MQTT raspberry pi gateway with HA, can't seem to find sensors.

[kostaa]

This post is deleted!

[kostaa]

This post is deleted!

[martinhjelmare]

Please don't post sensitive information, like passwords and URL to your host. Sorry if I was not clear. You should change your password now.

I'd just like to see a log with default info level so I can see that all mysensors platforms are setup ok after start. Then you can also restart the arduino sensor after starting home assistant, so that we can see what happens when the sensor runs through presentation etc.

[kostaa]

@martinhjelmare said:
Thank you for the warning :)
Config directory: /home/pi/.homeassistant
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: service=turn_off, domain=homeassistant>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: service=turn_on, domain=homeassistant>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: service=toggle, domain=homeassistant>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: service=reload_core_config, domain=homeassistant>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: service=create, domain=persistent_notification>
INFO:homeassistant.bootstrap:Home Assistant core initialized
INFO:homeassistant.loader:Loaded discovery from homeassistant.components.discovery
INFO:homeassistant.loader:Loaded conversation from homeassistant.components.conversation
INFO:homeassistant.loader:Loaded http from homeassistant.components.http
INFO:homeassistant.loader:Loaded tts from homeassistant.components.tts
INFO:homeassistant.loader:Loaded logbook from homeassistant.components.logbook
INFO:homeassistant.loader:Loaded recorder from homeassistant.components.recorder
INFO:homeassistant.loader:Loaded frontend from homeassistant.components.frontend
INFO:homeassistant.loader:Loaded api from homeassistant.components.api
INFO:homeassistant.loader:Loaded websocket_api from homeassistant.components.websocket_api
INFO:homeassistant.loader:Loaded sensor from homeassistant.components.sensor
INFO:homeassistant.loader:Loaded updater from homeassistant.components.updater
INFO:homeassistant.loader:Loaded sun from homeassistant.components.sun
INFO:homeassistant.loader:Loaded mqtt from homeassistant.components.mqtt
INFO:homeassistant.loader:Loaded logger from homeassistant.components.logger
INFO:homeassistant.loader:Loaded history from homeassistant.components.history
INFO:homeassistant.loader:Loaded mysensors from homeassistant.components.mysensors
INFO:homeassistant.bootstrap:Setting up recorder
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=recorder>
INFO:homeassistant.bootstrap:Setting up logger
DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/1/4/1/+/+
DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/1/4/2/+/+
DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/1/+/4/+/+
INFO:mysensors.mysensors:Setting up initial MQTT topic subscription
DEBUG:homeassistant.components.mysensors:Update persistence: node 1
DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/+/+/0/+/+
DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/+/+/3/+/+
DEBUG:mysensors.mysensors:Receiving 1;255;3;0;12;1.0
DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
DEBUG:mysensors.mysensors:Receiving 1;4;0;0;7;
WARNING:mysensors.mysensors:child_id 4 already exists in children of node 1, cannot add child
DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;1
DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;15
DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;1
DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;-8
DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;1
DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;7
DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;2
DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;1
DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;6
DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;-2
DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;1
DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;

[martinhjelmare]

Please check that logger component has info as default level in your home assistant config, as in my latest example above. We're missing expected lines about setup after logger component is loaded.

[kostaa]

