Sensebender Micro

[hek]

@hautomate said:

3,091 in stock

That's the old A10. It would probably work but A20 has some firmware fixes and more tests performed on it.
I have nothing to say about the price. It is the same as for A20.. As you can see it is the most expensive part on the micro board (30% of it's price).

[hautomate]

@hek, thanks for the correction. I didn't try very hard, but here's 75 ready to ship.

[RJ_Make]

Notification for my 5... Yeaaaaa Haaaaaaw.. :dancer:

[tbowmo]

@hautomate

They are building them in batches of 200 units, so 75 si7021's don't get them far.

We are trying to solve things at the moment though.

[hek]

Preorders for batch #2 has been opened now. Estimated delivery mid June.

[gloob]

I will wait for the first 5 items until they receive before I continue ordering new ones or is there no plan to continue selling more items after the second batch?

[tbowmo]

@gloob

We'll continue selling, as long as there is a demand for it :)

[gloob]

I believe in your product and ordered 5 new ones. The house has too many rooms.

[Stric]

Got mine today. Haven't tried them yet.

[hek]

@Stric
Nice! Where do you live? Wonder when it will show up in Sweden....

[Stric]

Sweden :) Umeå/Täfteå to be specific.. Neighborhood next to your brother..

[hek]

Sweet.. hope it arrives before the weekend then.

[HenkeP]

@Stric Did you get a "avi", or did they end up in the mail-box directly? I got a "avi" today but it might be also for any of the constant inflow of stuff from aliexpress... Can't wait for my 4 pieces Sensebender to show up! :)

[Stric]

@HenkeP Got an avi, RsomethingsomethingHK I believe.. The box said "10 printed circuit boards", which is a funny way of saying "3 printed circuit boards + some stuff".

[gloob]

Were you able to track the items? My tracking number says that it left Hong Kong yesterday to my destination (Germany). Can't wait to get the first batch into hands.

[gol]

I can confirm that the first sensebenders now also have arrived in Gothenburg, Sweden.

[gol]

My first Senseboard is now Up and Running. Have even tested to reinstall the sketch. No issues so far. Thanx for this product.

[tbowmo]

@gol

Nice to hear :)

I have to wait until Monday, before I can pick mine up at the post office.. (they tried to deliver it today, when I wasn't at home, so just left me a note that I could pick it up on Monday)

[marceltrapman]

@gol said:

My first Senseboard is now Up and Running. Have even tested to reinstall the sketch. No issues so far. Thanx for this product.

This is not a 'product', this is pure fun ;)

[HenkeP]

Picked up my four devices yesterday and two of them are up and running using the pre-loaded sketch and it works like a charm!

But i have a question regarding the battery level reporting, I can see the following in the code:

// Battery voltage is repported as child sensorId 199, as well as battery percentage (Internal message)

But it seems to only present temp and hum as sensors and no voltage:

gw.present(CHILD_ID_TEMP,S_TEMP);
gw.present(CHILD_ID_HUM,S_HUM);

What is it i'm failing to understand? I just setup Domoticz and in there I have not yet got a good way of presenting historical battery levels, it just shows the latest internal battery level message. To get a better understanding on the battery life performance it is necessary to be able to create a graph. I thought I could use the voltage level for this but I can only see the internal message :-(

Thanks,
Henrik