💬 Sensebender Gateway

[mfalkvidd]

@mitja-blazinsek You'll need to install the Arduino SAMD board as well. I have just now updated the readme.

[dklinkman]

Just got my Sensebender GW and soldered it up. Adapted the serial sketch to Ethernet and it almost worked. Found some posts on this topic that helped me locate and fix my config error. Now all is well. Thanks! --edit-- added photo

-d

[dklinkman]

@dklinkman said in 💬 Sensebender Gateway:

Sensebender

And I got a Sensebender Micro soldered up and running also!! Just temp and humid so far. Too cool

--edit-- picture

[Soloam]

This post is deleted!

[8667]

Is it possible to use the sensebender board as MQTT gateway? Not Ethernet?

[Soloam]

Yes it is! I use I'm using it as a MQTT gateway for some time

[Christian Schulte genannt Trux]

First: Great work! My GW is working very well!
I wanted to know for what I can use the SD-Card.
My idea is to fetch the logs in the serial and write them to the SD-Card.
But I don't know where. Is there a point in the mySensors core where I can fetch all logs?

[rolandow]

Forgive me if this isn't the right place to ask; but as a beginner, where do I start? How can I order this thing, or any other stuff from OpenHardware.io ? I see so many design files, I'm not sure what to do with them. Soldering the thing I can probably manage, but is there a guide available how to order the PCB, and maybe the parts as well?

[alexsh1]

@rolandow said in 💬 Sensebender Gateway:

Forgive me if this isn't the right place to ask; but as a beginner, where do I start? How can I order this thing, or any other stuff from OpenHardware.io ? I see so many design files, I'm not sure what to do with them. Soldering the thing I can probably manage, but is there a guide available how to order the PCB, and maybe the parts as well?

Sesnebender GW can be ordered from Itead:

https://www.itead.cc/mysensors-gateway.html

Other openhardware.io projects maybe ordered either (1) directly from a link; pcb only (2) you can download eagle files and upload them to pcb manufactures like oshpark.com (3) you can purchase the final product. So a generic answer to your question is it depends :)

I do not think there is a guide here, but if you go to oshpark.com there is a guide how to order a pcb. Parts (BOM) can be ordered from Aliexpress, eBay or more reputable supplies like digi-key or mouser

[Gerator]

Hi!
I'm trying to use sensebender GW as ethernet gateway. I loaded the stock W5100 sketch compiled with samd 1.6.21 defs but it didn't worked. I have been trying out different things and realized that it works with 1.6.12 defs. Now it's working but I'm stuck with an old version. Anyone with the same problem? Maybe I'm missing something?
Also I found out ethernet library in 1.0.5 defs is outdated. I have been trying to use stock one (v2.0) without success. Anyone has tried?
Thanks.

[pepson]

hi
when i try compile sketch only with change radio to rfm69hw i have this:
Arduino:1.8.9 (Windows 10), Płytka:"Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

SensebenderGatewaySerial:95:26: error: 'LED_BLUE' was not declared in this scope

static uint8_t leds[] = {LED_BLUE, LED_RED, LED_GREEN, LED_YELLOW, LED_ORANGE};

                      ^

SensebenderGatewaySerial:95:36: error: 'LED_RED' was not declared in this scope

static uint8_t leds[] = {LED_BLUE, LED_RED, LED_GREEN, LED_YELLOW, LED_ORANGE};

                                ^

SensebenderGatewaySerial:95:45: error: 'LED_GREEN' was not declared in this scope

static uint8_t leds[] = {LED_BLUE, LED_RED, LED_GREEN, LED_YELLOW, LED_ORANGE};

                                         ^

SensebenderGatewaySerial:95:56: error: 'LED_YELLOW' was not declared in this scope

static uint8_t leds[] = {LED_BLUE, LED_RED, LED_GREEN, LED_YELLOW, LED_ORANGE};

                                                    ^

SensebenderGatewaySerial:95:68: error: 'LED_ORANGE' was not declared in this scope

static uint8_t leds[] = {LED_BLUE, LED_RED, LED_GREEN, LED_YELLOW, LED_ORANGE};

                                                                ^

C:\Users\Piotrek\Desktop\SensebenderGatewaySerial-sketch\SensebenderGatewaySerial\SensebenderGatewaySerial.ino: In function 'void preHwInit()':

SensebenderGatewaySerial:116:10: error: 'MY_SWC1' was not declared in this scope

pinMode(MY_SWC1, INPUT_PULLUP);

      ^

SensebenderGatewaySerial:117:10: error: 'MY_SWC2' was not declared in this scope

pinMode(MY_SWC2, INPUT_PULLUP);

      ^

SensebenderGatewaySerial:130:17: error: 'LED_BLUE' was not declared in this scope

digitalWrite(LED_BLUE, led_state);

