BH1750 library issue with using sleep
-
I seem to have a problem with receiving ACK when using the sleep_time function in the example sketch for the BH1750FVI. Every time I leave the sleep function in the sketch, I end up only getting one value report with ACK during the presentation. After that within the loop, and watching the serial monitor, the values are no longer reported and I keep getting ST=NACK all the time. The only way so far for me to get the sketch working correctly, is if I use the wait function and remove the sleep function from the sketch. Has anyone else had this problem and if so, know of a way to resolve this?
-
I seem to have a problem with receiving ACK when using the sleep_time function in the example sketch for the BH1750FVI. Every time I leave the sleep function in the sketch, I end up only getting one value report with ACK during the presentation. After that within the loop, and watching the serial monitor, the values are no longer reported and I keep getting ST=NACK all the time. The only way so far for me to get the sketch working correctly, is if I use the wait function and remove the sleep function from the sketch. Has anyone else had this problem and if so, know of a way to resolve this?
@rayne are you using nrf24? If that’s the case, the solution is probably https://forum.mysensors.org/post/92971 / https://github.com/mysensors/MySensors/pull/1193
-
@mfalkvidd yes, I am. So the solution is to load 2.3.1 beta in order to avoid sleeping too fast for the radio to send, receive, ack, settle so to speak?
-
@mfalkvidd Thanks for the advice and I went and downloaded the Mysensors 2.3.1 beta with @tekka 's latest patch. However I will have to report back later how that went after updating the gateway and nodes with the new version. I'm suffering from a human bug right for the past couple of days. Gotta get over this. I have a good feeling this will resolve any issues with sleeping the radios. Thanks again to @mfalkvidd and @tekka for this should anyone find themselves in this particular situation.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login