[solved] Problem with ioBroker and MySensors 2.0

[Bluefox]

Accordingly to http://forum.iobroker.net/viewtopic.php?f=12&t=3577&start=20#p36227 he has 2.0 Serial with
Seeeduino for the gateway (serial)
Seeeduino for the chicken shed
Sensebende for the temperature sensor
Raspberry pi 2 and 3 for the controller

BTW, is it not the good idea to print the version out in log? What is this? 0;255;0;0;18;2.0.0

[hek]

Might be best to ping @stefaanv here...

How does the log look on the node where the presentation messages is sent from?
Do you get failed transmissions?

[Bluefox]

And this one must be a sketch: http://forum.iobroker.net/viewtopic.php?f=12&t=3577&start=20#p36212

[hek]

Ok, it sends 9 presentations in a row.... Might be too much depending on how the radio is powered and decoupled.

Introducing a wait(50) between each presentation message could resolve the problem.

[Bluefox]

I have this one log from him:

0;255;3;0;9;TSP:MSG:READ 2-2-0 s=2,c=1,t=1,pt=2,l=2,sg=0:0
2;1;1;0;0;23.5
0;255;3;0;9;TSP:MSG:READ 2-2-0 s=1,c=1,t=0,pt=7,l=5,sg=0:23.5
1;8;1;0;2;0
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=8,c=1,t=2,pt=1,l=1,sg=0:0
1;7;1;0;39;-12.17
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=7,c=1,t=39,pt=7,l=5,sg=0:-12.17
1;255;3;0;0;75
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=255,c=3,t=0,pt=1,l=1,sg=0:75
1;5;1;0;36;1
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=5,c=1,t=36,pt=2,l=2,sg=0:1
1;2;1;0;1;63.38
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=2,c=1,t=1,pt=7,l=5,sg=0:63.38
1;2;1;0;0;12.87
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=2,c=1,t=0,pt=7,l=5,sg=0:12.87
1;2;1;0;38;12.56
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=2,c=1,t=38,pt=7,l=5,sg=0:12.56
1;2;1;0;39;-43.80
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=2,c=1,t=39,pt=7,l=5,sg=0:-43.80
1;1;1;0;23;17.69
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=1,c=1,t=23,pt=7,l=5,sg=0:17.69
1;255;3;1;0;1475773988
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=255,c=3,t=0,pt=0,l=10,sg=0:1475773988
0;255;3;0;9;TSP:MSG:SEND 0-0-1-1 s=255,c=3,t=0,pt=0,l=10,sg=0,ft=0,st=ok:1475773988
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=255,c=3,t=1,pt=0,l=0,sg=0:
0;255;0;0;18;2.0.0
0;255;3;0;9;Init complete, id=0, parent=0, distance=0, registration=1
0;255;3;0;9;No registration required
0;255;0;0;18;2.0.0
0;255;3;0;14;Gateway startup complete.
0;255;3;0;9;TSM:READY
0;255;3;0;9;TSM:GW MODE
0;255;3;0;9;TSM:RADIO:OK
0;255;3;0;9;TSM:INIT
0;255;3;0;9;Starting gateway (RNNGA-, 2.0.0)

Is the information you required there?

[Bluefox]

@hek said:

Ok, it sends 9 presentations in a row....
Where can you see that?
It is really strange I have my answer ready and wait for 2 minutes to send it out. In this time you answer on my previous question and my answers looks silly because the it is old.

[Bluefox]

@hek said:

Introducing a wait(50) between each presentation message could resolve the problem.

I do not understand, should ioBorker use wait(50) or Sketch? (I guess sketch, but to be sure)

[hek]

In the sketch.

[stefaanv]

@hek
We're making progress. I'm already seeing both nodes in ioBroker Objects tree. The sensebender node also reports temperature and humidity.

Still, none of the measurements from the chicken shed node get through. Underneath is the log from this node, hope you can make any sense of it. I see a lot of FPAR:FAIL's, hope this is something that can be solved.