             ^

SensebenderGatewaySerial:145:16: error: 'LED_GREEN' was not declared in this scope

digitalWrite(LED_GREEN, HIGH);

            ^

SensebenderGatewaySerial:149:16: error: 'LED_YELLOW' was not declared in this scope

digitalWrite(LED_YELLOW, HIGH);

            ^

SensebenderGatewaySerial:154:16: error: 'LED_ORANGE' was not declared in this scope

digitalWrite(LED_ORANGE, HIGH);

            ^

SensebenderGatewaySerial:167:17: error: 'LED_RED' was not declared in this scope

digitalWrite(LED_RED, HIGH);

             ^

C:\Users\Piotrek\Desktop\SensebenderGatewaySerial-sketch\SensebenderGatewaySerial\SensebenderGatewaySerial.ino: In function 'bool testSDCard()':

SensebenderGatewaySerial:219:33: error: 'MY_SDCARD_CS' was not declared in this scope

if (!card.init(SPI_HALF_SPEED, MY_SDCARD_CS)) {

                             ^

C:\Users\Piotrek\Desktop\SensebenderGatewaySerial-sketch\SensebenderGatewaySerial\SensebenderGatewaySerial.ino: In function 'bool testEEProm()':

SensebenderGatewaySerial:249:2: error: 'SerialUSB' was not declared in this scope

SerialUSB.print(" -> EEPROM ");

^

C:\Users\Piotrek\Desktop\SensebenderGatewaySerial-sketch\SensebenderGatewaySerial\SensebenderGatewaySerial.ino: In function 'bool testAnalog()':

SensebenderGatewaySerial:267:30: error: 'MY_BAT_DETECT' was not declared in this scope

int bat_detect = analogRead(MY_BAT_DETECT);

                          ^

exit status 1
'LED_BLUE' was not declared in this scope

What is error ? please help me

[pepson]

I also can not install board in Arduino IDE 1.8.9

[pepson]

please help
https://forum.mysensors.org/topic/10548/solved-sensbender-gateway-gives-a-lot-of-hu/2

[magpern]

@pepson said in 💬 Sensebender Gateway:

hi
when i try compile sketch only with change radio to rfm69hw i have this:
Arduino:1.8.9 (Windows 10), Płytka:"Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

SensebenderGatewaySerial:95:26: error: 'LED_BLUE' was not declared in this scope

You cannot use the SensebenderGatewaySerial sketch on an Atmega2560. The SensbenderGatewaySerial sketch is for the SAMD board called Sensebender Gateway.

If you have the real Sensebender Gateway you should use this one

[pepson]

@magpern
But get this board to Arduino IDE?

[magpern]

@pepson said in 💬 Sensebender Gateway:

@magpern
But get this board to Arduino IDE?

Boards / Boards manager...
search for sensebender

You might have to

File / Preferences / Additional Board manager URLs
add
https://raw.githubusercontent.com/mysensors/ArduinoBoards/master/package_mysensors.org_index.json

[pepson]

Hi
I compiled and write to gateway this programmm. Then i connected it to my RPI with Hassio (Home Assistant). In logs on home assistant still show me info: Gateway /dev/serial/by-id/usb-MySensors.org_Sensebender_GW_6A153443514D355934202020FF10182D-if00 not ready after 15.0 secs so continuing with setup

but after run Home Assistant gateway works ok. I send info mto developer Home Assistant ans she not see any bugs....
How i can resolved this problem ?

[pepson]

And please help me how i can compile it as gateway Ethernet with module W5100.

Only add to sketch:
// Enable gateway ethernet module type
#define MY_GATEWAY_W5100

// Enable to UDP
//#define MY_USE_UDP

//#define MY_IP_ADDRESS 192,168,3,160 // wpisz adres ip bramki
// Renewal period if using DHCP
//#define MY_IP_RENEWAL_INTERVAL 60000
// The port to keep open on node server mode / or port to contact in client mode
#define MY_PORT 5003 //wpisz numer portu bramki

// Controller ip address. Enables client mode (default is "server" mode).
// Also enable this if MY_USE_UDP is used and you want sensor data sent somewhere.
//#define MY_CONTROLLER_IP_ADDRESS 192, 168, 178, 254

// The MAC address can be anything you want but should be unique on your network.
// Newer boards have a MAC address printed on the underside of the PCB, which you can (optionally) use.
// Note that most of the Ardunio examples use "DEAD BEEF FEED" for the MAC address.
#define MY_MAC_ADDRESS 0xDC, 0xAE, 0xB2, 0x3F, 0xFF, 0xDC

???

