nRF24L01+ mounted on a breadboard
-
This tip may already be known.
I have an Arduino uno and an breadbord to make tests of new projects but got tired
of to have the radio "nRF24L01+" hanging loose in the wires.
I then find that there was an adapter to the ESP8266-01, "WiFi Module", to be used
on an breadboard. The pin configuration is wrong so I put a label on the adapter
and numbered the pins in accordance with nRF24L01+, pic 1. I also have to desolder the
capacitor on the adapter, pic 2, this could be of diiferent kinds and other places.
And now the radio fits on the breadboard!
-
This tip may already be known.
I have an Arduino uno and an breadbord to make tests of new projects but got tired
of to have the radio "nRF24L01+" hanging loose in the wires.
I then find that there was an adapter to the ESP8266-01, "WiFi Module", to be used
on an breadboard. The pin configuration is wrong so I put a label on the adapter
and numbered the pins in accordance with nRF24L01+, pic 1. I also have to desolder the
capacitor on the adapter, pic 2, this could be of diiferent kinds and other places.
And now the radio fits on the breadboard!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login