Skip to content
  • MySensors
  • OpenHardware.io
  • Categories
  • Recent
  • Tags
  • Popular
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Default (No Skin)
  • No Skin
Collapse
Brand Logo
  1. Home
  2. Controllers
  3. Home Assistant
  4. MQTT raspberry pi gateway with HA, can't seem to find sensors.

MQTT raspberry pi gateway with HA, can't seem to find sensors.

Scheduled Pinned Locked Moved Home Assistant
22 Posts 2 Posters 5.8k Views 2 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • martinhjelmareM martinhjelmare

    I'd like to see mysensors platform setup too, sorry.

    logger:
      default: info
      logs:
        homeassistant.components.mqtt: info
        homeassistant.components.mysensors: debug
        mysensors.mysensors: debug
    
    mysensors:
      debug: true
    ...
    
    kostaaK Offline
    kostaaK Offline
    kostaa
    wrote on last edited by kostaa
    #9
    This post is deleted!
    1 Reply Last reply
    0
    • martinhjelmareM Offline
      martinhjelmareM Offline
      martinhjelmare
      Plugin Developer
      wrote on last edited by
      #10

      Please don't post sensitive information, like passwords and URL to your host. Sorry if I was not clear. You should change your password now.

      I'd just like to see a log with default info level so I can see that all mysensors platforms are setup ok after start. Then you can also restart the arduino sensor after starting home assistant, so that we can see what happens when the sensor runs through presentation etc.

      1 Reply Last reply
      0
      • kostaaK Offline
        kostaaK Offline
        kostaa
        wrote on last edited by
        #11

        @martinhjelmare said:
        Thank you for the warning :)
        Config directory: /home/pi/.homeassistant
        INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: service=turn_off, domain=homeassistant>
        INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: service=turn_on, domain=homeassistant>
        INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: service=toggle, domain=homeassistant>
        INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: service=reload_core_config, domain=homeassistant>
        INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: service=create, domain=persistent_notification>
        INFO:homeassistant.bootstrap:Home Assistant core initialized
        INFO:homeassistant.loader:Loaded discovery from homeassistant.components.discovery
        INFO:homeassistant.loader:Loaded conversation from homeassistant.components.conversation
        INFO:homeassistant.loader:Loaded http from homeassistant.components.http
        INFO:homeassistant.loader:Loaded tts from homeassistant.components.tts
        INFO:homeassistant.loader:Loaded logbook from homeassistant.components.logbook
        INFO:homeassistant.loader:Loaded recorder from homeassistant.components.recorder
        INFO:homeassistant.loader:Loaded frontend from homeassistant.components.frontend
        INFO:homeassistant.loader:Loaded api from homeassistant.components.api
        INFO:homeassistant.loader:Loaded websocket_api from homeassistant.components.websocket_api
        INFO:homeassistant.loader:Loaded sensor from homeassistant.components.sensor
        INFO:homeassistant.loader:Loaded updater from homeassistant.components.updater
        INFO:homeassistant.loader:Loaded sun from homeassistant.components.sun
        INFO:homeassistant.loader:Loaded mqtt from homeassistant.components.mqtt
        INFO:homeassistant.loader:Loaded logger from homeassistant.components.logger
        INFO:homeassistant.loader:Loaded history from homeassistant.components.history
        INFO:homeassistant.loader:Loaded mysensors from homeassistant.components.mysensors
        INFO:homeassistant.bootstrap:Setting up recorder
        INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=recorder>
        INFO:homeassistant.bootstrap:Setting up logger
        DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/1/4/1/+/+
        DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/1/4/2/+/+
        DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/1/+/4/+/+
        INFO:mysensors.mysensors:Setting up initial MQTT topic subscription
        DEBUG:homeassistant.components.mysensors:Update persistence: node 1
        DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/+/+/0/+/+
        DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/+/+/3/+/+
        DEBUG:mysensors.mysensors:Receiving 1;255;3;0;12;1.0
        DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
        DEBUG:mysensors.mysensors:Receiving 1;4;0;0;7;
        WARNING:mysensors.mysensors:child_id 4 already exists in children of node 1, cannot add child
        DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;1
        DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
        DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
        DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;15
        DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
        DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;1
        DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
        DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
        DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
        DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;-8
        DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
        DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;1
        DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
        DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
        DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;7
        DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
        DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
        DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;2
        DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
        DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;1
        DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
        DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
        DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;6
        DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
        DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
        DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;-2
        DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
        DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;1
        DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
        DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
        DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
        DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;

