💬 JMP Arduino Pro Mini Multisensor Board v2.1

[openhardware.io]

https://www.openhardware.io/view/561/JMP-Arduino-Pro-Mini-Multisensor-Board-v21

[gohan]

Could you please add some details on all those solder pads and why you choose that GPIO layout? Also it could be beneficial to have like a sma connector for rfm69 antenna

[Anticimex]

Please follow the rules for the CERN license. You have no license files and changelogs attached to your design as required.
If you have any questions, read here: https://forum.mysensors.org/topic/3096/open-hardware-licensing/

[jumping]

@Anticimex, sorry I will provide the correct files as soon as possibile! thanks

[jumping]

This post is deleted!

[jumping]

@gohan I will add dome details as soon as possible; about the SMA connector it's too big (7.9mm diameter) for this board.

[jumping]

New version 2.1 with EEPROM and signing IC!

[Anticimex]

@jumping nice, but you are still missing CERN documentation ;)

[jumping]

@anticimex You are too fast :-) Now the CERN files are uploaded!!