Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you may not be able to execute some actions.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

Issues with MYSBootloader, Anyone a working version?

martim last edited by

Hi,

I have a gateway on PI with the latest mysensors (2.3.1). Know I have a MYSBootloader for my slim node board (8 Mhz) which works fine on OTA but serial doesn't. When I try to download the latest one: https://github.com/mysensors/MySensorsBootloaderRF24/blob/development/hex/MYSBootloader_8MHz.hex
then Serial works fine but OTA does not work?? My gateway uses MQTT and with the first one, you will see a nice publish of the node. Something like mysensors-out/5/255/4/0/0 010001009005272A0103 but with the latest this is not available and I cannot upload my code using mycontroller.org.

So I assume the latest bootloader is not working on my 8Mhz board. Does anyone have a working version? Serial and OTA which I can try?

Or other suggestions?

Thanks!
Reply Quote 0
1 Reply Last reply

1
Posts

435
Views

Suggested Topics

Arduino Celebrates 10 years (Malmö/Sweden)
Announcements • • hek

1

0
Votes

1
Posts

3304
Views

No one has replied
FOTA using OptiBoot copy_flash_pages
Development • • eiten

2

0
Votes

2
Posts

20
Views

IT WORKS I got a first working version, using an ATmega1284P running on MightyCore 2.2.2 (as soon as I began developement, they switched from Optiboot to Urboot in version 3.0.0, whicht does not include the copy_flash_pages function anymore, but I'm working on a work around there). Only thing I could not solve is to do a CRC check of the image after download... You can try it out here: https://github.com/eiten/MySensors/tree/FOTAInternalFlashTest It's not beautiful yet with much Serial.prints in it, but maybe it helps you if you find errors.
MYSController with MQTT Gateway (via Node Red)
Development • • slt1

1

1
Votes

1
Posts

10
Views

No one has replied
[mysensors] Not a valid message: invalid literal for int() with base 10: '\x00\x000'
Development • • kiesel

3

0
Votes

3
Posts

15
Views

Thanks, I'll keep this in mind if I decide to debug it. I realized that I am also tired of patching the gateway through to the doctor container inside an LXC so now I am looking at creating an esp gateway. Just need to check if I can find a pcb on here. Thanks again!
MQTT GW on ESP8266 supporting SSL/TLS?
Development • esp8266 mqtt gw • • bgunnarb

6

0
Votes

6
Posts

27
Views

@bgunnarb I like @eiten 's solution for you. Personally, I am not a fan of using cloud/public brokers. Thus I am curious about your system and there is something about it from which I can learn. I would like to understand why you cannot deploy your own mosquitto broker. I see your set up as 3 sensor groups defined by the channel used #define MY_RF24_CHANNEL ChannelOfSensorGroup Each sensor group has some number of sensors and one MQTT GW on ESP8266. On the MQTT side, do you distinguish between gateways by using a different host name? Something like: #define MY_MQTT_PUBLISH_TOPIC_PREFIX "mygateway-nOf3-out" #define MY_MQTT_SUBSCRIBE_TOPIC_PREFIX "mygateway-nOf3-in" #define MY_MQTT_CLIENT_ID "mysensors-nOf3" #define MY_HOSTNAME "ESP8266_MQTT_GW_nOf3" //#define MY_CONTROLLER_IP_ADDRESS 192, 168, 178, 68 #define MY_CONTROLLER_URL_ADDRESS "test.mosquitto.org" #define MY_PORT 1883 I must assume your controller (aka Home Assistant) discriminates between through which gateway the data is to flow by way of the different topic names. If my "something like" is correct, then changing brokers is changing the IPaddress/URL in your gateways and in your controller (though if the controller is Home Assistant, it may be a bother because the device-id's may change which will make a mess of all the work you've done in HA. This is why I like @eiten 's solution.) I hope it's all working for you again. OSD
MYSBootloader 1.3 pre-release & MYSController 1.0.0beta
Development • ota myscontroller mysbootloader • • tekka

198

13
Votes

198
Posts

84990
Views

@tekka Is there any changelog to it also or it was just made officially available again? although last online status was 22 AUG 2020, so anyone else can confirm anything about it? I'd just be cautious without confirmation.

Issues with MYSBootloader, Anyone a working version?

Suggested Topics

Arduino Celebrates 10 years (Malmö/Sweden)
Announcements • • hek

FOTA using OptiBoot copy_flash_pages
Development • • eiten

MYSController with MQTT Gateway (via Node Red)
Development • • slt1

[mysensors] Not a valid message: invalid literal for int() with base 10: '\x00\x000'
Development • • kiesel

MQTT GW on ESP8266 supporting SSL/TLS?
Development • esp8266 mqtt gw • • bgunnarb

MYSBootloader 1.3 pre-release & MYSController 1.0.0beta
Development • ota myscontroller mysbootloader • • tekka

56
Online

11.4k
Users

11.1k
Topics

112.6k
Posts

Issues with MYSBootloader, Anyone a working version?

Suggested Topics

Arduino Celebrates 10 years (Malmö/Sweden) Announcements • • hek

FOTA using OptiBoot copy_flash_pages Development • • eiten

MYSController with MQTT Gateway (via Node Red) Development • • slt1

[mysensors] Not a valid message: invalid literal for int() with base 10: '\x00\x000' Development • • kiesel

MQTT GW on ESP8266 supporting SSL/TLS? Development • esp8266 mqtt gw • • bgunnarb

MYSBootloader 1.3 pre-release & MYSController 1.0.0beta Development • ota myscontroller mysbootloader • • tekka

56Online

11.4kUsers

11.1kTopics

112.6kPosts

Arduino Celebrates 10 years (Malmö/Sweden)
Announcements • • hek

FOTA using OptiBoot copy_flash_pages
Development • • eiten

MYSController with MQTT Gateway (via Node Red)
Development • • slt1

[mysensors] Not a valid message: invalid literal for int() with base 10: '\x00\x000'
Development • • kiesel

MQTT GW on ESP8266 supporting SSL/TLS?
Development • esp8266 mqtt gw • • bgunnarb

MYSBootloader 1.3 pre-release & MYSController 1.0.0beta
Development • ota myscontroller mysbootloader • • tekka

56
Online

11.4k
Users

11.1k
Topics

112.6k
Posts