        1 Reply Last reply
        0
        • martinhjelmareM Offline
          martinhjelmareM Offline
          martinhjelmare
          Plugin Developer
          wrote on last edited by
          #12

          Please check that logger component has info as default level in your home assistant config, as in my latest example above. We're missing expected lines about setup after logger component is loaded.

          kostaaK 1 Reply Last reply
          0
          • martinhjelmareM martinhjelmare

            Please check that logger component has info as default level in your home assistant config, as in my latest example above. We're missing expected lines about setup after logger component is loaded.

            kostaaK Offline
            kostaaK Offline
            kostaa
            wrote on last edited by
            #13

            pi@pi3:~/.homeassistant $ hass
            Config directory: /home/pi/.homeassistant
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=turn_off>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=turn_on>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=toggle>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=reload_core_config>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=persistent_notification, service=create>
            INFO:homeassistant.bootstrap:Home Assistant core initialized
            INFO:homeassistant.loader:Loaded tts from homeassistant.components.tts
            INFO:homeassistant.loader:Loaded http from homeassistant.components.http
            INFO:homeassistant.loader:Loaded logger from homeassistant.components.logger
            INFO:homeassistant.loader:Loaded discovery from homeassistant.components.discovery
            INFO:homeassistant.loader:Loaded logbook from homeassistant.components.logbook
            INFO:homeassistant.loader:Loaded recorder from homeassistant.components.recorder
            INFO:homeassistant.loader:Loaded frontend from homeassistant.components.frontend
            INFO:homeassistant.loader:Loaded api from homeassistant.components.api
            INFO:homeassistant.loader:Loaded websocket_api from homeassistant.components.websocket_api
            INFO:homeassistant.loader:Loaded conversation from homeassistant.components.conversation
            INFO:homeassistant.loader:Loaded mysensors from homeassistant.components.mysensors
            INFO:homeassistant.loader:Loaded updater from homeassistant.components.updater
            INFO:homeassistant.loader:Loaded sensor from homeassistant.components.sensor
            INFO:homeassistant.loader:Loaded mqtt from homeassistant.components.mqtt
            INFO:homeassistant.loader:Loaded history from homeassistant.components.history
            INFO:homeassistant.loader:Loaded sun from homeassistant.components.sun
            INFO:homeassistant.bootstrap:Setting up recorder
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=recorder>
            INFO:homeassistant.bootstrap:Setting up logger
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=logger>
            INFO:homeassistant.bootstrap:Setting up http
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=http>
            INFO:homeassistant.loader:Loaded tts.google from homeassistant.components.tts.google
            INFO:homeassistant.bootstrap:Setting up tts
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=tts, service=google_say>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=tts, service=clear_cache>
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=tts>
            INFO:homeassistant.bootstrap:Setting up discovery
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=discovery>
            INFO:homeassistant.bootstrap:Setting up api
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=api>
            INFO:homeassistant.bootstrap:Setting up websocket_api
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=websocket_api>
            INFO:homeassistant.bootstrap:Setting up frontend
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=frontend>
            INFO:homeassistant.bootstrap:Setting up logbook
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=logbook, service=log>
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=logbook>
            INFO:homeassistant.bootstrap:Setting up conversation
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=conversation, service=process>
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=conversation>
            INFO:homeassistant.bootstrap:Setting up mysensors
            INFO:homeassistant.bootstrap:Setting up mqtt
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=mqtt, service=publish>
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=mqtt>
            DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/1/4/1/+/+
            DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/1/4/2/+/+
            DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/1/+/4/+/+
