button problem

[BulldogLowell]

@ferpando

have you tried to change the debouncer interval to 1000ms?

debouncer.interval(1000)

[ferpando]

I tried to rise it above 20 but it just stops working.

[BulldogLowell]

@ferpando

you are using "Door/Window & Pushbutton" sketch?

try this:

PushbuttonWithLockout.ino

[ferpando]

I'm using a multi binary sketch for 2 buttons.
I'll take a look at yours.

Could it be the vera plugin what's causing the restarts?

[BulldogLowell]

@ferpando said:

I'm using a multi binary sketch for 2 buttons.
I'll take a look at yours.

Could it be the vera plugin what's causing the restarts?

I would look at the vera log while you are doing a button push.

The two button sketch should be no problem. If you need help, post it and I can try my best.

[ferpando]

I'm having some problems with these buttons.
They work but sometimes Vera just restarts.
I'll try to loot at vera logs and see.

Keep you posted.
Thanks for the help

[hek]

Which Vera version are you using? Vera 2?

I doubt the MySensors plugin makes Vera restart unless it is very low on memory or overloaded with other work.

[ferpando]

@hek
I currently have a vera lite running.
It never restarts but when it does is after I push a button, no action is fired, then I push again maybe 2-3 times and then I find Vera is restarting.
I still have no proof but I'll try to find something in the logs.

[BulldogLowell]

@ferpando said:

@hek
I currently have a vera lite running.
It never restarts but when it does is after I push a button, no action is fired, then I push again maybe 2-3 times and then I find Vera is restarting.
I still have no proof but I'll try to find something in the logs.

did the lockout help?

I agree with Hek, it seems like there must be something up on the vera side.

[ferpando]

@BulldogLowell
Didn't have the chance to test it yet.
I also have an RFXcom device attached to vera. Maybe they don't like eachother? Anyone has one?

[korttoma]

I do have both the mysensors gateway and a RFXtrx433 attachced to a veralite. My system is stable now but I have allso had issues with memory and have uninstalled everything I absolutely did not need and simplyfied everything I could. If your vera is acting strange I would check my memory status.

[ferpando]

@korttoma
could you post your memory usage for comparison?

[korttoma]

memoryTotal 62480
memoryFree 8360
memoryBuffers 5652
memoryCached 17336
memoryUsed 54120
memoryAvailable 25696

I began to have issues once memoryAvailable is less than 20000.

[ferpando]

@korttoma
this is what I currently have on my vera lite:

                total         used         free       shared      buffers
    Mem:        62480        55376         7104            0         6304
   Swap:            0            0            0
  Total:        62480        55376         7104

how do you get the 'memoryAvailable'?

[korttoma]

I have the "System Monitor" plugin installed so I get it as a Variable in the advanced tab.