Sensebender pinout
-
Hi,
I just got my sensebender gateway, added the w5100 module and was about to add a RFM69HCW module but I got confused by the pinout on the Mysx 2.6.
By reading the mysx docs I assumed Pin1 was the "square one", but according to the docs it's 3.3V but I measured 5V between Pin1 and 4...??Are there any "simple" pinout images of the mysx/Sensebender like there's for Arduino's?
-
Why not just using a RFM69HW module, which can be mounted on the backside?
Besides that, pin 1 is Vraw (according to mysx specification), and carries +5V on the gateway (connected to Vusb). Pin2 is 3v3 from the onboard regulator.
-
Apply face to palm ...., I must have read it completely wrong.
Oh, can I mount it directly on the backside...interesting! Can a RFM69HW module communicate with a RFM69HCW ?
-
@Alpoy yes that can. The main (only?) difference is that the C model has an older pinout.
-
Nice, thanks for helping guys!
Suggested Topics
-
Over the air updates
General Discussion • 23 Mar 2014, 21:38 • ToSa 1 Mar 2015, 11:21 -
Sensor to detect marijuana vape/smoke
Hardware • 21 Jan 2025, 06:36 • Hellmark 25 Feb 2025, 20:56 -
Arduino Nano Every problem
Hardware • 1 Feb 2020, 09:18 • hakha4 5 Dec 2023, 02:21 -
Does MySensors require Arduino Timer 2?
Hardware • 6 Jan 2024, 19:39 • OldSurferDude 11 Jan 2024, 04:39 -
hlk-pm01 are to noisy for rfm69?
Hardware • 5 Aug 2023, 21:16 • Tmaster 9 Aug 2023, 16:28 -
Best VOC sensor for detecting a wide range of VOC's?
Hardware • 26 Oct 2023, 23:59 • NeverDie 18 Nov 2023, 01:41
