Can't see any sensors in Domoticz

[ErrK]

Hi.
I have just started to build my sensors and now i got a problem that i hope you can help me with.

I am using version 1.5.1 of the API.
Have a ESP8266 Gateway that i only change ssid and password from the example sketch.

In Domoticz (version 2.3799) i have added the gateway as an "MySensors Gateway with LAN interface" with the right ip and port 5003.
I can see in the log in Domoticz

2015-12-12 22:03:52.065 MySensors: connected to: 10.0.1.6:5003
2015-12-12 22:03:52.066 MySensors: Gateway Ready... 

I have also created a MotionSensor and the logg when i start it is looks like this.

sensor started, id=255, parent=255, distance=255
find parent
send: 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,st=bc:
find parent
send: 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,st=bc:
find parent
send: 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,st=bc:
0
find parent
send: 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,st=bc:
1
find parent
send: 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,st=bc:

The log for my gateway when i trigger a motion infront of my MotionSensor is this.

0;0;3;0;9;read: 255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=8,pt=1,l=1,sg=0,st=bc:0
0;0;3;0;9;read: 255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=8,pt=1,l=1,sg=0,st=bc:0
0;0;3;0;9;read: 255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=8,pt=1,l=1,sg=0,st=bc:0
0;0;3;0;9;read: 255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=8,pt=1,l=1,sg=0,st=bc:0

So i think it looks like the gateway can see what the MotionSensor send.

But i can't find the MotionSensor in Domoticz.
I am also using the Domoticz for my z-wave components.

Any one that can give me some tips on what i do wrong?

[sundberg84]

id=255 means it has not got any ID yet, strange.
What does the gw log looks like when you power on the node?

[ErrK]

Thanks for your quick response.

When i start the gateway it looks like this.

rlx00l��|x00�l�|�l�b|����r�b�b��nn�lnn���bp��lrlrlp�n��l��bn�|l����b��nn�x00l��l`�nnl`nr���n��l`r��n��l`��n�

ESP8266 MySensors Gateway
Connecting to XXX
...Connected!
IP: 10.0.1.6
0;0;3;0;9;gateway started, id=0, parent=0, distance=0

And when i start the motionSensor it looks like this in the gateway.

0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0:
255;255;3;0;3;
0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0:
255;255;3;0;3;
0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0:
255;255;3;0;3;
0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0:
255;255;3;0;3;

In the motionsensor it looks like this.

sensor started, id=255, parent=0, distance=1
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
0
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
1
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
0

I have now connect them to two seperate usb ports on my Mac to use the serial monitor.

[ErrK]

I have now tried to reuplode the sketch to both the gateway and the sensor.

I think the problem is with the gateway.
Look here at the log.

tail 0
chksum 0x42
csum 0x42


ESP8266 MySensors Gateway
Connecting to XXX
...Connected!
IP: 10.0.1.6
0;0;3;0;9;gateway started, id=0, parent=0, distance=0
Client 0 connected
0;0;3;0;14;Gateway startup complete.
0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0:
255;255;3;0;3;
Client 0: 0;0;3;0;2;

Exception (28):
epc1=0x4000bf80 epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000000 depc=0x00000000

ctx: cont 
sp: 3ffeac40 end: 3ffeaec0 offset: 01a0

>>>stack>>>
3ffeade0:  00000080 3fffc6fc 3ffe977f 40203ac0  
3ffeadf0:  3ffeaf20 00000001 3ffe8f8f 4020b794  
3ffeae00:  3ffeaf20 00000009 3ffe9872 00000000  
3ffeae10:  00000003 00000000 3ffe9860 4020ae11  
3ffeae20:  00000001 3ffe9869 3ffeaf20 4020ae11  
3ffeae30:  3ffe9869 3ffe9869 3ffeaf20 3ffeaf20  
3ffeae40:  3ffe9869 3ffe9778 3ffe977f 402024b4  
3ffeae50:  3ffe9a68 3ffe9869 00000000 40202784  
3ffeae60:  3ffe8e18 00000000 000003e8 3ffe9bf8  
3ffeae70:  00000000 3fff4c28 3fff4bb8 3ffeaeec  
3ffeae80:  00000000 0000000a 00000000 00000000  
3ffeae90:  40201c35 0601000a 00000000 3ffeaeec  
3ffeaea0:  3fffdc20 00000000 3ffeaee4 40201c92  
3ffeaeb0:  00000000 00000000 3ffe9ea0 40100378  
<<<stack<<<

 ets Jan  8 2013,rst cause:2, boot mode:(1,7)


 ets Jan  8 2013,rst cause:4, boot mode:(1,7)

wdt reset

It craches when i connect the sensor.

[ErrK]

Now this is working.
I use Arduino 1.6.5 and develop version of mysensors API (1.6.0-beta) .
Here is how it looks in Domoticz

[mpp]

@ErrK, see this topic http://www.esp8266.com/viewtopic.php?f=6&t=10901

I had the same issue, pressing reset didn't work but reconnecting the USB cable did the trick.