[pepson]

When try compilation with this W5100 i get error:

Opcje projektu zmienione, przeładuj całość
In file included from C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/MySensors.h:208:0,

             from C:\Users\Piotrek\Desktop\SensebenderGatewayETHERNET\SensebenderGatewayETHERNET.ino:111:

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:74:1: error: 'EthernetServer' does not name a type

EthernetServer _ethernetServer(_ethernetGatewayPort);

^~~~~~~~~~~~~~

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:89:8: error: 'EthernetClient' does not name a type

static EthernetClient client = EthernetClient();

    ^~~~~~~~~~~~~~

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp: In function 'bool gatewayTransportInit()':

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:149:7: error: 'Ethernet' was not declared in this scope

if (!Ethernet.begin(_ethernetGatewayMAC)) {

   ^~~~~~~~

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:149:7: note: suggested alternative: '_ethernetMsg'

if (!Ethernet.begin(_ethernetGatewayMAC)) {

   ^~~~~~~~

   _ethernetMsg

In file included from C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/MySensors.h:49:0,

             from C:\Users\Piotrek\Desktop\SensebenderGatewayETHERNET\SensebenderGatewayETHERNET.ino:111:

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:156:16: error: 'Ethernet' was not declared in this scope

            Ethernet.localIP()[0],

            ^

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/MyConfig.h:1815:48: note: in definition of macro 'DEBUG_OUTPUT'

#define DEBUG_OUTPUT(x,...) hwDebugPrint(x, ##VA_ARGS) //!< debug

                                            ^~~~~~~~~~~

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:155:2: note: in expansion of macro 'GATEWAY_DEBUG'

GATEWAY_DEBUG(PSTR("GWT:TIN:IP=%" PRIu8 ".%" PRIu8 ".%" PRIu8 ".%" PRIu8 "\n"),

^~~~~~~~~~~~~

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:156:16: note: suggested alternative: '_ethernetMsg'

            Ethernet.localIP()[0],

            ^

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/MyConfig.h:1815:48: note: in definition of macro 'DEBUG_OUTPUT'

#define DEBUG_OUTPUT(x,...) hwDebugPrint(x, ##VA_ARGS) //!< debug

                                            ^~~~~~~~~~~

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:155:2: note: in expansion of macro 'GATEWAY_DEBUG'

GATEWAY_DEBUG(PSTR("GWT:TIN:IP=%" PRIu8 ".%" PRIu8 ".%" PRIu8 ".%" PRIu8 "\n"),

^~~~~~~~~~~~~

In file included from C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/MySensors.h:208:0,

             from C:\Users\Piotrek\Desktop\SensebenderGatewayETHERNET\SensebenderGatewayETHERNET.ino:111:

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:189:2: error: '_ethernetServer' was not declared in this scope

_ethernetServer.begin();

^~~~~~~~~~~~~~~

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:189:2: note: suggested alternative: '_ethernetMsg'

_ethernetServer.begin();

^~~~~~~~~~~~~~~

_ethernetMsg

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp: In function 'bool gatewayTransportSend(MyMessage&)':

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:246:11: error: '_ethernetServer' was not declared in this scope

nbytes = _ethernetServer.write(_ethernetMsg);

       ^~~~~~~~~~~~~~~

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:246:11: note: suggested alternative: '_ethernetMsg'

nbytes = _ethernetServer.write(_ethernetMsg);

       ^~~~~~~~~~~~~~~

       _ethernetMsg

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp: In function 'bool _readFromClient()':

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:289:9: error: 'client' was not declared in this scope

while (client.connected() && client.available()) {

     ^~~~~~

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:289:9: note: suggested alternative: 'Print'

while (client.connected() && client.available()) {

     ^~~~~~

     Print

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp: In function 'bool gatewayTransportAvailable()':

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:409:2: error: 'EthernetClient' was not declared in this scope

EthernetClient newclient = _ethernetServer.available();

^~~~~~~~~~~~~~

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:411:6: error: 'newclient' was not declared in this scope

if (newclient) {

  ^~~~~~~~~

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:412:7: error: 'client' was not declared in this scope

if (client != newclient) {

   ^~~~~~

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:412:7: note: suggested alternative: 'Print'

if (client != newclient) {

   ^~~~~~

   Print

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:422:6: error: 'client' was not declared in this scope

if (client) {

  ^~~~~~

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:422:6: note: suggested alternative: 'Print'

if (client) {

  ^~~~~~

  Print

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp: In function 'void gatewayTransportRenewIP()':

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:463:6: error: 'Ethernet' was not declared in this scope

if (Ethernet.maintain() & ~(0x06)) {

  ^~~~~~~~

C:\Users\Piotrek\Documents\Arduino\libraries\MySensors/core/MyGatewayTransportEthernet.cpp:463:6: note: suggested alternative: '_ethernetMsg'

if (Ethernet.maintain() & ~(0x06)) {

  ^~~~~~~~

  _ethernetMsg

exit status 1
Błąd kompilacji dla płytki Sensebender Gateway.

What is a problem ?

[pepson]

please help me....