openHAB binding
-
@bkl Hi,
Use this biding from it`s beginning, many thanks again. Just want to know if there is any function like the "ack" as there is on OH2 binding, where gateway re-sends the msg 5 times if it does not hear from the sensor after a command. It´s a killer function to make it more reliable, but I´m not ready for OH2 yet.
Thanks
-
Hi,
after my openHAB system completely failed I had to re-install everying. I had MySensors configured the old way with a lot of rules with the serial binding I thought I give the binding a try.
In general it works but I have issues with S_COVER, not sure how to configure this.
But of course in openhab it is a single Rollershutter item... I think I could do a workaround in creating in total 4 items and only show my rollershutter and then have a rule and based on up/down/stop update the 3 items.Anyhow, seems to complex.
What is best practice here?
The sensor presents itself with this:
* Example item: 188;2;V_UP - Window covering. Up. * Example item: 188;2;V_DOWN - Window covering. Down. * Example item: 188;2;V_STOP - Window covering. Stop. * Example item: 188;2;V_PERCENTAGE - Percentage value. 0-100 (%) ``` -
Hi,
after my openHAB system completely failed I had to re-install everying. I had MySensors configured the old way with a lot of rules with the serial binding I thought I give the binding a try.
In general it works but I have issues with S_COVER, not sure how to configure this.
But of course in openhab it is a single Rollershutter item... I think I could do a workaround in creating in total 4 items and only show my rollershutter and then have a rule and based on up/down/stop update the 3 items.Anyhow, seems to complex.
What is best practice here?
The sensor presents itself with this:
* Example item: 188;2;V_UP - Window covering. Up. * Example item: 188;2;V_DOWN - Window covering. Down. * Example item: 188;2;V_STOP - Window covering. Stop. * Example item: 188;2;V_PERCENTAGE - Percentage value. 0-100 (%) ```I saw STOP in S_cover is not supported in OH2 - what about OH1? Anyone?
-
I saw STOP in S_cover is not supported in OH2 - what about OH1? Anyone?
@parachutesj According OH2: That was fixed a looooooong time ago. :D
Refer to: https://github.com/tobof/openhab2-addons/wiki/Examples for an example (cover).
-
@parachutesj According OH2: That was fixed a looooooong time ago. :D
Refer to: https://github.com/tobof/openhab2-addons/wiki/Examples for an example (cover).
@TimO thank you.
and what is with OH1? Not getting it to work.
Does not seem that STOP works, UP & DOWN and PERCENTAGE work -
@TimO thank you.
and what is with OH1? Not getting it to work.
Does not seem that STOP works, UP & DOWN and PERCENTAGE work@parachutesj I can't help you with this version of the binding, I've never used it.
-
@parachutesj I can't help you with this version of the binding, I've never used it.
@TimO Thanks anyway. I am slowly moving into the OH2 direction - still a lot of things to be clarified and configured
-
Hello guys, who can unpin this post?
It is terribly outdated.
The effort for an openhab-mysensors binding is still valid but several things changed on OpenHAB, making this a lot easier.
-
Hello guys, who can unpin this post?
It is terribly outdated.
The effort for an openhab-mysensors binding is still valid but several things changed on OpenHAB, making this a lot easier.
-
@guillermo-schimmel done. Is there some other post that should be pinned instead?
@mfalkvidd Thanks! Just give me a couple of days and I will try to make a new tutorial for mysensors+openhab.
