PiDome Domotica/Home Automation

[John]

Oh dear, we are already at build 540 for the server with full platform build at: 0.1-snapshot-2015-09-05.746. The next server build version will probably stay at 540 but the platform number will become 747. I will notify here when there is an update.

Build 747 will require you to update the android, desktop or raspberry pi client if in use, so be prepared ;)

Cheers.

[EDIT]
I can confirm the battery level is not handled correctly. I'm on it now. The issue is that the data type is not handled correctly. If you would have used something else then float it would not work. I'm doing an explicit cast to float and did not respect the set type as set in the device editor. Currently testing and updating.
[/EDIT]

[John]

There currently is a new version of the server being built on the build server. The location is: http://builder.pidome.org/view/Snapshot builds/

When it's done you can click 0.1-snapshot-2015-09-06.747 and download the server. On the pi stop the server, overwrite files, and start it again. Don't worry, important data will not be overwritten (as with any update)

You can see it is done when on the left side there are no active jobs being displayed.

Let me know if it has been solved for you.

[AndrewB]

Thanks for the quick responses and update!

I downloaded and installed the new version on my pi, confirmed it was the correct version inside of pidome, however it is still not working. :/

[John]

Could you make a screenshot of your created device it's

• Group control details
• Control details

And check in the file logs/system/appLog.txt if you got messages mentioning mysensors? (quite at the end, you can do a "tail-f log/system/appLog.txt -n 200" in putty "ctrl+c" to stop it, select lines, click (copy) and paste them)

[AndrewB]

I currently have debug enabled, will that make a difference on what you want from the log file?

[John]

Well that would give a big amount of data, and it definitely will help... If you do not mind i will send my email address using chat so i can send you files if needed what could help in solving this quicker.

[AndrewB]

Sure! No problem!

[John]

Send via chat

[John]

With help from @AndrewB The issue has been solved.

The battery level via the MQTT gateway seems to need some extra attention as it is broadcasted in an unexpected mqtt path.

to show battery level using mqtt please use group id "255" and control id "V_"

Cheers!

[bramasa]

@John
Hi John,

I also stuck on the same problem as Eric has described. His post is quite a long time ago, so I don't know, if there is a solution now. The point is that I want not only transfer a status on/off to the mysensor node but the house and device code for the RF switches. I tried to do this as you have answered but if i look in the log file it say only true or false as payload to the sensor.

Is this a limitation of using V_LIGHT (allowing only boolean coded payload)? But I also tried to use other V_* like V_IR_SEND, it was the same result.

Thanks in advance.

[John]

Sorry for the late response, have you tried to change the datatype to string with the codes as the values?

[bramasa]

Hi John,
appLog.txt
I also tried using datatype string but it doesen't work. Meanwhile I have studies the log files more detailed and found the following behavior:

• when defining the device skeletal and when updating the derived device (first approx. 25 lines in the log file V_STATUS is declared as string with values 51 resp. 52 as specified in the web interface. The entity is "Modul 433 MHz".

• Later on, when using the toggle switch in the web interface the value has changed in the decription in the log file (see line 164 or 185) value has been changed to on/off. With this definition it seem that the mysensors-Plugin is feeded has been changed from the specified values.

My conclusion is that the change is taking place somewhere outside the mysensors-plugin.

By the way, if I change the type to string do I have to use quotation marks in the web interface?

Thanks a lot for your support.

Martin