!TSM:CHKID:FAIL (ID=255)
-
I am getting this error message "!TSM:CHKID:FAIL (ID=255)". It looks like the gateway and node are trying to communicate with each other and I have add a capacitor to each unit. I have tried switch radios/units, but no luck. Any help would be appreciated.
-
@jmmorgan83 welcome to the MySensors community!
Id 255 is reserved.
Assign another id to the node.
-
I thought that node id is auto obtained from the gateway. How do I assign the node ID?
-
@jmmorgan83 gateways do not assign node ids. Node ids can be assigned by a controller or by defining MY_NODE_ID in the sketch.
-
Great! That worked. I was just trying to get it to work between the node and gateway, and the motion example didn't have the MY_NODE_ID in the example.
1 out of 5
Suggested Topics
-
Day 1 - Status report
Announcements • 23 Mar 2014, 22:45 • hek 24 Mar 2014, 20:12 -
Can not compile MySensors on esp8266
Troubleshooting • 24 Aug 2024, 15:35 • TheoL 29 Aug 2024, 20:47 -
Echo request is not set
Troubleshooting • 12 Aug 2024, 15:36 • kamilb85 3 Sept 2024, 08:58 -
Forum Search not working?
Troubleshooting • 4 Oct 2023, 23:33 • Gibber 2 Sept 2024, 20:28 -
Getting system time from the controller
Troubleshooting • 27 Feb 2025, 01:39 • dpcons 3 Mar 2025, 01:00 -
Raspberry Pi 5: invalid GPIO 9
Troubleshooting • 27 Aug 2024, 13:20 • igo 27 Aug 2024, 13:20
