Smart Water Level Detector
-
@jemish Have a look at these
-
Sensors output is 0-190 ohms (2 wire output). Output needs to activate 4 (empty -- -- full) red LEDs sequentially as the tank fills. What component will activate as a SW by 0, 63, 126, 190 ohms? And how to wire the four SWs from a two wire input. Source 12v. Thanks for looking
-
@jemish said in Smart Water Level Detector:
Any one make smart water level Detector in our home water tank?
One popular option is a float switch sensor, which can be easily installed on the side of the tank and will trigger an alert when the water level reaches a certain point.
-
Hello@jemish
Yes, it is possible to create a smart water level detector for your home water tank using an ultrasonic sensor or a float switch connected to a microcontroller with wireless connectivity.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login