💬 Wireless remote control
-
-
I have published all the documentation in a Github repository. If someone wants to make PCBs, I recommend that you wait a little longer until you receive my PCBs and try them.
-
Any updates on the board? I really like the design. Where are you getting the casings for the PCB?
-
Hi @talhatec ,
The remote controls work well. 4 months ago I installed a new battery and from time to time I press the button to check if they continue with battery, they sleep correctly.
I remain pending to change the RF antenna for a better one and to improve some failures in the connectors of the battery that at the moment are very fragile (the pad has little copper).
The casing can be purchased online
https://www.ebay.com/itm/Bluetooth-4-0-GPS-Tracker-Locator-Smart-Alarm-Anti-lost-Device-Self-Portrait-SC/401394156488For now the project is stopped, I want to test the Aqara sensors (I buy them this week), in any case the domotics is now my lowest priority.
Suggested Topics
-
2 or more DHT11 - Sensors on one Arduino NANO MYSENSOR
Development • 12 May 2015, 14:11 • michlb1982 13 May 2015, 13:57 -
Orientation Actuator (pan/tilt)
OpenHardware.io • 23 Mar 2016, 11:25 • openhardware.io 23 Mar 2016, 11:25 -
Mysensors Uno Shield Version 2.0
OpenHardware.io • 9 Mar 2016, 03:44 • openhardware.io 10 Mar 2016, 07:33 -
Send an array of ADC data
General Discussion • 15 Mar 2023, 20:14 • Vasilis Vlachoudis 15 Mar 2023, 20:14 -
How do I setup Raspberry Pi 2 with NRF24L01 as MySensor 2.0 Gateway with MyController as controller
Hardware • 21 Oct 2016, 19:28 • Christian Simonsen 27 Oct 2016, 09:00 -
SCT-013-030 Energy Meter
OpenHardware.io • 28 Feb 2016, 10:55 • openhardware.io 28 Feb 2016, 10:55 -
💬 MySWeMosGWShield - WeMos Mini MySensors Gateway Shield
OpenHardware.io • 22 Dec 2016, 05:01 • openhardware.io 8 Aug 2018, 17:12 -
💬 Very narrow and minimal switch node
OpenHardware.io • 9 Feb 2016, 22:22 • openhardware.io 14 Nov 2016, 20:14
