MQTT gateway freezes on reboot/powering off and back on.
-
I have been facing this issue for quit a while. Every time I turn power off and on my mqtt gateway, it freezes. I have to reset the arduino uno to fix it. I'm using 1.4b version, arduino uno and w5100 ethernet shield if that helps.
I will appreciate your help with this issue. It's really annoying to rest it every time I reboot the gateway.
Thanks.
-
I think the something about order of initialisation was changed that fixed this problem. Try 1.4.1
1 out of 2
Suggested Topics
-
ENC28j60 MQTT problem
Troubleshooting • 2 Dec 2014, 21:27 • bomber 4 Dec 2014, 05:48 -
💬 HALO : ESP32 multi transport GW/Bridge for Mysensors
OpenHardware.io • 29 May 2017, 10:43 • openhardware.io 15 Dec 2019, 18:25 -
Need some minor help with MQTT strings
Troubleshooting • 22 Dec 2015, 23:09 • drock1985 23 Dec 2015, 16:01 -
Soil Tensiometer Sensor Network
My Project • 16 Feb 2015, 19:19 • aur 17 Jun 2016, 11:35 -
Node-red msg queue form Controller to Gateway over MQTT
Development • 16 Sept 2020, 07:43 • alexelite 16 Sept 2020, 07:43 -
💬 Mysensors 2.0 ethernet gateway (W5100) build.
OpenHardware.io • 1 Sept 2016, 18:35 • openhardware.io 5 Feb 2018, 07:05
