Is there an easy way to send a message from the gateway (or nodo also) to the controller as a log message? That meaning internal message type and I_LOG_MESSAGE.
Hello everyone,
Firstly, I apologize for reviving such an old thread, but I find myself in a unique situation and was hoping some of you might be able to help.
I hope everyone's doing well. I have a specific inquiry that I couldn't find a recent solution for. Does anyone here know of a tool to generate "fake" Dooya remote (DC90) RF codes for curtains? I've acquired a few motors without controllers and am trying to integrate them with Home Assistant and Bradlink RF remote. Specifically, I'm searching for a way to generate codes for the Up, Down, Stop, and the "Set" button functions to configure curtain limits.
Any insights or guidance would be immensely appreciated. Thank you so much in advance!
Hi There,
I had a quick look, and this looks focused on SP8266. I have myself contributed to this: New TLS implementation #1520 .
I don't think this will apply for RaspberryPI MQTT GW.
Thanks and regards,
Eric.
It seems that using an Ethernet PHY (like LAN8720) with the ESP32 in a MySensors setup requires a bit of extra configuration, including initializing the PHY using the ETH.h library and disabling the default Wi-Fi initialization. Interestingly, this setup allows for dual IP addresses, with one for the Ethernet connection and another for Wi-Fi, which can be useful in certain applications.
Just for reference, as this solution was no yet mentioned:
You could also use a second UART on your controller or a software serial for debuging with the following defines:
#define MY_SERIALDEVICE Serial // Interface for controller connection
#define MY_DEBUGDEVICE Serial1 // Interface for debug output
Regards, Edi
I never noticed the 20 device cap. That won't do.
What I am thinking of now, is to use EspHome and just dedicate a router to handle just that network - so kinda creating an IoT network without internet access and as standalone as possible. Using static IPs should make the response better too.
Thanks for looking into this.
