Need some help to start....
-
Hi Mark!
Which library do you run? Also upload the code so we can have a look.
Is it the normal motionsensor example? If so it looks like it cant find MySensors liberary.(Line 30): #include <MySensor.h>
Have you downloaded and installed the liberary? -
@mark76 If you dont get it to work i would reinstall the library: http://www.mysensors.org/about/arduino#installing-the-sensor-libraries
Im not sure - but since its that line where you include mysensors it believe it cant find the lib. -
I have now tried to re-install lib 3x.... I am stumbeling a little bit, cause I have allready a libraries folder and have copied all folders from MySensors- library folder to that folder... cause my understanding is that all libraries should be in the same folder....
-
That sounds right. When you open arduino ide do you find MySensors under the example menu?
-
Hi!
Any luck @mark76 ? Only difference from me is that you run 1.6.7 arduino IDE... but that shouldnt make the errors... Can you post a code/screeshot of all the error? (Complete log). -
If nothing else works you could try download another version and try... but i doubt it.
-
One question regarding that issue.... Do I have to tell the Sketch that I am working with nrf24? That library is very big and it is not easy to get an overview what library is doing in the backround.... But from my point of view I should define the Radio I use... (?)
