Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you may not be able to execute some actions.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

Led dimmer board / openmili integration?

kapperi last edited by

Hello to you gurus...

I currently have milight controlled led strips in livingroom roof and in bottom of my kitchens cabinets. Im planning to add leds in top of my cabinets too.

All the wiring comes to same place and it would be easy to control all the lights with mysensors.

Kitchen leds works with 24v and livingroom leds works with 12v.

Actual question is that what is the best solution to control two ledstrips in 12v and two ledstrips with 24v, ill already have transformers for this.

Im intrested of using milight remote controller to control my lights, has anyone tried this openmili thing with arduinos?

Electrics isnt the problem, ill can manage with it. Ofcourse if you have some solutions to make 3.3v, 5v from 24v to handle arduino and radio and 12v to handle a ledstrips witch take about 50w. This all have to fit in same mainboard so i would manage with only 24v transformer.
Reply Quote 0
1 Reply Last reply

1
Posts

870
Views

Suggested Topics

Arduino Celebrates 10 years (Malmö/Sweden)
Announcements • • hek

1

0
Votes

1
Posts

3304
Views

No one has replied
FOTA using OptiBoot copy_flash_pages
Development • • eiten

2

0
Votes

2
Posts

23
Views

IT WORKS I got a first working version, using an ATmega1284P running on MightyCore 2.2.2 (as soon as I began developement, they switched from Optiboot to Urboot in version 3.0.0, whicht does not include the copy_flash_pages function anymore, but I'm working on a work around there). Only thing I could not solve is to do a CRC check of the image after download... You can try it out here: https://github.com/eiten/MySensors/tree/FOTAInternalFlashTest It's not beautiful yet with much Serial.prints in it, but maybe it helps you if you find errors.
Sensebender Gateway (SAMD21)
Development • • pikim

10

0
Votes

10
Posts

55
Views

Just for completeness: the right way to do this is to add the json under ~/.platformio/boards and the other files as described in https://community.platformio.org/t/how-use-a-same-chip-but-with-different-environment/18082/4
Gateways
Development • esp8266 raspberry pi serial gateway nano rpi tcp gateway mqtt gateway • • OldSurferDude

2

0
Votes

2
Posts

23
Views

@OldSurferDude well, the ESP8266 is limited to 4 TCP clients in arduino IDE. This can't be really increased. I did som experiments and you can set it up to 15, but after the 5th client on my web server, I got a freeze. Maybe you got something wrong. #define MY_GATEWAY_MAX_CLIENTS 2 defines how many controllers (eg Home Assistant) can connect to the gateway, not how many sensors/MySensors devices. And yes, you can have multiple TCP gateways in HomeAssistant. I got an NRF24, an RFM95 long range and a RFM95 short range gateway (all based on ESP32) on the same Home Assistant. Regards, Edi
[mysensors] Not a valid message: invalid literal for int() with base 10: '\x00\x000'
Development • • kiesel

3

0
Votes

3
Posts

17
Views

Thanks, I'll keep this in mind if I decide to debug it. I realized that I am also tired of patching the gateway through to the doctor container inside an LXC so now I am looking at creating an esp gateway. Just need to check if I can find a pcb on here. Thanks again!
Saving last known good state, but not in EEPROM
Development • • OldSurferDude

5

0
Votes

5
Posts

19
Views

@eiten said in Saving last known good state, but not in EEPROM: utility meter in home assistant This is exactly what I am seeking! Thank you! PS I truly enjoy reverse translating! It teaches me how to better understand my first language and it gives me alternate words to use in searches. So a second thank you! "Regelmässiges Zurücksetzen" would be best translated to English in this context as "Periodic Reset". In the English version of Home Assistant it is called "Meter reset cycle" (I remember seeing "keep dry" translated as "do not take in shower with you"

Led dimmer board / openmili integration?

Suggested Topics

Arduino Celebrates 10 years (Malmö/Sweden)
Announcements • • hek

FOTA using OptiBoot copy_flash_pages
Development • • eiten

Sensebender Gateway (SAMD21)
Development • • pikim

Gateways
Development • esp8266 raspberry pi serial gateway nano rpi tcp gateway mqtt gateway • • OldSurferDude

[mysensors] Not a valid message: invalid literal for int() with base 10: '\x00\x000'
Development • • kiesel

Saving last known good state, but not in EEPROM
Development • • OldSurferDude

48
Online

11.4k
Users

11.1k
Topics

112.7k
Posts

Led dimmer board / openmili integration?

Suggested Topics

Arduino Celebrates 10 years (Malmö/Sweden) Announcements • • hek

FOTA using OptiBoot copy_flash_pages Development • • eiten

Sensebender Gateway (SAMD21) Development • • pikim

Gateways Development • esp8266 raspberry pi serial gateway nano rpi tcp gateway mqtt gateway • • OldSurferDude

[mysensors] Not a valid message: invalid literal for int() with base 10: '\x00\x000' Development • • kiesel

Saving last known good state, but not in EEPROM Development • • OldSurferDude

48Online

11.4kUsers

11.1kTopics

112.7kPosts

Arduino Celebrates 10 years (Malmö/Sweden)
Announcements • • hek

FOTA using OptiBoot copy_flash_pages
Development • • eiten

Sensebender Gateway (SAMD21)
Development • • pikim

Gateways
Development • esp8266 raspberry pi serial gateway nano rpi tcp gateway mqtt gateway • • OldSurferDude

[mysensors] Not a valid message: invalid literal for int() with base 10: '\x00\x000'
Development • • kiesel

Saving last known good state, but not in EEPROM
Development • • OldSurferDude

48
Online

11.4k
Users

11.1k
Topics

112.7k
Posts