Which thumbwheel switch would be more fantastic ?

[kynix]

Thumbwheel switch can be seen anywhere, especially it can be connected to cars and when driving, thumbwheel switch has become an indispensable part. I am going to buy a new thumbwheel switch to make my car refresh so I went to a retailing shop, satisfied with two thumbwheel switches. I am puzzled about that, so I come to this forum to turn to you to discuss which one would be more fantastic.

Here are two thumbwheel switches offered for you to choose from:
One is A7BS-207

SPECIFICATIONS:
Termination-Style: Card Edge/Solder Pad with Component Mounting
Mounting-Type: Panel Mount, Snap-In
Features:
Actuator-Type: Pushwheel
Contact-Material: -
Contact-Finish: -
Number-of-Positions: 10 Position
Panel-Cutout-Dimensions: -
Contact-Rating-Voltage: 0.1A @ 50VAC/28VDC
Output-Code: BCD
Read-Out: 0 ~ 9
Number-of-Sections: 1
Display-Characters-Height: 0.189" (4.80mm)
End-Caps: Sold Separately
Section-Width: 0.315" (8.00mm)
Actuator: Thumbwheel

Wide Range of Locking-type
Models Available
• Character height of 4.8 or 3.2 mm makes for easy-to view display.
• Installation is easy with snap-in mounting.
• The series includes a complete range of locking-type models that prevent accidental operation.

The other is PICOD131AK2
The PICOD family offers small panel-mounted pushwheel code switches, ideally suited for high density applications. They are used for the controlling and programming of frequency synthesizers, counters and timers, data comparators, security encoders, weighing machines, etc. The dependable pushbutton action allows narrow 0.3 inch width on panel. Changes to higher or lower settings are accomplished rapidly by successive operation of the appropriate buttons. The featherweight PICOD is less than 0.6 inch high, yet
rugged enough for hand-held and portable instruments that may be subjected to field abuse. Heavy gold plating on wiping contacts affords low contact resistance for reliable operation over long periods of service. Easy-to-read characters are viewed through dust-sealed window. Installation costs are minimized by snap together design – no inconvenient hardware.

SPECIFICATIONS:

Termination-Style: Card Edge/Solder Pad
Mounting-Type: Panel Mount, Snap-In
features:
Actuator-Type: Pushwheel
Contact-Material: Copper Alloy
Contact-Finish: Gold
Panel-Cutout-Dimensions: -
Contact-Rating-Voltage: 0.1A @ 40VAC/DC
Output-Code: BCD
Read-Out: 0 ~ 9
Number-of-Sections: 1
Display-Characters-Height: 0.122" (3.10mm)
End-Caps: Sold Separately
Section-Width: 0.300" (7.62mm)

I have been puzzled about which thumbwheel switch would be more fantastic. As far as I am concerned, I would consider the A7BS-207 as it looks very light and easy to mount. What is your idea ? Do you agree with my ideas ? Any of your ideas would be highly appreciated.

May someone would like to help ?

thanks in advance.

[Yveaux]

This post is deleted!

[kynix]

@Yveaux Thanks for your comment. I would definately and confidently choose the first one. thank you very much.

[kynix]

@all What is others' opinions ? I would like to listen to others' opinions.

[hek]

@kynix,

Why do you continue to spam this community? What's the purpose? It will only create badwill when someone searches for your ugly spamming corporation.

https://forum.mysensors.org/topic/6090/is-there-an-easier-way-to-compare-the-voltages-of-these-two-sensors/3

No-one will here will ever ever buy anything from you.

P.S. Your tactics works both ways you know. Try google "Kynix" and follow the second link to your own facebook page. We'll continues associate your company name with SPAM as long as you continue doing this crap. Mo ha ha.

[scalz]

I agree too with @hek, crappy commercial/marketing practice = :poop: company

[Yveaux]

Yeah, pretty low fooling MySensors users into a discussion... :-1:

[kynix]

Do you think your comments are bad for dignity ?

[hek]

@kynix, you've lost already.

And you might wanna change your company name. It has bad associations now. And It'll take a long time to get rid that. :facepunch:

[kynix]

Nothing can change us.

[tekka]

@kynix One + 2 = ?

[tbowmo]

@kynix

Taken from http://www.SPAMMINGCOMPANYLINKREMOVED.com/profile :

Kynix Semiconductor HongKong Limited was founded in 2008, specializing in electronic components distribution business. We adhere to honesty and ethics as our business philosophy, and have gradually established an excellent reputation and credibility in our international business. With the accurate quotation, excellent credit, reasonable price, reliable quality, fast delivery, authentic service, we have won the praise of majority of customers.

How would you explain your posts above, when the company you seem to represent, have this on their website? Posting spam on forums doesn't rank high on any normal thinking persons ethics scale.

[hek]

...and they do it on all electronics forums they can find:

I.e.
https://www.infineonforums.com/threads/4698-Questions-regarding-Infineon-BTN8962
http://forum.basecamelectronics.com/index.php?p=/discussion/2392/encoder-missing-counts

:poop:

[Anticimex]

@kynix your brand suck. All your products suck. I don't ever want to see your name here ever again. And you smell bad too.

[Chester]

How many thumbs do you require to create one switch? Is there a good thumb to wheel ratio that makes for a good switch? Would you make the switch out of different wheels, say light passenger vehicle versus a late 16th century cart wheel? Would you be able to specify the amount of each type of wheel in the production of said switch? How about thumb types? Can I have one switch made from virgin female thumbs, and would it be more expensive than one made from 50 year old retired carpenter thumbs? I would have thought the carpenter thumbs would be more expensive than virgin female thumbs, as most retired carpenters have lost part of their thumb by the time they retire, so would be quite rare to obtain.

TL:DR, your products suck, and have been blacklisted from my stock ordering options too. So long!