[solved] Sensor missing after restart
-
After restarting Home Assistant, my motion and light sensors do not show up until they send values again. They are being correctly saved on the persistence .json file, so I expected them to show up.
-
After restarting Home Assistant, my motion and light sensors do not show up until they send values again. They are being correctly saved on the persistence .json file, so I expected them to show up.
What version of home assistant are you using? There was an issue in 0.33 that lead to the behavior you've reported here.
-
Have you followed the recommendation in the documentation to send an initial value to the controller? The symptom you're describing sounds as if that may not be the case.
@exxamalte The sensor appears correctly after sending values. Also, the .json file is correctly filled with the sensor data.
@martinhjelmare Well, I'm using 0.33.4! I'll try updating and report back :) Thanks.
-
What version of home assistant are you using? There was an issue in 0.33 that lead to the behavior you've reported here.
@martinhjelmare I just updated to the latest version and now they appear correctly after rebooting! Thank you very much.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login