Need some help to start....

[mark76]

Yes, I have downloaded the last version of library- path is showing in failure... and it is the example code w/o changings...

[sundberg84]

@mark76 If you dont get it to work i would reinstall the library: http://www.mysensors.org/about/arduino#installing-the-sensor-libraries
Im not sure - but since its that line where you include mysensors it believe it cant find the lib.

[mark76]

I have now tried to re-install lib 3x.... I am stumbeling a little bit, cause I have allready a libraries folder and have copied all folders from MySensors- library folder to that folder... cause my understanding is that all libraries should be in the same folder....

[sundberg84]

That sounds right. When you open arduino ide do you find MySensors under the example menu?

[ericvdb]

Your libraries folder should look like this:

Then you should see in the arduino gui:

[mark76]

yes.... every thing seams to be correct...

[sundberg84]

Hi!
Any luck @mark76 ? Only difference from me is that you run 1.6.7 arduino IDE... but that shouldnt make the errors... Can you post a code/screeshot of all the error? (Complete log).

[mark76]

No chance.... error is only that one I have postet... Could be that the IDE causes the problem?

[sundberg84]

If nothing else works you could try download another version and try... but i doubt it.

[ericvdb]

As you can see in my screenshots, i'm also running 1.6.7 and i have no issues at all.

[mark76]

One question regarding that issue.... Do I have to tell the Sketch that I am working with nrf24? That library is very big and it is not easy to get an overview what library is doing in the backround.... But from my point of view I should define the Radio I use... (?)

[mark76]

I have now decided to stay at TmrH20 - Basis... that is working fine for me...

Thanks to all, trying to help.