Sensor measuring force during pulling
-
Hello,
I’m surching a sensor as small
As
Possible. It has to kome in a little machine to measure the force during pulling at both sides of the machine. The range of the forces’ll be between 0 and 300kg or 0 till 3000 NAnyone can help me witj that?
Grts
Bart
-
Hello,
I’m surching a sensor as small
As
Possible. It has to kome in a little machine to measure the force during pulling at both sides of the machine. The range of the forces’ll be between 0 and 300kg or 0 till 3000 NAnyone can help me witj that?
Grts
Bart
-
The 300kg might be a challenge. It seems most ali express load cells are aimed at light weights, or weighing humans.
Here are some for lighter weights:
https://www.aliexpress.com/item/1kg-5kg-10kg-small-range-weighing-pressure-sensor-load-cell-set-weight-sensor-set-sensor-HX711AD/32765498523.htmlHere is one for 200kg:
https://www.aliexpress.com/item/New-Arrival-1PCX-200kg-electronic-platform-scale-load-cell-pressure-balanced-cantilever-load-weight-sensor-New/32703877639.htmlIf you can't find one that does 300kg, you could use a lever mechanism to scale the force appropriately. I also saw some adds for custom load cells, but that is more expensive.
