AC-DC at own

[axillent]

@koresh pcb picture is presented. Please clarify what else you want to see. All is open

[axillent]

@koresh transformers is not a big deal but selection is very limited. I only found one item with reasonable pricing and sutable parameters. You can find it on ali by name EE10-A1

[Koresh]

@axillent I can't see the gerbers or sources of the latest board (din shape). I've seen your transformers on ali. It is perfect. I need auxiliary coil for my projects so I should place custom order on the factory.

[axillent]

@koresh if you need gerber let me know, i will download. I need to note that DIN is designed for a particular design of the cover

Share please where it is possible to order customized transformers.

I do have all things to build transformers myself. It is an alternative way

[axillent]

ready

[jeremushka]

@axillent said in AC-DC at own:

EE10-A1

Congratulations! It can replace the HLK-PM01 that we are using a lot here. Is it possible for you to share the schematics ?

[axillent]

@jeremushka for sure

schematic is standard, simplified version from datasheet
D8, D11 and R22 are optional, it is to be able to source power from different sources (for example different phases, or from main power and from generator).
D12 I'm using 11V to have output at about 12.1V

[jeremushka]

Thanks. What is the purpose of the inductor at the output of the circuit? why not to use one also after the bridge rectifier?

[blacey]

@axillent - Nice to see you here again! Well done :+1:

[axillent]

@blacey thanks

[axillent]

@jeremushka said in AC-DC at own:

Thanks. What is the purpose of the inductor at the output of the circuit? why not to use one also after the bridge rectifier?

inductor at output is to reduce riple
on hight voltage side will be better to put filter but there is no place for it
inductor as such will not bring too much value

[jeremushka]

@axillent thank you. it is clear information :) very nice work

[jeremushka]

@axillent said in AC-DC at own:

@jeremushka for sure

schematic is standard, simplified version from datasheet
D8, D11 and R22 are optional, it is to be able to source power from different sources (for example different phases, or from main power and from generator).
D12 I'm using 11V to have output at about 12.1V

some questions regarding the schematics:

1. does TVS diode 600W 5V is efficient enough? or absolutely need cut off at 160V such as 600W 160A ?
2. for the Fuse, a slow fuse 10A is enough i think, isn't it?

[axillent]

@jeremushka said in AC-DC at own:

some questions regarding the schematics:

1. does TVS diode 600W 5V is efficient enough? or absolutely need cut off at 160V such as 600W 160A ?
2. for the Fuse, a slow fuse 10A is enough i think, isn't it?

TVS need to be for 120-160V in case you supply 230V AC. You can refer to linkswitch designer for your specific needs.
The purpose of this TVS is to be a snubber because of inductive load. Instead of TVS an RC snubber could be used.

it is 3Watts supply, 0.5-1A slow fuse is fine

[jeremushka]

@axillent said in AC-DC at own:

@jeremushka said in AC-DC at own:

some questions regarding the schematics:

1. does TVS diode 600W 5V is efficient enough? or absolutely need cut off at 160V such as 600W 160A ?
2. for the Fuse, a slow fuse 10A is enough i think, isn't it?

TVS need to be for 120-160V in case you supply 230V AC. You can refer to linkswitch designer for your specific needs.
The purpose of this TVS is to be a snubber because of inductive load. Instead of TVS an RC snubber could be used.

it is 3Watts supply, 0.5-1A slow fuse is fine

Thanks for the answer. i will play with this LNK component. never used it before. I am curious to know the performances of it.
for your design, you have added others functions on your PCB ? such as DC-DC converter ... etc.. ?

[axillent]

@jeremushka said in AC-DC at own:

Thanks for the answer. i will play with this LNK component. never used it before. I am curious to know the performances of it.
for your design, you have added others functions on your PCB ? such as DC-DC converter ... etc.. ?

my DIN desing is universal. it is for the set of different devices with common 12V power
dc-dc is used to feed MCU from 12V

[jeremushka]

@axillent, i am designing your board on altium designer. However, i am facing difficulties with the footprint of the transformer. Is it possible to share it or your pcb file?

[axillent]

@jeremushka I do have this footprint in altium but the library is big. do you know how to export a single element?

[jeremushka]

@axillent yes you are right. Same for me.
Usually, what i am doing is to create a project library from Schematic. For that, i open the Schematic. Then Design menu => make a schematic library. All the components and footprint of the Schematic will be copied and integrated. If schematic is huge or some components no need to extract, then i remove the one i don't need from the schematic library. At this end, you may have for example only the transformer component and footprint in the schematic library and you can extract this library for dxternal purpose. It is maybe not the best methodology (i don't know) but it works.

[Suwin]

what is the TVS diode that you are using?????