Skip to content
  • MySensors
  • OpenHardware.io
  • Categories
  • Recent
  • Tags
  • Popular
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Default (No Skin)
  • No Skin
Collapse
Brand Logo
  1. Home
  2. Troubleshooting
  3. !TSM:RADIO:FAIL - Newby with Mini NRF24L01 + Mini Pro

!TSM:RADIO:FAIL - Newby with Mini NRF24L01 + Mini Pro

Scheduled Pinned Locked Moved Troubleshooting
18 Posts 4 Posters 3.9k Views 4 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • wuschelW wuschel

    I think the wireing is not right.
    But is habe the Problem i dont understand the Intsruction for sensors.
    The Gateway was not the problem .... the instruction was perfekt....

    i have no idea how check the error, is it the powerd is it the wired, is the radio damaged ?

    gohanG Offline
    gohanG Offline
    gohan
    Mod
    wrote on last edited by
    #4

    @wuschel

    Try swapping radio from gateway to sensor and see if problem follows the radio or not.

    1 Reply Last reply
    0
    • wuschelW Offline
      wuschelW Offline
      wuschel
      wrote on last edited by
      #5

      @gohan thx but in the gateway i used nrf with NRF24L01 PA LNA the sensors Mini NRF24L01+ SMD 1.27MM i have x25 NRF SMD the switch/swipe is not a option the SMD have to be work ... i hope u know what u mean

      1 Reply Last reply
      0
      • gohanG Offline
        gohanG Offline
        gohan
        Mod
        wrote on last edited by
        #6

        Ok i got that, I meant to swap the radios just to check is the problem was the radio or not, because if the gateway is working it mean the wiring in that one is correct so you know the radio module has to work and if not then it is the module that has problem. After the test you put the NRF24L01 PA LNA back to the gateway

        1 Reply Last reply
        1
        • wuschelW Offline
          wuschelW Offline
          wuschel
          wrote on last edited by
          #7

          ok i have 2 from the PA i will try this.
          i will post the result today or tomorrow.

          THX

          1 Reply Last reply
          1
          • wuschelW Offline
            wuschelW Offline
            wuschel
            wrote on last edited by
            #8

            i have orderd new nrf without the adapter and that looks great

            Starting sensor (RNNNA-, 2.0.0)
            TSM:INIT
            TSM:RADIO:OK
            TSP:ASSIGNID:OK (ID=3)
            TSM:FPAR
            TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
            TSM:FPAR
            TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
            TSM:FPAR
            TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
            TSM:FPAR
            TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
            !TSM:FPAR:FAIL
            !TSM:FAILURE
            TSM:PDT
            TSM:INIT
            TSM:RADIO:OK
            TSP:ASSIGNID:OK (ID=3)
            TSM:FPAR
            TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
            TSM:FPAR
            TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
            TSM:FPAR
            TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
            TSM:FPAR
            TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
            !TSM:FPAR:FAIL
            !TSM:FAILURE
            TSM:PDT
            TSM:INIT
            TSM:RADIO:OK
            TSP:ASSIGNID:OK (ID=3)
            TSM:FPAR
            TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
            TSM:FPAR
            TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:

            have everyone tested the OSH adapter ? and what must be changed to use ist in the code.
            the pins are diffrent

            1 Reply Last reply
            0
            • gohanG Offline
              gohanG Offline
              gohan
              Mod
              wrote on last edited by
              #9

              There are too mail failures, there is probably something wrong in the code

              wuschelW 1 Reply Last reply
              0
              • gohanG gohan

                There are too mail failures, there is probably something wrong in the code

                wuschelW Offline
                wuschelW Offline
                wuschel
                wrote on last edited by
                #10

                @gohan the code is from the mysensros libery, the error is always after 4 cycles.

                is that a problem ?

                1 Reply Last reply
                0
                • gohanG Offline
                  gohanG Offline
                  gohan
                  Mod
                  wrote on last edited by
                  #11

                  This is how it should look like when it can establish a connection to gateway

                  0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.0
                  3 TSM:INIT
                  4 TSF:WUR:MS=0
                  12 TSM:INIT:TSP OK
                  13 TSM:INIT:STATID=2
                  15 TSF:SID:OK,ID=2
                  17 TSM:FPAR
                  58 TSF:MSG:SEND,2-2-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
                  88 TSF:MSG:READ,0-0-2,s=255,c=3,t=8,pt=1,l=1,sg=0:0
                  92 TSF:MSG:FPAR OK,ID=0,D=1
                  2066 TSM:FPAR:OK
                  2067 TSM:ID
                  2068 TSM:ID:OK
                  2070 TSM:UPL
                  2074 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1
                  2086 TSF:MSG:READ,0-0-2,s=255,c=3,t=25,pt=1,l=1,sg=0:1
                  2091 TSF:MSG:PONG RECV,HP=1
                  2094 TSM:UPL:OK
                  2096 TSM:READY:ID=2,PAR=0,DIS=1
                  2101 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=OK:0100
                  2117 TSF:MSG:READ,0-0-2,s=255,c=3,t=15,pt=6,l=2,sg=0:0100
                  2125 TSF:MSG:SEND,2-2-0-0,s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=OK:2.1.0
                  2137 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=OK:0
                  3154 TSF:MSG:READ,0-0-2,s=255,c=3,t=6,pt=0,l=1,sg=0:M
                  3164 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=11,pt=0,l=25,sg=0,ft=0,st=OK:PIR_TemperatureAndHumidit
                  3174 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=12,pt=0,l=3,sg=0,ft=0,st=OK:1.0
                  3183 TSF:MSG:SEND,2-2-0-0,s=0,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=OK:
                  3192 TSF:MSG:SEND,2-2-0-0,s=1,c=0,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
                  3201 TSF:MSG:SEND,2-2-0-0,s=2,c=0,t=6,pt=0,l=0,sg=0,ft=0,st=OK:
                  3207 MCO:REG:REQ
                  3211 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=OK:2
                  3220 TSF:MSG:READ,0-0-2,s=255,c=3,t=27,pt=1,l=1,sg=0:1
                  3225 MCO:PIM:NODE REG=1
                  3227 MCO:BGN:STP
                  

                  When you have 4 repeats it mean there is a problem and it can not find the gateway

                  1 Reply Last reply
                  0
                  • wuschelW Offline
                    wuschelW Offline
                    wuschel
                    wrote on last edited by
                    #12

                    Ok, i understand.
                    but how can i fix that?

