@epierre said: Hello, have you contacted Itead support on this ? I bought one too but had no time to test it yet (In fact I was waiting for you ;-) No worries, @epierre . I put a test webserver on the iBoard to make sure it was working OK. I was able to browse an SD card over ethernet so I didn't want to bother their support people. I never heard from @nneeoo and just decided to go the hardware route. It seems to be working just fine. I recommend it. It's more stable than the serial gateway I was running.

@TimO Thank you very much for your help, now I succesfully connected my iboard card as LAN Gateway without doing any HW modification and even any software modification to any library, simply using the sketch you sent here. For general information to other people that want to use the iboard card with Domoticz, to avoid any problem like the following: 2016-12-18 12:06:40.840 MySensors: trying to connect to: 192.168.1.133:5603 2016-12-18 12:06:41.841 MySensors: connected to: 192.168.1.133:5603 2016-12-18 12:06:45.841 MySensors: Connection reset! 2016-12-18 12:06:45.842 TCP: Reconnecting in 30 seconds... Consider to use the Arduino IDE 1.6.8 to compile and upload the sketch, otherwise, with newest Arduino IDE you will get the error messages above. Thank you again for you help and a big hello to all the members of the forum. Regards