Stefaan

Starting sensor (RNNNA-, 2.0.0)
TSM:INIT
TSM:RADIO:OK
TSP:ASSIGNID:OK (ID=1)
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
!TSM:FPAR:FAIL
!TSM:FAILURE
TSM:PDT
TSM:INIT
TSM:RADIO:OK
TSP:ASSIGNID:OK (ID=1)
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
!TSM:FPAR:FAIL
!TSM:FAILURE
TSM:PDT
TSM:INIT
TSM:RADIO:OK
TSP:ASSIGNID:OK (ID=1)
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
!TSM:FPAR:FAIL
!TSM:FAILURE
TSM:PDT
TSM:INIT
TSM:RADIO:OK
TSP:ASSIGNID:OK (ID=1)
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSP:MSG:READ 0-0-1 s=255,c=3,t=8,pt=1,l=1,sg=0:0
TSP:MSG:FPAR RES (ID=0, dist=0)
TSP:MSG:PAR OK (ID=0, dist=1)
TSM:FPAR:OK
TSM:ID
TSM:CHKID:OK (ID=1)
TSM:UPL
TSP:PING:SEND (dest=0)
TSP:MSG:SEND 1-1-0-0 s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=ok:1
TSP:MSG:READ 0-0-1 s=255,c=3,t=25,pt=1,l=1,sg=0:1
TSP:MSG:PONG RECV (hops=1)
TSP:CHKUPL:OK
TSM:UPL:OK
TSM:READY
Kippenhok_4
Motor stopped at 60735
application started
TSP:MSG:SEND 1-1-0-0 s=255,c=3,t=1,pt=0,l=0,sg=0,ft=0,st=ok:
TSP:MSG:SEND 1-1-0-0 s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=ok:0100
!TSP:MSG:SEND 1-1-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=fail:2.0.0
!TSP:MSG:SEND 1-1-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,ft=1,st=fail:0
TSP:MSG:READ 0-0-1 s=255,c=3,t=0,pt=0,l=10,sg=0:1476000019
TSP:MSG:ACK msg
TSP:MSG:SEND 1-1-0-0 s=255,c=3,t=0,pt=0,l=10,sg=0,ft=2,st=ok:1476000019
!TSP:MSG:SEND 1-1-0-0 s=255,c=3,t=11,pt=0,l=9,sg=0,ft=0,st=fail:Kippenhok
!TSP:MSG:SEND 1-1-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,ft=1,st=fail:1.0
!TSP:MSG:SEND 1-1-0-0 s=1,c=0,t=16,pt=0,l=0,sg=0,ft=2,st=fail:
!TSP:MSG:SEND 1-1-0-0 s=2,c=0,t=30,pt=0,l=0,sg=0,ft=3,st=fail:
!TSP:MSG:SEND 1-1-0-0 s=3,c=0,t=6,pt=0,l=0,sg=0,ft=4,st=fail:
!TSP:MSG:SEND 1-1-0-0 s=4,c=0,t=7,pt=0,l=0,sg=0,ft=5,st=fail:
!TSM:UPL FAIL, SNP
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
Request registration...
!TSP:SEND:TNR
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
!TSP:SEND:TNR
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
!TSP:SEND:TNR
TSM:FPAR
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
!TSP:SEND:TNR
!TSM:FPAR:FAIL
!TSM:FAILURE
TSM:PDT
Init complete, id=1, parent=255, distance=255, registration=1
  ... loop ...
!TSP:SEND:TNR
Door Open, Lux 1407.40, luxState 1, camera off, (-)
Battery 12.07V, -11.90mA
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
--NO-- Time = 5, 0:0:5
  ... loop ...
!TSP:SEND:TNR
Door Open, Lux 1384.85, luxState 1, camera off, (-)
Battery 12.07V, -11.20mA
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
!TSP:SEND:TNR
--NO-- Time = 10, 0:0:10

[hek]

Something is not good. It keeps losing parent because it doesn't hear any ack:s sent by the gateway.

Did you put decouple capacitors on both gateway and repeater? Do you use none amplified radios?

[stefaanv]

@hek
Hadn't done any of the decoupling. Will do so next.
However, by moving the controller closer to the shed, The problem is solved !!

Thanks a million for the support !

[jopebe]

@stefaanv
Hallo, have the same problem.
I cannot see my node in IO-Broker. Read all the threads in this forum and in IObroker.
Same issue with inclusion mode. Don`t know, what else I can do.
I use the original Ethernet-Gateaway-Sketch from MySensors page, the original Temp-hum-sketch from MYsensors page and installed sometimes MYsensors-adapter in IOBroker.
I use the gateway as TCP-client.
What can I do?
Here the seriell protocol:
;255;3;0;9;Starting gateway (RNNGA-, 2.0.0)
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSM:RADIO:OK
0;255;3;0;9;TSM:GW MODE
0;255;3;0;9;TSM:READY
IP: 192.168.178.56
0;255;3;0;9;No registration required
0;255;3;0;9;Init complete, id=0, parent=0, distance=0, registration=1
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:MSG:READ 1-1-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
0;255;3;0;9;TSP:MSG:BC
0;255;3;0;9;TSP:MSG:FPAR REQ (sender=1)
0;255;3;0;9;TSP:CHKUPL:OK
0;255;3;0;9;TSP:MSG:GWL OK
0;255;3;0;9;TSP:MSG:SEND 0-0-1-1 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=ok:0
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=255,c=3,t=24,pt=1,l=1,sg=0:1
0;255;3;0;9;TSP:MSG:PINGED (ID=1, hops=1)
0;255;3;0;9;TSP:MSG:SEND 0-0-1-1 s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=ok:1
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=255,c=3,t=15,pt=6,l=2,sg=0:0100
0;255;3;0;9;TSP:MSG:SEND 0-0-1-1 s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=ok:0100
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=255,c=0,t=17,pt=0,l=5,sg=0:2.0.0
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=255,c=3,t=11,pt=0,l=22,sg=0:TemperatureAndHumidity
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.1
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=0,c=0,t=7,pt=0,l=0,sg=0:
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=1,c=0,t=6,pt=0,l=0,sg=0:
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=255,c=3,t=26,pt=1,l=1,sg=0:2
0;255;3;0;9;TSP:MSG:SEND 0-0-1-1 s=255,c=3,t=27,pt=1,l=1,sg=0,ft=0,st=ok:1
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=1,c=1,t=0,pt=7,l=5,sg=0:20.0
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=0,c=1,t=1,pt=7,l=5,sg=0:46.7
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=1,c=1,t=0,pt=7,l=5,sg=0:19.9
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=0,c=1,t=1,pt=7,l=5,sg=0:46.6
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:MSG:READ 1-1-0 s=0,c=1,t=1,pt=7,l=5,sg=0:46.5
The node was switched on all the time. There is a row of "0;255;3;0;9;TSP:SANCHK:OK".
Then I switched the node of and on again. Now came other infos and I can see the temperatur and the humidity, but not before I switchesd off and on.
Strange.
In IObroker there is nothin to be seen.
Perhaps I use the wrong (chnages wrong?) sketch. Ha sanybody a sketch for the gateaway that runs better?
Thank You in advance