[SOLVED] No message after few hours
-
I'm testing the network with domoticz on a raspberry and a couple of arduino nano with dht11 sensors.
Everything works fine, but after few hours it seems my nodes stop transmitting. Robooting arduino solves the problem.
Any idea? -
I'm testing the network with domoticz on a raspberry and a couple of arduino nano with dht11 sensors.
Everything works fine, but after few hours it seems my nodes stop transmitting. Robooting arduino solves the problem.
Any idea?@gerseun DHT reading issue? Transmit batteryLevel or some other heartbeat message every hour to find out.
-
I am a newbie with arduino, what is a heartbeat message?
-
I am a newbie with arduino, what is a heartbeat message?
@gerseun I just mean anything that tells you it's alive. Any kind of message sent to you at a known interval. It could be a flashing LED, radio message logged by controller or whatever.
-
I'm testing the network with domoticz on a raspberry and a couple of arduino nano with dht11 sensors.
Everything works fine, but after few hours it seems my nodes stop transmitting. Robooting arduino solves the problem.
Any idea? -
I think I solved it.
The reading from the sensor is good bad the trasmission stop randomly, so I tried to add coupling capacitors on the wirless module.
It's more then 24h without problem so I think this solves it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login