                    Starting sensor (RNNNA-, 2.0.0)
                    TSM:INIT
                    TSM:RADIO:OK
                    TSP:ASSIGNID:OK (ID=3)
                    TSM:FPAR
                    TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
                    TSM:FPAR
                    TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
                    TSM:FPAR
                    TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
                    TSM:FPAR
                    TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
                    !TSM:FPAR:FAIL
                    !TSM:FAILURE
                    TSM:PDT
                    TSM:INIT
                    TSM:RADIO:OK
                    TSP:ASSIGNID:OK (ID=3)
                    TSM:FPAR
                    TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
                    TSM:FPAR
                    TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
                    TSM:FPAR
                    TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
                    TSM:FPAR
                    TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
                    !TSM:FPAR:FAIL
                    !TSM:FAILURE
                    TSM:PDT
                    
                    
                    
                    
                    0;255;3;0;9;Starting gateway (RNNGA-, 2.0.0)
                    0;255;3;0;9;TSM:INIT
                    0;255;3;0;9;TSM:RADIO:OK
                    0;255;3;0;9;TSM:GW MODE
                    0;255;3;0;9;TSM:READY
                    0;255;3;0;14;Gateway startup complete.
                    0;255;0;0;18;2.0.0
                    0;255;3;0;9;No registration required
                    0;255;3;0;9;Init complete, id=0, parent=0, distance=0, registration=1
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL)
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL)
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL)
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL)
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=ok:0
                    0;255;3;0;9;TSP:MSG:READ 3-3-0 s=255,c=3,t=24,pt=1,l=1,sg=0:1
                    0;255;3;0;9;TSP:MSG:PINGED (ID=3, hops=1)
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=fail:1
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL)
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL)
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL)
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL)
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=ok:0
                    0;255;3;0;9;TSP:MSG:READ 3-3-0 s=255,c=3,t=24,pt=1,l=1,sg=0:1
                    0;255;3;0;9;TSP:MSG:PINGED (ID=3, hops=1)
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=fail:1
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL)
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL)
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL)
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL)
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL)
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0
                    0;255;3;0;9;TSP:SANCHK:OK
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL)
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0
                    0;255;3;0;9;TSP:MSG:READ 3-3-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
                    0;255;3;0;9;TSP:MSG:BC
                    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=3)
                    0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL)
                    0;255;3;0;9;TSP:MSG:GWL OK
                    0;255;3;0;9;!TSP:MSG:SEND 0-0-3-3 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0
                    
                    
                    1 Reply Last reply
                    0
                    • gohanG Offline
                      gohanG Offline
                      gohan
                      Mod
                      wrote on last edited by
                      #13

                      When I had that problem I replaced the radio modules with different ones and it started to work. Did you put capacitor on the radio module?

                      1 Reply Last reply
                      1
                      • wuschelW Offline
                        wuschelW Offline
                        wuschel
                        wrote on last edited by
                        #14

                        I have capacitor on the gateway on sensor not.

                        i will try tomorrow, have a long way ahead of me

                        1 Reply Last reply
                        0
                        • gohanG Offline
                          gohanG Offline
                          gohan
                          Mod
                          wrote on last edited by
                          #15

                          Capacitor is pretty much mandatory. Start from 4.7 uF and increase up to 100 and see if you see any changes

                          wuschelW 1 Reply Last reply
                          0
                          • jogantJ Offline
                            jogantJ Offline
                            jogant
                            wrote on last edited by
                            #16

                            Another thing is that sensor and gateway need a minimum distance. I had gateway and sensor on my desktop for testing and had problems. So I put away the gateway 2 meters and problems are gone. Just a try.

                            1 Reply Last reply
                            1
                            • gohanG gohan

                              Capacitor is pretty much mandatory. Start from 4.7 uF and increase up to 100 and see if you see any changes

                              wuschelW Offline
                              wuschelW Offline
                              wuschel
                              wrote on last edited by
                              #17

                              @gohan on sensor too ? or only gateway ?

                              1 Reply Last reply
                              0
                              • gohanG Offline
                                gohanG Offline
                                gohan
                                Mod
                                wrote on last edited by
                                #18

                                Capacitor needs to go as close as possible to the vcc/gnd pins of the radio module as possible on both of them.

                                1 Reply Last reply
                                1
                                Reply
                                • Reply as topic
                                Log in to reply
                                • Oldest to Newest
                                • Newest to Oldest
                                • Most Votes


                                26

                                Online

                                11.7k

                                Users

                                11.2k

                                Topics

                                113.1k

                                Posts


                                Copyright 2025 TBD   |   Forum Guidelines   |   Privacy Policy   |   Terms of Service
                                • Login

                                • Don't have an account? Register

                                • Login or register to search.
                                • First post
                                  Last post
                                0
                                • MySensors
                                • OpenHardware.io
                                • Categories
                                • Recent
                                • Tags
                                • Popular