Presenting to HA over ethernet
-
Hello,
Just reading into Mysensors and my main question is on presenting to the controller. Would I just be able to set the IP address of the HA controller on the gateway and then it will automatically show show up in HA? I understand I would at least need to add Mysensors into the config on the HA controller. But if the sensors could just show up after that, that would be amazing!
-
Hello,
Just reading into Mysensors and my main question is on presenting to the controller. Would I just be able to set the IP address of the HA controller on the gateway and then it will automatically show show up in HA? I understand I would at least need to add Mysensors into the config on the HA controller. But if the sensors could just show up after that, that would be amazing!
https://www.home-assistant.io/components/mysensors/#presentation
Home assistant only supports ethernet gateways that act as servers. So home assistant will connect as the client, ie we only configure the gateway address in home assistant, not the other way around.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login