Internal I_REBOOT command
-
Does the 1.4 I_REBOOT command rely on having the OTA boot loader installed or can this be used to reboot a sensor node running 1.4 without having the OTA boot loader installed? I would like to reset my sensors on occasion without having to power cycle them. I have tried sending this via my GW but the node seems to ignore it.
11;1;3;0;13;1
-
You have to have a bootloader with watchdogs enabled like optiboot or the MySensors bootloader.
1 out of 2
Suggested Topics
-
Arduino Celebrates 10 years (Malmö/Sweden)
Announcements • 29 Mar 2014, 17:08 • hek 29 Mar 2014, 17:08 -
MQTT-Help me understand about the MQTT Gateway.
Development • 2 Mar 2025, 01:44 • dpcons 22 days ago -
Counting Incoming and Outgoing Messages from a Gateway
Development • 10 Dec 2024, 21:57 • Trand 14 Dec 2024, 20:23 -
Home Assistant/MySensors quirks
Development • 18 days ago • OldSurferDude 18 days ago -
Saving last known good state, but not in EEPROM
Development • 30 Jan 2024, 18:46 • OldSurferDude 15 Jan 2025, 08:51 -
Gateway without a radio
Development • 12 Jan 2025, 23:19 • OldSurferDude 14 Jan 2025, 22:07