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=mysensors>
            INFO:homeassistant.bootstrap:Setting up updater
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=updater>
            INFO:homeassistant.loader:Loaded sensor.yr from homeassistant.components.sensor.yr
            INFO:homeassistant.bootstrap:Setting up sensor
            INFO:homeassistant.components.sensor:Setting up sensor.yr
            INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sensor.yr_symbol=unknown; attribution=Weather forecast from yr.no, delivered by the Norwegian Meteorological Institute and the NRK., entity_picture=//api.met.no/weatherapi/weathericon/1.1/?symbol=None;content_type=image/png, friendly_name=yr Symbol @ 2016-12-28T00:18:50.127080-05:00>, old_state=None, entity_id=sensor.yr_symbol>
            INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sensor.yr_symbol=1; attribution=Weather forecast from yr.no, delivered by the Norwegian Meteorological Institute and the NRK., entity_picture=//api.met.no/weatherapi/weathericon/1.1/?symbol=1;content_type=image/png, friendly_name=yr Symbol @ 2016-12-28T00:18:51.077805-05:00>, old_state=<state sensor.yr_symbol=unknown; attribution=Weather forecast from yr.no, delivered by the Norwegian Meteorological Institute and the NRK., entity_picture=//api.met.no/weatherapi/weathericon/1.1/?symbol=None;content_type=image/png, friendly_name=yr Symbol @ 2016-12-28T00:18:50.127080-05:00>, entity_id=sensor.yr_symbol>
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=sensor>
            INFO:homeassistant.bootstrap:Setting up history
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=history>
            INFO:homeassistant.bootstrap:Setting up sun
            INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=below_horizon; friendly_name=Sun, azimuth=0, next_setting=2016-12-28T22:35:27+00:00, elevation=0, next_rising=2016-12-28T12:41:37+00:00 @ 2016-12-28T00:18:51.192205-05:00>, old_state=None, entity_id=sun.sun>
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=sun>
            INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: platform=mysensors, service=load_platform.sensor, discovered=>
            INFO:homeassistant.loader:Loaded switch from homeassistant.components.switch
            INFO:homeassistant.loader:Loaded sensor.mysensors from homeassistant.components.sensor.mysensors
            INFO:homeassistant.bootstrap:Setting up switch
            INFO:homeassistant.components.sensor:Setting up sensor.mysensors
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch, service=turn_off>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch, service=turn_on>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch, service=toggle>
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=switch>
            INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: platform=mysensors, service=load_platform.switch, discovered=>
            INFO:homeassistant.loader:Loaded light from homeassistant.components.light
            INFO:homeassistant.loader:Loaded switch.mysensors from homeassistant.components.switch.mysensors
            INFO:homeassistant.bootstrap:Setting up light
            INFO:homeassistant.components.switch:Setting up switch.mysensors
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch, service=mysensors_send_ir_code>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=light, service=turn_on>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=light, service=turn_off>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=light, service=toggle>
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=light>
            INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: platform=mysensors, service=load_platform.light, discovered=>
            INFO:homeassistant.loader:Loaded binary_sensor from homeassistant.components.binary_sensor
            INFO:homeassistant.loader:Loaded light.mysensors from homeassistant.components.light.mysensors
            INFO:homeassistant.bootstrap:Setting up binary_sensor
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=binary_sensor>
            INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: platform=mysensors, service=load_platform.binary_sensor, discovered=>
            INFO:homeassistant.loader:Loaded climate from homeassistant.components.climate
            INFO:homeassistant.components.light:Setting up light.mysensors
            INFO:homeassistant.loader:Loaded binary_sensor.mysensors from homeassistant.components.binary_sensor.mysensors
            INFO:homeassistant.bootstrap:Setting up climate
            INFO:homeassistant.components.binary_sensor:Setting up binary_sensor.mysensors
