4 channel AC dimer.
-
Has anyone used these or have any comments?
Thanks,
Richard -
Has anyone used these or have any comments?
Thanks,
Richard@csa02221862 A nice board if you look at the total package. However these are basic triac dimmer circuits (AC) with optocoupler isolation. You need to be aware that the steering circuit (arduino/ raspberry) needs to take care of the zero cross detection and firing of the triacs. It has been discussed a few times on this forum. Basically a circuit like this:
Where the upper part measures the "AC sine wave" (needed only once) and the part below the steering circuit (to be repeated for each channel)
Building it with Ailexpress parts should not cost you more than €/$ 1 per channel. But as I said you don't get the complete assembled package)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login