Need some help with this sensor setup for RF remote
-
Hi.
This is my first post so sorry if this is in the wrong section.
Im thinking of doing a RFM69/arduino mini pro remote to have some WAF to my sonoff switches.
The RF remote will have 4 buttons that in the end will turn on some sonoff switches in my apartment.My question is, when the arduino and RFM69 is in deep sleep state, how long will it take for the "remote" to power up and send the button pressed message to the gateway? To have some sort of WAF my thinking is that this need to be lower then 1 sec. Is this possible?
And if you have any suggestions please feel free to say them!
Best Regards
Brew8it -
Hi.
This is my first post so sorry if this is in the wrong section.
Im thinking of doing a RFM69/arduino mini pro remote to have some WAF to my sonoff switches.
The RF remote will have 4 buttons that in the end will turn on some sonoff switches in my apartment.My question is, when the arduino and RFM69 is in deep sleep state, how long will it take for the "remote" to power up and send the button pressed message to the gateway? To have some sort of WAF my thinking is that this need to be lower then 1 sec. Is this possible?
And if you have any suggestions please feel free to say them!
Best Regards
Brew8it
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login