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=climate, service=set_away_mode>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=climate, service=set_aux_heat>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=climate, service=set_temperature>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=climate, service=set_humidity>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=climate, service=set_fan_mode>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=climate, service=set_operation_mode>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=climate, service=set_swing_mode>
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=climate>
            INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: platform=mysensors, service=load_platform.climate, discovered=>
            INFO:homeassistant.loader:Loaded cover from homeassistant.components.cover
            INFO:homeassistant.loader:Loaded climate.mysensors from homeassistant.components.climate.mysensors
            INFO:homeassistant.bootstrap:Setting up cover
            INFO:homeassistant.components.climate:Setting up climate.mysensors
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=set_cover_position>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=close_cover>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=open_cover_tilt>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=set_cover_tilt_position>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=stop_cover_tilt>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=close_cover_tilt>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=open_cover>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=cover, service=stop_cover>
            INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=cover>
            INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: platform=mysensors, service=load_platform.cover, discovered=>
            INFO:homeassistant.loader:Loaded cover.mysensors from homeassistant.components.cover.mysensors
            INFO:homeassistant.components.cover:Setting up cover.mysensors
            INFO:homeassistant.core:Starting Home Assistant core loop
            INFO:homeassistant.core:Starting Home Assistant
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=stop>
            INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=restart>
            INFO:homeassistant.core:Bus:Handling <Event homeassistant_start[L]>
            INFO:mysensors.mysensors:Setting up initial MQTT topic subscription
            DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/+/+/0/+/+
            INFO:homeassistant.core:Timer:starting
            DEBUG:homeassistant.components.mysensors:Update persistence: node 1
            DEBUG:mysensors.mysensors:Subscribing to: mysensors-out/+/+/3/+/+
            INFO:homeassistant.core:Bus:Handling <Event mqtt_message_received[L]: payload=4, qos=0, topic=mysensors-out/1/4/1/0/37>
            DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;4
            DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
            INFO:netdisco.service:Scanning
            INFO:homeassistant.components.http:Serving /api/websocket to 192.168.1.1 (auth: False)
            INFO:homeassistant.components.http:Serving /api/bootstrap to 192.168.1.1 (auth: True)
            INFO:homeassistant.core:Bus:Handling <Event mqtt_message_received[L]: payload=, qos=0, topic=mysensors-out/1/4/0/0/7>
            DEBUG:mysensors.mysensors:Receiving 1;4;0;0;7;
            WARNING:mysensors.mysensors:child_id 4 already exists in children of node 1, cannot add child
            INFO:homeassistant.core:Bus:Handling <Event mqtt_message_received[L]: payload=, qos=0, topic=mysensors-out/1/4/2/0/2>
            DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
            INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=below_horizon; friendly_name=Sun, azimuth=338.22, next_setting=2016-12-28T22:35:27+00:00, elevation=-78.36, next_rising=2016-12-28T12:41:37+00:00 @ 2016-12-28T00:18:51.192205-05:00>, old_state=<state sun.sun=below_horizon; friendly_name=Sun, azimuth=0, next_setting=2016-12-28T22:35:27+00:00, elevation=0, next_rising=2016-12-28T12:41:37+00:00 @ 2016-12-28T00:18:51.192205-05:00>, entity_id=sun.sun>
            INFO:homeassistant.core:Bus:Handling <Event mqtt_message_received[L]: payload=0, qos=0, topic=mysensors-out/1/4/1/0/37>
            DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;0
            DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
            INFO:homeassistant.core:Bus:Handling <Event mqtt_message_received[L]: payload=1, qos=0, topic=mysensors-out/1/4/1/0/37>
            DEBUG:mysensors.mysensors:Receiving 1;4;1;0;37;1
            DEBUG:homeassistant.components.mysensors:Update sensor_update: node 1
            INFO:homeassistant.core:Bus:Handling <Event mqtt_message_received[L]: payload=, qos=0, topic=mysensors-out/1/4/2/0/2>
            DEBUG:mysensors.mysensors:Receiving 1;4;2;0;2;
            INFO:homeassistant.core:Bus:Handling <Event mqtt_message_received[L]: payload=0, qos=0, topic=mysensors-out/1/255/3/0/21>
            DEBUG:mysensors.mysensors:Receiving 1;255;3;0;21;0