pi@pi3:~/.homeassistant $ hass
Config directory: /home/pi/.homeassistant
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=turn_off>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=turn_on>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=toggle>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=reload_core_config>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=persistent_notification, service=create>
INFO:homeassistant.bootstrap:Home Assistant core initialized
INFO:homeassistant.loader:Loaded tts from homeassistant.components.tts
INFO:homeassistant.loader:Loaded http from homeassistant.components.http
INFO:homeassistant.loader:Loaded logger from homeassistant.components.logger
INFO:homeassistant.loader:Loaded discovery from homeassistant.components.discovery
INFO:homeassistant.loader:Loaded logbook from homeassistant.components.logbook
INFO:homeassistant.loader:Loaded recorder from homeassistant.components.recorder
INFO:homeassistant.loader:Loaded frontend from homeassistant.components.frontend
INFO:homeassistant.loader:Loaded api from homeassistant.components.api
INFO:homeassistant.loader:Loaded websocket_api from homeassistant.components.websocket_api
INFO:homeassistant.loader:Loaded conversation from homeassistant.components.conversation
INFO:homeassistant.loader:Loaded mysensors from homeassistant.components.mysensors
INFO:homeassistant.loader:Loaded updater from homeassistant.components.updater
INFO:homeassistant.loader:Loaded sensor from homeassistant.components.sensor
INFO:homeassistant.loader:Loaded mqtt from homeassistant.components.mqtt
INFO:homeassistant.loader:Loaded history from homeassistant.components.history
INFO:homeassistant.loader:Loaded sun from homeassistant.components.sun
INFO:homeassistant.bootstrap:Setting up recorder
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=recorder>
INFO:homeassistant.bootstrap:Setting up logger
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=logger>
INFO:homeassistant.bootstrap:Setting up http
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=http>
INFO:homeassistant.loader:Loaded tts.google from homeassistant.components.tts.google
INFO:homeassistant.bootstrap:Setting up tts
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=tts, service=google_say>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=tts, service=clear_cache>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=tts>
INFO:homeassistant.bootstrap:Setting up discovery
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=discovery>
INFO:homeassistant.bootstrap:Setting up api
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=api>
INFO:homeassistant.bootstrap:Setting up websocket_api
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=websocket_api>
INFO:homeassistant.bootstrap:Setting up frontend
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=frontend>
INFO:homeassistant.bootstrap:Setting up logbook
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=logbook, service=log>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=logbook>
INFO:homeassistant.bootstrap:Setting up conversation
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=conversation, service=process>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=conversation>
INFO:homeassistant.bootstrap:Setting up mysensors
INFO:homeassistant.bootstrap:Setting up mqtt
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=mqtt, service=publish>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=mqtt>
DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/1/4/1/+/+
DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/1/4/2/+/+
DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/1/+/4/+/+
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=mysensors>
INFO:homeassistant.bootstrap:Setting up updater
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=updater>
INFO:homeassistant.loader:Loaded sensor.yr from homeassistant.components.sensor.yr
INFO:homeassistant.bootstrap:Setting up sensor
INFO:homeassistant.components.sensor:Setting up sensor.yr
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sensor.yr_symbol=unknown; attribution=Weather forecast from yr.no, delivered by the Norwegian Meteorological Institute and the NRK., entity_picture=//api.met.no/weatherapi/weathericon/1.1/?symbol=None;content_type=image/png, friendly_name=yr Symbol @ 2016-12-28T00:18:50.127080-05:00>, old_state=None, entity_id=sensor.yr_symbol>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sensor.yr_symbol=1; attribution=Weather forecast from yr.no, delivered by the Norwegian Meteorological Institute and the NRK., entity_picture=//api.met.no/weatherapi/weathericon/1.1/?symbol=1;content_type=image/png, friendly_name=yr Symbol @ 2016-12-28T00:18:51.077805-05:00>, old_state=<state sensor.yr_symbol=unknown; attribution=Weather forecast from yr.no, delivered by the Norwegian Meteorological Institute and the NRK., entity_picture=//api.met.no/weatherapi/weathericon/1.1/?symbol=None;content_type=image/png, friendly_name=yr Symbol @ 2016-12-28T00:18:50.127080-05:00>, entity_id=sensor.yr_symbol>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=sensor>
INFO:homeassistant.bootstrap:Setting up history
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=history>
INFO:homeassistant.bootstrap:Setting up sun
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=below_horizon; friendly_name=Sun, azimuth=0, next_setting=2016-12-28T22:35:27+00:00, elevation=0, next_rising=2016-12-28T12:41:37+00:00 @ 2016-12-28T00:18:51.192205-05:00>, old_state=None, entity_id=sun.sun>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=sun>
INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: platform=mysensors, service=load_platform.sensor, discovered=>
INFO:homeassistant.loader:Loaded switch from homeassistant.components.switch
INFO:homeassistant.loader:Loaded sensor.mysensors from homeassistant.components.sensor.mysensors
INFO:homeassistant.bootstrap:Setting up switch
INFO:homeassistant.components.sensor:Setting up sensor.mysensors
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch, service=turn_off>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch, service=turn_on>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch, service=toggle>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=switch>
INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: platform=mysensors, service=load_platform.switch, discovered=>
INFO:homeassistant.loader:Loaded light from homeassistant.components.light
INFO:homeassistant.loader:Loaded switch.mysensors from homeassistant.components.switch.mysensors
INFO:homeassistant.bootstrap:Setting up light
INFO:homeassistant.components.switch:Setting up switch.mysensors
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch, service=mysensors_send_ir_code>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=light, service=turn_on>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=light, service=turn_off>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=light, service=toggle>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=light>
INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: platform=mysensors, service=load_platform.light, discovered=>
INFO:homeassistant.loader:Loaded binary_sensor from homeassistant.components.binary_sensor
INFO:homeassistant.loader:Loaded light.mysensors from homeassistant.components.light.mysensors
INFO:homeassistant.bootstrap:Setting up binary_sensor
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=binary_sensor>
INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: platform=mysensors, service=load_platform.binary_sensor, discovered=>
INFO:homeassistant.loader:Loaded climate from homeassistant.components.climate
INFO:homeassistant.components.light:Setting up light.mysensors
INFO:homeassistant.loader:Loaded binary_sensor.mysensors from homeassistant.components.binary_sensor.mysensors
INFO:homeassistant.bootstrap:Setting up climate
INFO:homeassistant.components.binary_sensor:Setting up binary_sensor.mysensors
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=climate, service=set_away_mode>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=climate, service=set_aux_heat>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=climate, service=set_temperature>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=climate, service=set_humidity>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=climate, service=set_fan_mode>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=climate, service=set_operation_mode>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=climate, service=set_swing_mode>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=climate>
INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: platform=mysensors, service=load_platform.climate, discovered=>
INFO:homeassistant.loader:Loaded cover from homeassistant.components.cover
INFO:homeassistant.loader:Loaded climate.mysensors from homeassistant.components.climate.mysensors
INFO:homeassistant.bootstrap:Setting up cover
INFO:homeassistant.components.climate:Setting up climate.mysensors
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=set_cover_position>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=close_cover>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=open_cover_tilt>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=set_cover_tilt_position>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=stop_cover_tilt>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=close_cover_tilt>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=open_cover>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=stop_cover>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=cover>
INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: platform=mysensors, service=load_platform.cover, discovered=>
INFO:homeassistant.loader:Loaded cover.mysensors from homeassistant.components.cover.mysensors
INFO:homeassistant.components.cover:Setting up cover.mysensors
INFO:homeassistant.core:Starting Home Assistant core loop
INFO:homeassistant.core:Starting Home Assistant
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=stop>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=restart>
INFO:homeassistant.core:Bus:Handling <Event homeassistant_start[L]>
INFO:mysensors.mysensors:Setting up initial MQTT topic subscription
DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/+/+/0/+/+
INFO:homeassistant.core:Timer:starting
DEBUG:homeassistant.components.mysensors:Update persistence: node 1
DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/+/+/3/+/+
INFO:homeassistant.core:Bus:Handling <Event mqtt_message_received[L]: payload=4, qos=0, topic=mysensors-out/1/4/1/0/37>
DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;4
DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
INFO:netdisco.service:Scanning
INFO:homeassistant.components.http:Serving /api/websocket to 192.168.1.1 (auth: False)
INFO:homeassistant.components.http:Serving /api/bootstrap to 192.168.1.1 (auth: True)
INFO:homeassistant.core:Bus:Handling <Event mqtt_message_received[L]: payload=, qos=0, topic=mysensors-out/1/4/0/0/7>
DEBUG:mysensors.mysensors:Receiving 1;4;0;0;7;
WARNING:mysensors.mysensors:child_id 4 already exists in children of node 1, cannot add child
INFO:homeassistant.core:Bus:Handling <Event mqtt_message_received[L]: payload=, qos=0, topic=mysensors-out/1/4/2/0/2>
DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=below_horizon; friendly_name=Sun, azimuth=338.22, next_setting=2016-12-28T22:35:27+00:00, elevation=-78.36, next_rising=2016-12-28T12:41:37+00:00 @ 2016-12-28T00:18:51.192205-05:00>, old_state=<state sun.sun=below_horizon; friendly_name=Sun, azimuth=0, next_setting=2016-12-28T22:35:27+00:00, elevation=0, next_rising=2016-12-28T12:41:37+00:00 @ 2016-12-28T00:18:51.192205-05:00>, entity_id=sun.sun>
INFO:homeassistant.core:Bus:Handling <Event mqtt_message_received[L]: payload=0, qos=0, topic=mysensors-out/1/4/1/0/37>
DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;0
DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
INFO:homeassistant.core:Bus:Handling <Event mqtt_message_received[L]: payload=1, qos=0, topic=mysensors-out/1/4/1/0/37>
DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;1
DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
INFO:homeassistant.core:Bus:Handling <Event mqtt_message_received[L]: payload=, qos=0, topic=mysensors-out/1/4/2/0/2>
DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
INFO:homeassistant.core:Bus:Handling <Event mqtt_message_received[L]: payload=0, qos=0, topic=mysensors-out/1/255/3/0/21>
DEBUG:mysensors.mysensors:Receiving 1;255;3;0;21;0

