensors.org/topic/11138/mysensors-build-problem-on-ubuntu-20-04-rpi-or-tinker-board/2 for a possible workaround. Then restart from the make step.
Mysgw will only be created after successful make.
-
thanks for pointing this out .
i have added a empty file stropts.h with sudo touch stropts.h. in the dir : usr/include
then Build make
a lot of response with a lot of warnings but 1 error at the end
(last lines )
/usr/bin/ld: build/examples_linux/mysgw.o: in function.LANCHOR1': /home/pi/MySensors/./hal/architecture/Linux/drivers/core/config.h:39: multiple definition ofconf'; build/hal/architecture/Linux/drivers/core/config.o:/home/pi/MySensors/hal/architecture/Linux/drivers/core/config.h:39: first defined here
collect2: error: ld returned 1 exit status
make: *** [Makefile:80: bin/mysgw] Error 1and still no "If there were no errors during compilation the file bin/mysgw will be created"
any idea were to look for this error ?
thanks -
thanks for pointing this out .
i have added a empty file stropts.h with sudo touch stropts.h. in the dir : usr/include
then Build make
a lot of response with a lot of warnings but 1 error at the end
(last lines )
/usr/bin/ld: build/examples_linux/mysgw.o: in function.LANCHOR1': /home/pi/MySensors/./hal/architecture/Linux/drivers/core/config.h:39: multiple definition ofconf'; build/hal/architecture/Linux/drivers/core/config.o:/home/pi/MySensors/hal/architecture/Linux/drivers/core/config.h:39: first defined here
collect2: error: ld returned 1 exit status
make: *** [Makefile:80: bin/mysgw] Error 1and still no "If there were no errors during compilation the file bin/mysgw will be created"
any idea were to look for this error ?
thanksThe bew error you got is discussed in https://forum.mysensors.org/topic/11448/config-h-39-first-defined-here/4
Easiest way is probably to switch to the development branch of mysensors.
Run
git checkout developmentand then start over from the configure step. Or follow the step ”To use the development version with the latest updates” on the raspberry pi gateway build page. -
Sounds like a plan but i am just a monkey that's able to push some buttons so very little knowledge of linux.
Tried to start with the development version but it seems that the previous version has to removed.
"fatal: destination path 'MySensors' already exists and is not an empty directory". -
@goblin said in mysensors on rpi with NRF2401 with Domoticz:
fatal: destination path 'MySensors' already exists and is not an empty directory
Seems like you're trying to clone the MySensors git repo but there's already an existing MySensors folder. This is a typical git error message.
If you haven't given up yet, you could rename the Mysensors folder to something else and git-clone the development branch as advised by @mfalkvidd.
(As a general advise, if you are unsure, it might be an option to just ask ChatGPT about the error messages, describing your scenario. It knows git and Mysensors ;-))
-
thanks dirkju. have tried the ChatGPT method and used --branch development.
i haven't give up hope (yet)
MySGW is running but are stuck at the choice between MySensors Gateway with MQTT, with LAN interface or USB. although it is connected via MOSI/MISO of the RPI
So basically the configure -- ?? settings and the Domoticz hardware settings.
thank -
Hi goblin, so you got MySGW compiled successfully now using the development branch in git? That's great to hear! I do not have experiences with RPi gateways, neither Domoticz. But I believe choosing the Ethernet option is the easiest to configure (see Domoticz). Does that work for you?
-
i was not able to get MySensors running in domoticz but i will thing CHATgpt will help getting it to work