            1 Reply Last reply
            0
            • martinhjelmareM Offline
              martinhjelmareM Offline
              martinhjelmare
              Plugin Developer
              wrote on last edited by martinhjelmare
              #14

              I think I see a problem with your sensor value type that is used. You have presented a humidity sensor (7), but you report with a level type (37). You should use subtype 1 when setting the value of the humidity child sensor. Sorry for not noticing this from the beginning.

              Home assistant is picky about child/value combinations. You can see allowed types in the docs for mysensors at home-assistant.io.

              Specifically here:
              https://home-assistant.io/components/sensor.mysensors/

              1 Reply Last reply
              1
              • kostaaK Offline
                kostaaK Offline
                kostaa
                wrote on last edited by
                #15

                Thank you so much, and I am sorry I am a complete noob at this, where is the level type and subtype set? I searched on this page
                and found very little.
                https://home-assistant.io/components/mysensors/

                1 Reply Last reply
                0
                • martinhjelmareM Offline
                  martinhjelmareM Offline
                  martinhjelmare
                  Plugin Developer
                  wrote on last edited by
                  #16

                  See this:
                  https://home-assistant.io/components/sensor.mysensors/

                  And also this:
                  https://www.mysensors.org/download/serial_api_20

                  Usually you decide in the beginning of your sensor sketch what message type you will use when reporting values. Alternatively this can be done dynamically before sending the value. Look at the example sketch for humidity sensor here:
                  https://www.mysensors.org/build/humidity

                  kostaaK 1 Reply Last reply
                  1
                  • martinhjelmareM martinhjelmare

                    See this:
                    https://home-assistant.io/components/sensor.mysensors/

                    And also this:
                    https://www.mysensors.org/download/serial_api_20

                    Usually you decide in the beginning of your sensor sketch what message type you will use when reporting values. Alternatively this can be done dynamically before sending the value. Look at the example sketch for humidity sensor here:
                    https://www.mysensors.org/build/humidity

                    kostaaK Offline
                    kostaaK Offline
                    kostaa
                    wrote on last edited by
                    #17

                    @martinhjelmare
                    Thank you!
                    Ok so in the beginning of the default sketch in here:
                    https://www.mysensors.org/build/moisture
                    The line :
                    MyMessage msg(CHILD_ID, V_LEVEL);
                    Is the problem
                    It should be:
                    MyMessage msg(CHILD_ID, V_HUM);
                    You were absolutely right.
                    Thank you for being so quick and amazing, and if you can please ask someone to fix the example.

                    1 Reply Last reply
                    0
                    • martinhjelmareM Offline
                      martinhjelmareM Offline
                      martinhjelmare
                      Plugin Developer
                      wrote on last edited by
                      #18

                      No problem, glad to help!

                      Actually the moisture sensor should be presented as S_MOISTURE. The message type V_LEVEL is correct for the moisture sensor. :smile:

                      kostaaK 1 Reply Last reply
                      0
                      • martinhjelmareM martinhjelmare

                        No problem, glad to help!

                        Actually the moisture sensor should be presented as S_MOISTURE. The message type V_LEVEL is correct for the moisture sensor. :smile:

                        kostaaK Offline
                        kostaaK Offline
                        kostaa
                        wrote on last edited by
                        #19

                        @martinhjelmare
                        Then this is a problem?
                        void presentation()
                        {
                        sendSketchInfo("Soil Moisture Sensor Reverse Polarity", "1.0");
                        present(CHILD_ID, S_HUM);
                        }

                        1 Reply Last reply
                        1
                        • martinhjelmareM Offline
                          martinhjelmareM Offline
                          martinhjelmare
                          Plugin Developer
                          wrote on last edited by
                          #20

                          Yes, exactly. Change S_HUM to S_MOISTURE.

                          kostaaK 2 Replies Last reply
                          0
                          • martinhjelmareM martinhjelmare

                            Yes, exactly. Change S_HUM to S_MOISTURE.

                            kostaaK Offline
                            kostaaK Offline
                            kostaa
                            wrote on last edited by
                            #21

                            @martinhjelmare Yep, it is still from the sample :) Thank you so much again.

                            1 Reply Last reply
                            1
                            • martinhjelmareM martinhjelmare

                              Yes, exactly. Change S_HUM to S_MOISTURE.

                              kostaaK Offline
                              kostaaK Offline
                              kostaa
                              wrote on last edited by
                              #22

                              @martinhjelmare Just discovered mysensors, it is pure awesomeness.

                              1 Reply Last reply
                              0
                              Reply
                              • Reply as topic
                              Log in to reply
                              • Oldest to Newest
                              • Newest to Oldest
                              • Most Votes


                              11

                              Online

                              11.7k

                              Users

                              11.2k

                              Topics

                              113.1k

                              Posts


                              Copyright 2025 TBD   |   Forum Guidelines   |   Privacy Policy   |   Terms of Service
                              • Login

                              • Don't have an account? Register

                              • Login or register to search.
                              • First post
                                Last post
                              0
                              • MySensors
                              • OpenHardware.io
                              • Categories
                              • Recent
                              • Tags
                              • Popular