Serial Gateway problem after update
-
Hi, my Vera Edge was updated to version 1.7.1089, now my relays are not working properly, i can still send the commands from the arduino to change the state, but if i try to click on/off button on the controller´s UI, never happens, seens that they changed the way vera controll the devices.
There is a way to debug using ssh?
-
Hi, my Vera Edge was updated to version 1.7.1089, now my relays are not working properly, i can still send the commands from the arduino to change the state, but if i try to click on/off button on the controller´s UI, never happens, seens that they changed the way vera controll the devices.
There is a way to debug using ssh?
@mjunqueira Try to delete the Arduino Relays and pair it again. Prior to pairing flash the node. Perhaps that might fix the issue.
It has been 24hrs since I have used a Serial Gateway on UI7. I have nothing to complain yet... fingers cross :v:
Out of curiosity. How is your gateway setup like? e.g: Uno's, Nano, type of Radio, etc? My current setup, I'm using a Nano Pro with a NRF24L01+ 2.4GHz Wireless. I'm planing to switch to RF24L01+PA+LNA Antenna version when it comes in the mail.
-
Hi, my Vera Edge was updated to version 1.7.1089, now my relays are not working properly, i can still send the commands from the arduino to change the state, but if i try to click on/off button on the controller´s UI, never happens, seens that they changed the way vera controll the devices.
There is a way to debug using ssh?
-
I think I understand the problem you're having. I have the same problem after upgrading to version 1.7.1089. I don't think its related to Serial firmware update. Because it behaves the same on Ethernet gateway.
the guys at Vera wants to help but I don't know how to explain this issue to them.
-
I think I understand the problem you're having. I have the same problem after upgrading to version 1.7.1089. I don't think its related to Serial firmware update. Because it behaves the same on Ethernet gateway.
the guys at Vera wants to help but I don't know how to explain this issue to them.
-
I was able to use the actuators for a month with the serial gateway, The problem began after vera provided the firmware 1.7.1089, i can send status commands like gw.loadState and gw.send but the incomingMessage callback is not working.
using the sniffer, i can see that the controller is not sending any message.
i have tried more than once to remove everything and configure back.
I´m going to ask vera what they changed in the lastest firmware, hope that they can help us.
-
I was able to use the actuators for a month with the serial gateway, The problem began after vera provided the firmware 1.7.1089, i can send status commands like gw.loadState and gw.send but the incomingMessage callback is not working.
using the sniffer, i can see that the controller is not sending any message.
i have tried more than once to remove everything and configure back.
I´m going to ask vera what they changed in the lastest firmware, hope that they can help us.
@mjunqueira What actuators sketch are you using? I manage to get it to work using My Sensor single button actuator relay from the library. I'm having problems using Multi Button array sketch.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login