Sensebender pinout

[Alpoy]

Hi,

I just got my sensebender gateway, added the w5100 module and was about to add a RFM69HCW module but I got confused by the pinout on the Mysx 2.6.
By reading the mysx docs I assumed Pin1 was the "square one", but according to the docs it's 3.3V but I measured 5V between Pin1 and 4...??

Are there any "simple" pinout images of the mysx/Sensebender like there's for Arduino's?

[tbowmo]

@Alpoy

Why not just using a RFM69HW module, which can be mounted on the backside?

Besides that, pin 1 is Vraw (according to mysx specification), and carries +5V on the gateway (connected to Vusb). Pin2 is 3v3 from the onboard regulator.

[Alpoy]

Apply face to palm ...., I must have read it completely wrong. :confused:

Oh, can I mount it directly on the backside...interesting! Can a RFM69HW module communicate with a RFM69HCW ? :-)

[mfalkvidd]

@Alpoy yes that can. The main (only?) difference is that the C model has an older pinout.

[Alpoy]

Nice, thanks for helping guys! :+1: