Mysensor Ethernet gateway message definition
-
Hi All,
I have setup my Raspberry Pi as an Ethernet gateway and I have programmed the MotionSensor sample sketch to my arduino pro mini.
When I execute the gateway in debug mode "sudo ./bin/mysgw -d" I get the following output:mysgw: TSF:MSG:READ,1-1-0,s=2,c=1,t=16,pt=0,l=1,sg=0:0What does the s=2, c=1, t=16... mean?
-
Hi All,
I have setup my Raspberry Pi as an Ethernet gateway and I have programmed the MotionSensor sample sketch to my arduino pro mini.
When I execute the gateway in debug mode "sudo ./bin/mysgw -d" I get the following output:mysgw: TSF:MSG:READ,1-1-0,s=2,c=1,t=16,pt=0,l=1,sg=0:0What does the s=2, c=1, t=16... mean?
@FredRoot see https://forum.mysensors.org/post/43373
If you remove the "mysgw: " part you can use the log parser, like this.
-
@FredRoot see https://forum.mysensors.org/post/43373
If you remove the "mysgw: " part you can use the log parser, like this.
@mfalkvidd Thank you. This will help a lot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login