💬 Carte Fil Pilote MySensors NRF24L01
-
I'm French too and I completely agree with scalz.
Language-specific subforums would just restrict everyone's access to useful information. -
Yes I have ;)
I can also designa box, I should do one ! It's not serious to put a circuit with live voltage without protection !
I'll try to design a box as soon I'll can.
-
Hi napo7,
First off all congratulation for all the work you did so far and the sharing! I'd be glad to discuss with you directly (I'm French too ;-))I'm also in the process of designing such kind of board.
I thought of using a standard Legrand derivation box (sorry for the awkward translation but I mean "boite de derivation" in plain French). This kind of box are dedicated to this kind of purpose, hide live wire that would be exposed otherwise.
I guess 3D printing is not a bad idea in essence but it's not secure; in my opinion it would melt too easily in case of electrical disorder on the 220V parts.Other question: Why are you moving from nrf to RFM69?
Congrats again dude, you rule!
Cheers,
Marc -
Yes, you're probably right ! The ABS used in printing starts to melt at about 185°. I don't know for Legrand boxes !
I don't know how we could manage to exchange our mail addresses ? No PM system on mysensors forum !?
@napo7 You can use the chat for speak with marc ;)
For legrand boxes, if you apply 650°C during x secondes, the box will not burn or participate in the spread of a fire ;)
more informations at http://www.leblogdubatiment.com/22/09/2014/actualites-batiment-securite-incendie-quelle-est-la-norme-de-resistance-au-feu-des-luminaires/organismes-du-batiment/#.WJOElH--WUkWe need to look the temperature of the Auto-ignition and not the melt temperature for each material.
With PLA it's 388°C and around 500°C for ABS technologie
-
PCBs are out of factory.
I should receive them in 2-3 weeks.Stay in touch ;)
-
Hi !
Not so much news,
The PCB are at home ;)
Missing time to test them, but I should start in a few days ! -
Any news on this project? Thanks!