[martinhjelmare]

I think I see a problem with your sensor value type that is used. You have presented a humidity sensor (7), but you report with a level type (37). You should use subtype 1 when setting the value of the humidity child sensor. Sorry for not noticing this from the beginning.

Home assistant is picky about child/value combinations. You can see allowed types in the docs for mysensors at home-assistant.io.

Specifically here:
https://home-assistant.io/components/sensor.mysensors/

[kostaa]

Thank you so much, and I am sorry I am a complete noob at this, where is the level type and subtype set? I searched on this page
and found very little.
https://home-assistant.io/components/mysensors/

[martinhjelmare]

See this:
https://home-assistant.io/components/sensor.mysensors/

And also this:
https://www.mysensors.org/download/serial_api_20

Usually you decide in the beginning of your sensor sketch what message type you will use when reporting values. Alternatively this can be done dynamically before sending the value. Look at the example sketch for humidity sensor here:
https://www.mysensors.org/build/humidity

[kostaa]

@martinhjelmare
Thank you!
Ok so in the beginning of the default sketch in here:
https://www.mysensors.org/build/moisture
The line :
MyMessage msg(CHILD_ID, V_LEVEL);
Is the problem
It should be:
MyMessage msg(CHILD_ID, V_HUM);
You were absolutely right.
Thank you for being so quick and amazing, and if you can please ask someone to fix the example.

[martinhjelmare]

No problem, glad to help!

Actually the moisture sensor should be presented as S_MOISTURE. The message type V_LEVEL is correct for the moisture sensor. :smile:

[kostaa]

@martinhjelmare
Then this is a problem?
void presentation()
{
sendSketchInfo("Soil Moisture Sensor Reverse Polarity", "1.0");
present(CHILD_ID, S_HUM);
}

[martinhjelmare]

Yes, exactly. Change S_HUM to S_MOISTURE.

[kostaa]

@martinhjelmare Yep, it is still from the sample :) Thank you so much again.

[kostaa]

@martinhjelmare Just discovered mysensors, it is pure awesomeness.